Author
Nikolai N. Ledentsov
Other affiliations: Max Planck Society, Technical University of Berlin, Saint Petersburg State University of Information Technologies, Mechanics and Optics ...read more
Bio: Nikolai N. Ledentsov is an academic researcher from Russian Academy of Sciences. The author has contributed to research in topics: Quantum dot & Quantum dot laser. The author has an hindex of 42, co-authored 283 publications receiving 10676 citations. Previous affiliations of Nikolai N. Ledentsov include Max Planck Society & Technical University of Berlin.
Papers published on a yearly basis
Papers
More filters
•
01 Jan 1999
TL;DR: In this paper, the growth and structural characterisation of self-organized Quantum Dots are discussed. But they do not consider the model of ideal and real quantum Dots.
Abstract: Fabrication Techniques for Quantum Dots. Self-Organization Concepts on Crystal Surfaces. Growth and Structural Characterization of Self-Organized Quantum Dots. Modeling of Ideal and Real Quantum Dots. Electronic and Optical Properties. Electrical Properties. Photonic Devices. References. Index.
2,356 citations
••
TL;DR: The InGaAs-GaAs QD emission can be tuned between 0.95 /spl mu/m and 1.37 /spl middot/cm/sup -2/m at 300 K as mentioned in this paper.
Abstract: Quantum-dot (QD) lasers provide superior lasing characteristics compared to quantum-well (QW) and QW wire lasers due to their delta like density of states. Record threshold current densities of 40 A/spl middot/cm/sup -2/ at 77 K and of 62 A/spl middot/cm/sup -2/ at 300 K are obtained while a characteristic temperature of 385 K is maintained up to 300 K. The internal quantum efficiency approaches values of /spl sim/80 %. Currently, operating QD lasers show broad-gain spectra with full-width at half-maximum (FWHM) up to /spl sim/50 meV, ultrahigh material gain of /spl sim/10/sup 5/ cm/sup -1/, differential gain of /spl sim/10/sup -13/ cm/sup 2/ and strong nonlinear gain effects with a gain compression coefficient of /spl sim/10/sup -16/ cm/sup 3/. The modulation bandwidth is limited by nonlinear gain effects but can be increased by careful choice of the energy difference between QD and barrier states. The linewidth enhancement factor is /spl sim/0.5. The InGaAs-GaAs QD emission can be tuned between 0.95 /spl mu/m and 1.37 /spl mu/m at 300 K.
512 citations
••
TL;DR: In this paper, the authors studied the energy of an array of coherent strained islands on a lattice-mismatched substrate and showed that the contribution of the edges of islands to the elastic relaxation energy always has a minimum as a function of the size of an island, and the total energy may have a minimum at an optimum size.
Abstract: The energetics of an array of three-dimensional coherent strained islands on a lattice-mismatched substrate is studied. The contribution of the edges of islands to the elastic relaxation energy always has a minimum as a function of the size of an island $L$, and the total energy $E(L)$ may have a minimum at an optimum size ${L}_{\mathrm{opt}}$. Among different arrays of islands on the (001) surface of a cubic crystal, the total energy is minimum for the 2D periodic square lattice with primitive lattice vectors along ``soft'' directions [100] and [010]. This is a stable array of islands which do not undergo ripening.
476 citations
••
TL;DR: In this paper, the authors demonstrate inelastic phonon scattering to be the dominant intradot carrier-relaxation mechanism in self-organized InAs/GaAs quantum dots.
Abstract: Carrier relaxation and recombination in self-organized InAs/GaAs quantum dots (QD's) is investigated by photoluminescence (PL), PL excitation (PLE), and time-resolved PL spectroscopy We demonstrate inelastic phonon scattering to be the dominant intradot carrier-relaxation mechanism Multiphonon processes involving up to four LO phonons from either the InAs QD's, the InAs wetting layer, or the GaAs barrier are resolved The observation of multiphonon resonances in the PLE spectra of the QD's is discussed in analogy to hot exciton relaxation in higher-dimensional semiconductor systems and proposed to be intricately bound to the inhomogeneity of the QD ensemble in conjunction with a competing nonradiative recombination channel observed for the excited hole states Carrier capture is found to be a cascade process with the initial capture into excited states taking less than a few picoseconds and the multiphonon (involving three LO phonons) relaxation time of the first excited hole state being 40 ps The |001〉 hole state presents a relaxation bottleneck that determines the ground-state population time after nonresonant excitation For the small self-organized InAs/GaAs QD's the intradot carrier relaxation is shown to be faster than radiative (g1 ns) and nonradiative (\ensuremath{\approx}100 ps) recombination explaining the absence of a ``phonon bottleneck'' effect in the PL spectra
408 citations
••
TL;DR: In this article, the lateral size of InAs islands has been found to be approximately 1.5 times larger as compared to the InAs/GaAs case, whereas the island heights and surface densities were close in both cases.
Abstract: InAs self-organized quantum dots inserted in InGaAs quantum well have been grown on GaAs substrates by molecular beam epitaxy. The lateral size of the InAs islands has been found to be approximately 1.5 times larger as compared to the InAs/GaAs case, whereas the island heights and surface densities were close in both cases. The quantum dot emission wavelength can be controllably changed from 1.1 to 1.3 μm by varying the composition of the InGaAs quantum well matrix. Photoluminescence at 1.33 μm from vertical optical microcavities containing the InAs/InGaAs quantum dot array was demonstrated.
359 citations
Cited by
More filters
••
TL;DR: The interest in nanoscale materials stems from the fact that new properties are acquired at this length scale and, equally important, that these properties are equally important.
Abstract: The interest in nanoscale materials stems from the fact that new properties are acquired at this length scale and, equally important, that these properties * To whom correspondence should be addressed. Phone, 404-8940292; fax, 404-894-0294; e-mail, mostafa.el-sayed@ chemistry.gatech.edu. † Case Western Reserve UniversitysMillis 2258. ‡ Phone, 216-368-5918; fax, 216-368-3006; e-mail, burda@case.edu. § Georgia Institute of Technology. 1025 Chem. Rev. 2005, 105, 1025−1102
6,852 citations
••
TL;DR: A comprehensive review of current research activities that center on the shape-controlled synthesis of metal nanocrystals, including a brief introduction to nucleation and growth within the context of metal Nanocrystal synthesis, followed by a discussion of the possible shapes that aMetal nanocrystal might take under different conditions.
Abstract: Nanocrystals are fundamental to modern science and technology. Mastery over the shape of a nanocrystal enables control of its properties and enhancement of its usefulness for a given application. Our aim is to present a comprehensive review of current research activities that center on the shape-controlled synthesis of metal nanocrystals. We begin with a brief introduction to nucleation and growth within the context of metal nanocrystal synthesis, followed by a discussion of the possible shapes that a metal nanocrystal might take under different conditions. We then focus on a variety of experimental parameters that have been explored to manipulate the nucleation and growth of metal nanocrystals in solution-phase syntheses in an effort to generate specific shapes. We then elaborate on these approaches by selecting examples in which there is already reasonable understanding for the observed shape control or at least the protocols have proven to be reproducible and controllable. Finally, we highlight a number of applications that have been enabled and/or enhanced by the shape-controlled synthesis of metal nanocrystals. We conclude this article with personal perspectives on the directions toward which future research in this field might take.
4,927 citations
••
TL;DR: In this article, the authors examined the competing dynamical processes involved in optical amplification and lasing in nanocrystal quantum dots and found that, despite a highly efficient intrinsic nonradiative Auger recombination, large optical gain can be developed at the wavelength of the emitting transition for close-packed solids of these dots.
Abstract: The development of optical gain in chemically synthesized semiconductor nanoparticles (nanocrystal quantum dots) has been intensely studied as the first step toward nanocrystal quantum dot lasers. We examined the competing dynamical processes involved in optical amplification and lasing in nanocrystal quantum dots and found that, despite a highly efficient intrinsic nonradiative Auger recombination, large optical gain can be developed at the wavelength of the emitting transition for close-packed solids of these dots. Narrowband stimulated emission with a pronounced gain threshold at wavelengths tunable with the size of the nanocrystal was observed, as expected from quantum confinement effects. These results unambiguously demonstrate the feasibility of nanocrystal quantum dot lasers.
2,535 citations
••
TL;DR: Most of the plants used in metal nanoparticle synthesis are shown in this article, and the advantages of using plant and plant-derived materials for biosynthesis of metal nanoparticles have interested researchers to investigate mechanisms of metal ions uptake and bioreduction by plants, and to understand the possible mechanism of nanoparticle formation in plants.
2,424 citations
••
TL;DR: In plasmonics, the metal nanostructures can serve as antennas to convert light into localized electric fields (E-fields) or as waveguides to route light to desired locations with nanometer precision through a strong interaction between incident light and free electrons in the nanostructure.
Abstract: Coinage metals, such as Au, Ag, and Cu, have been important materials throughout history.1 While in ancient cultures they were admired primarily for their ability to reflect light, their applications have become far more sophisticated with our increased understanding and control of the atomic world. Today, these metals are widely used in electronics, catalysis, and as structural materials, but when they are fashioned into structures with nanometer-sized dimensions, they also become enablers for a completely different set of applications that involve light. These new applications go far beyond merely reflecting light, and have renewed our interest in maneuvering the interactions between metals and light in a field known as plasmonics.2–6
In plasmonics, the metal nanostructures can serve as antennas to convert light into localized electric fields (E-fields) or as waveguides to route light to desired locations with nanometer precision. These applications are made possible through a strong interaction between incident light and free electrons in the nanostructures. With a tight control over the nanostructures in terms of size and shape, light can be effectively manipulated and controlled with unprecedented accuracy.3,7 While many new technologies stand to be realized from plasmonics, with notable examples including superlenses,8 invisible cloaks,9 and quantum computing,10,11 conventional technologies like microprocessors and photovoltaic devices could also be made significantly faster and more efficient with the integration of plasmonic nanostructures.12–15 Of the metals, Ag has probably played the most important role in the development of plasmonics, and its unique properties make it well-suited for most of the next-generation plasmonic technologies.16–18
1.1. What is Plasmonics?
Plasmonics is related to the localization, guiding, and manipulation of electromagnetic waves beyond the diffraction limit and down to the nanometer length scale.4,6 The key component of plasmonics is a metal, because it supports surface plasmon polariton modes (indicated as surface plasmons or SPs throughout this review), which are electromagnetic waves coupled to the collective oscillations of free electrons in the metal.
While there are a rich variety of plasmonic metal nanostructures, they can be differentiated based on the plasmonic modes they support: localized surface plasmons (LSPs) or propagating surface plasmons (PSPs).5,19 In LSPs, the time-varying electric field associated with the light (Eo) exerts a force on the gas of negatively charged electrons in the conduction band of the metal and drives them to oscillate collectively. At a certain excitation frequency (w), this oscillation will be in resonance with the incident light, resulting in a strong oscillation of the surface electrons, commonly known as a localized surface plasmon resonance (LSPR) mode.20 This phenomenon is illustrated in Figure 1A. Structures that support LSPRs experience a uniform Eo when excited by light as their dimensions are much smaller than the wavelength of the light.
Figure 1
Schematic illustration of the two types of plasmonic nanostructures discussed in this article as excited by the electric field (Eo) of incident light with wavevector (k). In (A) the nanostructure is smaller than the wavelength of light and the free electrons ...
In contrast, PSPs are supported by structures that have at least one dimension that approaches the excitation wavelength, as shown in Figure 1B.4 In this case, the Eo is not uniform across the structure and other effects must be considered. In such a structure, like a nanowire for example, SPs propagate back and forth between the ends of the structure. This can be described as a Fabry-Perot resonator with resonance condition l=nλsp, where l is the length of the nanowire, n is an integer, and λsp is the wavelength of the PSP mode.21,22 Reflection from the ends of the structure must also be considered, which can change the phase and resonant length. Propagation lengths can be in the tens of micrometers (for nanowires) and the PSP waves can be manipulated by controlling the geometrical parameters of the structure.23
2,421 citations