Currently, however, there are relatively few such atomically layered solids. [ 2–5 ] Here, we report on 2D nanosheets, composed of a few Ti 3 C 2 layers and conical scrolls, produced by the room temperature exfoliation of Ti 3 AlC 2 in hydrofl uoric acid. The large elastic moduli predicted by ab initio simulation, and the possibility of varying their surface chemistries (herein they are terminated by hydroxyl and/or fl uorine groups) render these nanosheets attractive as polymer composite fi llers. Theory also predicts that their bandgap can be tuned by varying their surface terminations. The good conductivity and ductility of the treated powders suggest uses in Li-ion batteries, pseudocapacitors, and other electronic applications. Since Ti 3 AlC 2 is a member of a 60 + group of layered ternary carbides and nitrides known as the MAX phases, this discovery opens a door to the synthesis of a large number of other 2D crystals. Arguably the most studied freestanding 2D material is graphene, which was produced by mechanical exfoliation into single-layers in 2004. [ 1 ] Some other layered materials, such as hexagonal BN, [ 2 ] transition metal oxides, and hydroxides, [ 4 ] as well as clays, [ 3 ] have also been exfoliated into 2D sheets. Interestingly, exfoliated MoS 2 single layers were reported as early as in 1986. [ 5 ] Graphene is fi nding its way to applications ranging from supercapacitor electrodes [ 6 ] to reinforcement in composites. [ 7 ] Although graphene has attracted more attention than all other 2D materials combined, its simple chemistry and the weak van der Waals bonding between layers in multilayer structures limit its use. Complex, layered structures that contain more than one element may offer new properties because they

/pdf/two-dimensional-nanocrystals-produced-by-exfoliation-of-ti-3-53630vx2ff.pdf

Two‐Dimensional Nanocrystals Produced by Exfoliation of Ti 3 AlC 2

The MN+1AXN phases: A new class of solids

Two-dimensional (2D) transition metal carbides, carbonitrides, and nitrides (MXenes) were discovered in 2011. Since the original discovery, more than 20 different compositions have been synthesized by the selective etching of MAX phase and other precursors and many more theoretically predicted. They offer a variety of different properties, making the family promising candidates in a wide range of applications, such as energy storage, electromagnetic interference shielding, water purification, electrocatalysis, and medicine. These solution-processable materials have the potential to be highly scalable, deposited by spin, spray, or dip coating, painted or printed, or fabricated in a variety of ways. Due to this promise, the amount of research on MXenes has been increasing, and methods of synthesis and processing are expanding quickly. The fast evolution of the material can also be noticed in the wide range of synthesis and processing protocols that determine the yield of delamination, as well as the quality...

Guidelines for Synthesis and Processing of Two-Dimensional Titanium Carbide (Ti3C2Tx MXene)

http://liu.diva-portal.org/smash/get/diva2:303552/FULLTEXT01

The Mn+1AXn phases: Materials science and thin-film processing

The MAX phases are a group of layered ternary compounds with the general formula Mn+1AXn (M: early transition metal; A: group A element; X: C and/or N; n = 1–3), which combine some properties of metals, such as good electrical and thermal conductivity, machinability, low hardness, thermal shock resistance and damage tolerance, with those of ceramics, such as high elastic moduli, high temperature strength, and oxidation and corrosion resistance. The publication of papers on the MAX phases has shown an almost exponential increase in the past decade. The existence of further MAX phases has been reported or proposed. In addition to surveying this activity, the synthesis of MAX phases in the forms of bulk, films and powders is reviewed, together with their physical, mechanical and corrosion/oxidation properties. Recent research and development has revealed potential for the practical application of the MAX phases (particularly using the pressureless sintering and physical vapour deposition coating rout...

Progress in research and development on MAX phases: a family of layered ternary compounds

Polycrystalline bulk samples of Ti 3 Al 1.1 C 1.8 have been fabricated by reactively hot isostatically pressing a mixture of titanium, graphite, and Al 4 C 3 powders at a pressure of 70 MPa and temperature of 1400°C for 16 h. The hot isostatically pressed samples are predominantly single phase (containing ∼4 vol% Al 2 O 3 ), fully dense, and have a grain size of ∼25 μm. This carbide is similar to Ti 3 SiC 2 , with which it is isostructural, and has an unusual combination of properties. It is relatively soft (Vickers hardness of ∼3.5 GPa) and elastically stiff (Young's modulus of 297 GPa and shear modulus of 124 GPa); yet, it is lightweight (density of 4.2 g/cm 3 ) and easily machinable. The room-temperature electrical resistivity is 0.35 ± 0.03 μΩ.m and decreases linearly as the temperature decreases. The temperature coefficient of resistivity is 0.0031 K -1 . The coefficient of thermal expansion, in the temperature range of 25°-1200°C, is 9.0 (± 0.2) x 10 -6 K -1 . The room-temperature compressive and flexural strengths are 560 ± 20 and 375 ± 15 MPa, respectively. In contrast to flexure, where the failure is brittle, the failure in compression is noncatastrophic and is accompanied by some plasticity. The origin of that plasticity is believed to be the formation of a shear band that is oriented at an angle of ∼45° to the applied load. Ti 3 Al 1.1 C 1.8 also is a highly damage-tolerant material; a 10-kg-load Vickers indentation made in a bar 1.5 mm thick reduces the postindentation flexural strength by ∼7%. This material also is quite resistant to thermal shock. At temperatures of >1000°C, the deformation in compression is accompanied by significant plasticity and very respectable ultimate compressive stresses (200 MPa at 1200°C).

Nikolay V. Tzenov

Papers

Synthesis and Characterization of Ti3AlC2

Synthesis and Characterization of Ti3AlC2.