Ning Dai

Bio: Ning Dai is an academic researcher from Chinese Academy of Sciences. The author has contributed to research in topics: Thin film & Quantum dot. The author has an hindex of 23, co-authored 200 publications receiving 2477 citations. Previous affiliations of Ning Dai include University of Science and Technology of China.

Interlayer Transition and Infrared Photodetection in Atomically Thin Type-II MoTe2/MoS2 van der Waals Heterostructures

Abstract: We demonstrate the type-II staggered band alignment in MoTe2/MoS2 van der Waals (vdW) heterostructures and an interlayer optical transition at ∼1.55 μm. The photoinduced charge separation between the MoTe2/MoS2 vdW heterostructure is verified by Kelvin probe force microscopy (KPFM) under illumination, density function theory (DFT) simulations and photoluminescence (PL) spectroscopy. Photoelectrical measurements of MoTe2/MoS2 vdW heterostructures show a distinct photocurrent response in the infrared regime (1550 nm). The creation of type-II vdW heterostructures with strong interlayer coupling could improve our fundamental understanding of the essential physics behind vdW heterostructures and help the design of next-generation infrared optoelectronics.

Tailor the functionalities of metasurfaces based on a complete phase diagram

Abstract: Metal/insulator/metal metasurfaces have widely applications ranging from perfect absorption to phase modulation, but the mechanism of these functionalities are not yet fully understood. Here, based on a coupled-mode analysis, we establish a complete phase diagram through two simple parameters, which lays a solid basis for realizing functional and tunable photonic devices with such structures.

Surface-Dependent Localized Surface Plasmon Resonances in CuS Nanodisks

Abstract: We demonstrated revertible shifts of surface-dependent localized surface plasmon resonances (LSPRs) in CuS nanodisks. Oleylamine (OYA) served as a solvent and surface ligand covering on CuS nanodisks during the thermolysis of single-source precursor copper ethylxanthate (Cu(ex)2). When OYA ligand was unloaded and reloaded on the surface of CuS nanodisks, the wavelength of LSPRs blue-shifted due to more oxygen exposure and then reverted through surface repassivation. The surface-dependent shift of LSPRs was dominated by the concentration of free holes in CuS nanodisks, which was modulated by the coverage and exchange of surface ligands, and the oxygen exposure dose and time. The semiconductor nanocrystals with tunable LSPRs have great potential in advanced plasmonics.

Effects of Al Doping on the Properties of ZnO Thin Films Deposited by Atomic Layer Deposition

Abstract: The tuning of structural, optical, and electrical properties of Al-doped ZnO films deposited by atomic layer deposition technique is reported in this work. With the increasing Al doping level, the evolution from (002) to (100) diffraction peaks indicates the change in growth mode of ZnO films. Spectroscopic ellipsometry has been applied to study the thickness, optical constants, and band gap of AZO films. Due to the increasing carrier concentration after Al doping, a blue shift of band gap and absorption edge can be observed, which can be interpreted by Burstein-Moss effect. The carrier concentration and resistivity are found to vary significantly among different doping concentration, and the optimum value is also discussed. The modulations and improvements of properties are important for Al-doped ZnO films to apply as transparent conductor in various applications.

WO3 nanocrystals: Synthesis and application in highly sensitive detection of acetone

Abstract: WO3 nanocrystals have been prepared by a sol–gel route and characterized by X-ray diffractometry, scanning electron microscopy, and transmission electron microscopy. The experimental results show that WO3 nanocrystals have a high crystallographic quality and a good dispersivity. The particles’ sizes are in the range of 25–100 nm. The fabricated WO3 nanocrystal-based sensors have an excellent sensitivity and selectivity to acetone, and display a rapid response and recovery characteristics. The developed sensors exhibit a detection limit down to 0.05 ppm at 300 °C, rendering a promising application in noninvasive diagnosis of diabetes. The response mechanism of the WO3 nanocrystal sensor to low concentration of acetone has been discussed based on the depletion layer model.

Gas sensors using hierarchical and hollow oxide nanostructures: Overview

Abstract: Hierarchical and hollow oxide nanostructures are very promising gas sensor materials due to their high surface area and well-aligned nanoporous structures with a less agglomerated configurations. Various synthetic strategies to prepare such hierarchical and hollow structures for gas sensor applications are reviewed and the principle parameters and mechanisms to enhance the gas sensing characteristics are investigated. The literature data clearly show that hierarchical and hollow nanostructures increase both the gas response and response speed simultaneously and substantially. This can be explained by the rapid and effective gas diffusion toward the entire sensing surfaces via the porous structures. Finally, the impact of highly sensitive and fast responding gas sensors using hierarchical and hollow nanostructures on future research directions is discussed.

A broadband achromatic metalens for focusing and imaging in the visible.

Abstract: A key goal of metalens research is to achieve wavefront shaping of light using optical elements with thicknesses on the order of the wavelength. Such miniaturization is expected to lead to compact, nanoscale optical devices with applications in cameras, lighting, displays and wearable optics. However, retaining functionality while reducing device size has proven particularly challenging. For example, so far there has been no demonstration of broadband achromatic metalenses covering the entire visible spectrum. Here, we show that by judicious design of nanofins on a surface, it is possible to simultaneously control the phase, group delay and group delay dispersion of light, thereby achieving a transmissive achromatic metalens with large bandwidth. We demonstrate diffraction-limited achromatic focusing and achromatic imaging from 470 to 670 nm. Our metalens comprises only a single layer of nanostructures whose thickness is on the order of the wavelength, and does not involve spatial multiplexing or cascading. While this initial design (numerical aperture of 0.2) has an efficiency of about 20% at 500 nm, we discuss ways in which our approach may be further optimized to meet the demand of future applications. Controlling the geometry of each dielectric element of a nanostructured surface enables frequency-dependent group delay and group delay dispersion engineering, and the fabrication of an achromatic metalens for imaging in the visible in transmission.

Core–shell nanoparticles: synthesis and applications in catalysis and electrocatalysis

Abstract: Core–shell nanoparticles (CSNs) are a class of nanostructured materials that have recently received increased attention owing to their interesting properties and broad range of applications in catalysis, biology, materials chemistry and sensors. By rationally tuning the cores as well as the shells of such materials, a range of core–shell nanoparticles can be produced with tailorable properties that can play important roles in various catalytic processes and offer sustainable solutions to current energy problems. Various synthetic methods for preparing different classes of CSNs, including the Stober method, solvothermal method, one-pot synthetic method involving surfactants, etc., are briefly mentioned here. The roles of various classes of CSNs are exemplified for both catalytic and electrocatalytic applications, including oxidation, reduction, coupling reactions, etc.

Defect engineering of two-dimensional transition metal dichalcogenides

Abstract: Two-dimensional transition metal dichalcogenides (TMDs), an emerging family of layered materials, have provided researchers a fertile ground for harvesting fundamental science and emergent applications. TMDs can contain a number of different structural defects in their crystal lattices which significantly alter their physico-chemical properties. Having structural defects can be either detrimental or beneficial, depending on the targeted application. Therefore, a comprehensive understanding of structural defects is required. Here we review different defects in semiconducting TMDs by summarizing: (i) the dimensionalities and atomic structures of defects; (ii) the pathways to generating structural defects during and after synthesis and, (iii) the effects of having defects on the physico-chemical properties and applications of TMDs. Thus far, significant progress has been made, although we are probably still witnessing the tip of the iceberg. A better understanding and control of defects is important in order to move forward the field of Defect Engineering in TMDs. Finally, we also provide our perspective on the challenges and opportunities in this emerging field.