Ning Li

Bio: Ning Li is an academic researcher from University of Illinois at Urbana–Champaign. The author has contributed to research in topics: Topology control & Network topology. The author has an hindex of 9, co-authored 12 publications receiving 2392 citations.

Design and analysis of an MST-based topology control algorithm

Abstract: In this paper, we present a minimum spanning tree (MST) based topology control algorithm, called local minimum spanning tree (LMST), for wireless multi-hop networks. In this algorithm, each node builds its local minimum spanning tree independently and only keeps on-tree nodes that are one-hop away as its neighbors in the final topology. We analytically prove several important properties of LMST: (1) the topology derived under LMST preserves the network connectivity; (2) the node degree of any node in the resulting topology is bounded by 6; and (3) the topology can be transformed into one with bidirectional links (without impairing the network connectivity) after removal of all uni-directional links. These results are corroborated in the simulation study.

Design and analysis of an MST-based topology control algorithm

Abstract: In this paper, we present a minimum spanning tree (MST)-based algorithm, called local minimum spanning tree (LMST), for topology control in wireless multihop networks. In this algorithm, each node builds its LMST independently and only keeps on-tree nodes that are one-hop away as its neighbors in the final topology. We analytically prove several important properties of LMST: 1) the topology derived under LMST preserves the network connectivity; 2) the node degree of any node in the resulting topology is bounded by 6; and 3) the topology can be transformed into one with bidirectional links (without impairing the network connectivity) after removal of all unidirectional links. Simulation results show that LMST can increase the network capacity as well as reduce the energy consumption.

J-Sim: a simulation and emulation environment for wireless sensor networks

Abstract: Wireless sensor networks have gained considerable attention in the past few years. They have found application domains in battlefield communication, homeland security, pollution sensing, and traffic monitoring. As such, there has been an increasing need to define and develop simulation frameworks for carrying out high-fidelity WSN simulation. In this article we present a modeling, simulation, and emulation framework for WSNs in J-Sim - an open source, component-based compositional network simulation environment developed entirely in Java. This framework is built on the autonomous component architecture and extensible internetworking framework of J-Sim, and provides an object-oriented definition of target, sensor, and sink nodes, sensor and wireless communication channels, and physical media such as seismic channels, mobility models, and power models (both energy-producing and energy-consuming components). Application-specific models can be defined by subclassing classes in the simulation framework and customizing their behaviors. We also include in J-Sim a set of classes and mechanisms to realize network emulation. We demonstrate the use of the proposed WSN simulation framework by implementing several well-known localization, geographic routing, and directed diffusion protocols, and perform performance comparisons (in terms of the execution time incurred and memory used) in simulating WSN scenarios in J-Sim and ns-2. The simulation study indicates the WSN framework in J-Sim is much more scalable than ns-2 (especially in memory usage). We also demonstrate the use of the WSN framework in carrying out real-life full-fledged Future Combat System (FCS) simulation and emulation

FLSS: a fault-tolerant topology control algorithm for wireless networks

Abstract: Topology control algorithms usually reduce the number of links in a wireless network, which in turn decreases the degree of connectivity. The resulting network topology is more susceptible to system faults such as node failures and departures. In this paper, we consider k-vertex connectivity of a wireless network. We first present a centralized algorithm, Fault-tolerant Global Spanning Subgraph (FGSSk), which preserves k-vertex connectivity. FGSSk is min-max optimal, i.e., FGSSk minimizes the maximum transmission power used in the network, among all algorithms that preserve k-vertex connectivity. Based on FGSSk, we propose a localized algorithm, Fault-tolerant Local Spanning Subgraph (FLSSk). It is proved that FLSSk preserves k-vertex connectivity while maintaining bi-directionality of the network, and FLSSk is min-max optimal among all strictly localized algorithms. We then relax several widely used assumptions for topology control to enhance the practicality of FGSSk and FLSSk. Simulation results show that FLSSk is more power-efficient than other existing distributed/localized topology control algorithms.

Topology control in heterogeneous wireless networks: problems and solutions

Abstract: Previous work on topology control usually assumes homogeneous wireless nodes with uniform transmission ranges. In this paper, we propose two localized topology control algorithms for heterogeneous wireless multihop networks with nonuniform transmission ranges: directed relative neighborhood graph (DRNG) and directed local minimum spanning tree (DLMST). In both algorithms, each node selects a set of neighbors based on the locally collected information. We prove that (1) the topologies derived under DRNG and DLMST preserve the network connectivity; (2) the out degree of any node in the resulting topology by DLMST is bounded; while the out degree of nodes in the topology by DRNG is not bounded; and (3) the topologies generated by DRNG and DLMST preserve the network bi-directionality.

An overview of the OMNeT++ simulation environment

Abstract: The OMNeT++ discrete event simulation environment has been publicly available since 1997. It has been created with the simulation of communication networks, multiprocessors and other distributed systems in mind as application area, but instead of building a specialized simulator, OMNeT++ was designed to be as general as possible. Since then, the idea has proven to work, and OMNeT++ has been used in numerous domains from queuing network simulations to wireless and ad-hoc network simulations, from business process simulation to peer-to-peer network, optical switch and storage area network simulations. This paper presents an overview of the OMNeT++ framework, recent challenges brought about by the growing amount and complexity of third party simulation models, and the solutions we introduce in the next major revision of the simulation framework.

Topology Control in Wireless Ad Hoc and Sensor Networks

Abstract: Topology Control (TC) is one of the most important techniques used in wireless ad hoc and sensor networks to reduce energy consumption (which is essential to extend the network operational time) and radio interference (with a positive effect on the network traffic carrying capacity). The goal of this technique is to control the topology of the graph representing the communication links between network nodes with the purpose of maintaining some global graph property (e.g., connectivity), while reducing energy consumption and/or interference that are strictly related to the nodes' transmitting range. In this article, we state several problems related to topology control in wireless ad hoc and sensor networks, and we survey state-of-the-art solutions which have been proposed to tackle them. We also outline several directions for further research which we hope will motivate researchers to undertake additional studies in this field.

Bidirectionally Coupled Network and Road Traffic Simulation for Improved IVC Analysis

Abstract: Recently, many efforts have been made to develop more efficient Inter-Vehicle Communication (IVC) protocols for on-demand route planning according to observed traffic congestion or incidents, as well as for safety applications. Because practical experiments are often not feasible, simulation of network protocol behavior in Vehicular Ad Hoc Network (VANET) scenarios is strongly demanded for evaluating the applicability of developed network protocols. In this work, we discuss the need for bidirectional coupling of network simulation and road traffic microsimulation for evaluating IVC protocols. As the selection of a mobility model influences the outcome of simulations to a great extent, the use of a representative model is necessary for producing meaningful evaluation results. Based on these observations, we developed the hybrid simulation framework Veins (Vehicles in Network Simulation), composed of the network simulator OMNeT++ and the road traffic simulator SUMO. In a proof-of-concept study, we demonstrate its advantages and the need for bidirectionally coupled simulation based on the evaluation of two protocols for incident warning over VANETs. With our developed methodology, we can advance the state-of-the-art in performance evaluation of IVC and provide means to evaluate developed protocols more accurately.

Joint mobility and routing for lifetime elongation in wireless sensor networks

Abstract: Although many energy efficient/conserving routing protocols have been proposed for wireless sensor networks, the concentration of data traffic towards a small number of base stations remains a major threat to the network lifetime. The main reason is that the sensor nodes located near a base station have to relay data for a large part of the network and thus deplete their batteries very quickly. The solution we propose in this paper suggests that the base station be mobile; in this way, the nodes located close to it change over time. Data collection protocols can then be optimized by taking both base station mobility and multi-hop routing into account. We first study the former, and conclude that the best mobility strategy consists in following the periphery of the network (we assume that the sensors are deployed within a circle). We then consider jointly mobility and routing algorithms in this case, and show that a better routing strategy uses a combination of round routes and short paths. We provide a detailed analytical model for each of our statements, and corroborate it with simulation results. We show that the obtained improvement in terms of network lifetime is in the order of 500%.

Design and analysis of an MST-based topology control algorithm

Abstract: In this paper, we present a minimum spanning tree (MST) based topology control algorithm, called local minimum spanning tree (LMST), for wireless multi-hop networks. In this algorithm, each node builds its local minimum spanning tree independently and only keeps on-tree nodes that are one-hop away as its neighbors in the final topology. We analytically prove several important properties of LMST: (1) the topology derived under LMST preserves the network connectivity; (2) the node degree of any node in the resulting topology is bounded by 6; and (3) the topology can be transformed into one with bidirectional links (without impairing the network connectivity) after removal of all uni-directional links. These results are corroborated in the simulation study.