Ning Lu

Bio: Ning Lu is an academic researcher from Colorado School of Mines. The author has contributed to research in topics: Soil water & Pore water pressure. The author has an hindex of 55, co-authored 398 publications receiving 13614 citations. Previous affiliations of Ning Lu include Xidian University & Battelle Memorial Institute.

Unsaturated Soil Mechanics

Abstract: DESCRIPTION Unsaturated Soil Mechanics is the first book to provide a comprehensive introduction to the fundamental principles of unsaturated soil mechanics. * Offers extensive sample problems with an accompanying solutions manual. * Brings together the rapid advances in research in unsaturated soil mechanics in one focused volume. * Covers advances in effective stress and suction and hydraulic conductivity measurement.

Suction Stress Characteristic Curve for Unsaturated Soil

Abstract: The concept of the suction stress characteristic curve (SSCC) for unsaturated soil is presented. Particle-scale equilibrium analyses are employed to distinguish three types of interparticle forces: (1) active forces transmitted through the soil grains; (2) active forces at or near interparticle contacts; and (3) passive, or counterbalancing, forces at or near interparticle contacts. It is proposed that the second type of force, which includes physicochemical forces, cementation forces, surface tension forces, and the force arising from negative pore-water pressure, may be conceptually combined into a macroscopic stress called suction stress. Suction stress characteristically depends on degree of saturation, water content, or matric suction through the SSCC, thus paralleling well-established concepts of the soil–water characteristic curve and hydraulic conductivity function for unsaturated soils. The existence and behavior of the SSCC are experimentally validated by considering unsaturated shear strength data for a variety of soil types in the literature. Its characteristic nature and a methodology for its determination are demonstrated. The experimental evidence shows that both Mohr–Coulomb failure and critical state failure can be well represented by the SSCC concept. The SSCC provides a potentially simple and practical way to describe the state of stress in unsaturated soil.

An Evaluation of the HVAC Load Potential for Providing Load Balancing Service

Abstract: This paper investigates the potential of providing intra-hour load balancing services using aggregated heating, ventilating, and air-conditioning (HVAC) loads. A directload control algorithm is presented. A temperature-priority-list method is used to dispatch the HVAC loads optimally to maintain customer-desired indoor temperatures and load diversity. Realistic intra-hour load balancing signals are used to evaluate the operational characteristics of the HVAC load under different outdoor temperature profiles and different indoor temperature settings. The number of HVAC units needed is also investigated. Modeling results suggest that the number of HVAC units needed to provide a ±1-MW load balancing service 24 hours a day varies significantly with baseline settings, high and low temperature settings, and outdoor temperatures. The results demonstrate that the intra-hour load balancing service provided by HVAC loads meets the performance requirements and can become a major source of revenue for load-serving entities where the two-way communication smart grid infrastructure enables direct load control over the HVAC loads.

Smart-grid security issues

Abstract: This article has given a broadbrush description of issues related to smart-grid security. Designing solutions in at this stage, before widespread deployment, would be beneficial; in some cases solutions exist, whereas in others research investments will be needed. Several open questions about goals still require discussion, especially around such topics as how (and how much) privacy can be supported.

Appliance Commitment for Household Load Scheduling

Abstract: This paper presents a novel appliance commitment algorithm that schedules thermostatically controlled household loads based on price and consumption forecasts considering users' comfort settings to meet an optimization objective such as minimum payment or maximum comfort. The formulation of an appliance commitment problem is described using an electrical water heater load as an example. The thermal dynamics of heating and coasting of the water heater load is modeled by physical models; random hot water consumption is modeled with statistical methods. The models are used to predict the appliance operation over the scheduling time horizon. User comfort is transformed to a set of linear constraints. Then, a novel linear-sequential-optimization-enhanced, multiloop algorithm is used to solve the appliance commitment problem. The simulation results demonstrate that the algorithm is fast, robust, and flexible. The algorithm can be used in home/building energy-management systems to help household owners or building managers to automatically create optimal load operation schedules based on different cost and comfort settings and compare cost/benefits among schedules.

Electrochemical Energy Storage for Green Grid

Abstract: The is a comprehensive review on the needs and potential storage technologies for electrical grid that is expected to integrate significant levels of renewables. This review offers details of the technologies, in terms of needs, status, challenges and future R&d directions.

Handbook of Chemistry and Physics

Abstract: There is a special reason for reviewing this book at this time: it is the 50th edition of a compendium that is known and used frequently in most chemical and physical laboratories in many parts of the world. Surely, a publication that has been published for 56 years, withstanding the vagaries of science in this century, must have had something to offer. There is another reason: while the book is a standard fixture in most chemical and physical laboratories, including those in medical centers, it is not as frequently seen in the laboratories of physician's offices (those either in solo or group practice). I believe that the Handbook can be useful in those laboratories. One of the reasons, among others, is that the various basic items of information it offers may be helpful in new tests, either physical or chemical, which are continuously being published. The basic information may relate

Demand response and smart grids—A survey

Abstract: The smart grid is conceived of as an electric grid that can deliver electricity in a controlled, smart way from points of generation to active consumers. Demand response (DR), by promoting the interaction and responsiveness of the customers, may offer a broad range of potential benefits on system operation and expansion and on market efficiency. Moreover, by improving the reliability of the power system and, in the long term, lowering peak demand, DR reduces overall plant and capital cost investments and postpones the need for network upgrades. In this paper a survey of DR potentials and benefits in smart grids is presented. Innovative enabling technologies and systems, such as smart meters, energy controllers, communication systems, decisive to facilitate the coordination of efficiency and DR in a smart grid, are described and discussed with reference to real industrial case studies and research projects.

Injection-Induced Earthquakes

Abstract: Background Human-induced earthquakes have become an important topic of political and scientific discussion, owing to the concern that these events may be responsible for widespread damage and an overall increase in seismicity. It has long been known that impoundment of reservoirs, surface and underground mining, withdrawal of fluids and gas from the subsurface, and injection of fluids into underground formations are capable of inducing earthquakes. In particular, earthquakes caused by injection have become a focal point, as new drilling and well-completion technologies enable the extraction of oil and gas from previously unproductive formations. Earthquakes with magnitude (M) ≥ 3 in the U.S. midcontinent, 1967–2012. After decades of a steady earthquake rate (average of 21 events/year), activity increased starting in 2001 and peaked at 188 earthquakes in 2011. Human-induced earthquakes are suspected to be partially responsible for the increase. Advances Microearthquakes (that is, those with magnitudes below 2) are routinely produced as part of the hydraulic fracturing (or “fracking”) process used to stimulate the production of oil, but the process as currently practiced appears to pose a low risk of inducing destructive earthquakes. More than 100,000 wells have been subjected to fracking in recent years, and the largest induced earthquake was magnitude 3.6, which is too small to pose a serious risk. Yet, wastewater disposal by injection into deep wells poses a higher risk, because this practice can induce larger earthquakes. For example, several of the largest earthquakes in the U.S. midcontinent in 2011 and 2012 may have been triggered by nearby disposal wells. The largest of these was a magnitude 5.6 event in central Oklahoma that destroyed 14 homes and injured two people. The mechanism responsible for inducing these events appears to be the well-understood process of weakening a preexisting fault by elevating the fluid pressure. However, only a small fraction of the more than 30,000 wastewater disposal wells appears to be problematic—typically those that dispose of very large volumes of water and/or communicate pressure perturbations directly into basement faults. Outlook Injection-induced earthquakes, such as those that struck in 2011, clearly contribute to the seismic hazard. Quantifying their contribution presents difficult challenges that will require new research into the physics of induced earthquakes and the potential for inducing large-magnitude events. The petroleum industry needs clear requirements for operation, regulators must have a solid scientific basis for those requirements, and the public needs assurance that the regulations are sufficient and are being followed. The current regulatory frameworks for wastewater disposal wells were designed to protect potable water sources from contamination and do not address seismic safety. One consequence is that both the quantity and timeliness of information on injection volumes and pressures reported to regulatory agencies are far from ideal for managing earthquake risk from injection activities. In addition, seismic monitoring capabilities in many of the areas in which wastewater injection activities have increased are not capable of detecting small earthquake activity that may presage larger seismic events.

Introduction to the Finite Element Method

Abstract: This chapter introduces the finite element method (FEM) as a tool for solution of classical electromagnetic problems. Although we discuss the main points in the application of the finite element method to electromagnetic design, including formulation and implementation, those who seek deeper understanding of the finite element method should consult some of the works listed in the bibliography section.