Noah A. Rubin

Bio: Noah A. Rubin is an academic researcher from Harvard University. The author has contributed to research in topics: Polarization (waves) & Holography. The author has an hindex of 13, co-authored 30 publications receiving 1586 citations. Previous affiliations of Noah A. Rubin include Kansas State University.

Metasurface Polarization Optics: Independent Phase Control of Arbitrary Orthogonal States of Polarization.

Abstract: We present a method allowing for the imposition of two independent and arbitrary phase profiles on any pair of orthogonal states of polarization-linear, circular, or elliptical-relying only on simple, linearly birefringent wave plate elements arranged into metasurfaces. This stands in contrast to previous designs which could only address orthogonal linear, and to a limited extent, circular polarizations. Using this approach, we demonstrate chiral holograms characterized by fully independent far fields for each circular polarization and elliptical polarization beam splitters, both in the visible. This approach significantly expands the scope of metasurface polarization optics.

Arbitrary spin-to–orbital angular momentum conversion of light

Abstract: Optical elements that convert the spin angular momentum (SAM) of light into vortex beams have found applications in classical and quantum optics. These elements—SAM-to–orbital angular momentum (OAM) converters—are based on the geometric phase and only permit the conversion of left- and right-circular polarizations (spin states) into states with opposite OAM. We present a method for converting arbitrary SAM states into total angular momentum states characterized by a superposition of independent OAM. We designed a metasurface that converts left- and right-circular polarizations into states with independent values of OAM and designed another device that performs this operation for elliptically polarized states. These results illustrate a general material-mediated connection between SAM and OAM of light and may find applications in producing complex structured light and in optical communication.

Matrix Fourier optics enables a compact full-Stokes polarization camera

Abstract: Recent developments have enabled the practical realization of optical elements in which the polarization of light may vary spatially. We present an extension of Fourier optics-matrix Fourier optics-for understanding these devices and apply it to the design and realization of metasurface gratings implementing arbitrary, parallel polarization analysis. We show how these gratings enable a compact, full-Stokes polarization camera without standard polarization optics. Our single-shot polarization camera requires no moving parts, specially patterned pixels, or conventional polarization optics and may enable the widespread adoption of polarization imaging in machine vision, remote sensing, and other areas.

Metasurface optics for on-demand polarization transformations along the optical path

Abstract: Polarization plays a key role in science; hence its versatile manipulation is crucial. Existing polarization optics, however, can only manipulate polarization in a single transverse plane. Here we demonstrate a new class of polarizers and wave plates—based on metasurfaces—that can impart an arbitrarily chosen polarization response along the propagation direction, regardless of the incident polarization. The underlying mechanism relies on transforming an incident waveform into an ensemble of pencil-like beams with different polarization states that beat along the optical axis thereby changing the resulting polarization at will, locally, as light propagates. Remarkably, using form-birefringent metasurfaces in combination with matrix-based holography enables the desired propagation-dependent polarization response to be enacted without a priori knowledge of the incident polarization—a behaviour that would require three polarization-sensitive holograms if implemented otherwise. Our work expands the use of polarization in the design of multifunctional metasurfaces and may find application in tunable structured light, optically switchable devices and versatile light–matter interactions. Using a metasurface that allows shaping of the polarization state of a light beam independently at each point of space along its propagation direction, longitudinally variable polarization optical components are demonstrated, inspiring new directions in structured light, polarization-switchable devices and light–matter interaction.

Polarization state generation and measurement with a single metasurface.

Abstract: The constituent elements of metasurfaces may be designed with explicit polarization dependence, making metasurfaces a fascinating platform for new polarization optics. In this work we show that a metasurface grating can be designed to produce arbitrarily specified polarization states on a set of defined diffraction orders given that the polarization of the incident beam is known. We also demonstrate that, when used in a reverse configuration, the same grating may be used as a parallel snapshot polarimeter, requiring a minimum of bulk polarization optics. We demonstrate its use in measuring partially polarized light, and show that it performs favorably in comparison to a commercial polarimeter. This work is of consequence in any application requiring lightweight, compact, and low-cost polarization optics, polarimetry, or polarization imaging.

Principles Of Optics Electromagnetic Theory Of Propagation Interference And Diffraction Of Light

Abstract: Thank you for reading principles of optics electromagnetic theory of propagation interference and diffraction of light. As you may know, people have search hundreds times for their favorite novels like this principles of optics electromagnetic theory of propagation interference and diffraction of light, but end up in harmful downloads. Rather than enjoying a good book with a cup of coffee in the afternoon, instead they are facing with some infectious bugs inside their computer.

Optical vortices 30 years on: OAM manipulation from topological charge to multiple singularities

Abstract: Thirty years ago, Coullet et al. proposed that a special optical field exists in laser cavities bearing some analogy with the superfluid vortex. Since then, optical vortices have been widely studied, inspired by the hydrodynamics sharing similar mathematics. Akin to a fluid vortex with a central flow singularity, an optical vortex beam has a phase singularity with a certain topological charge, giving rise to a hollow intensity distribution. Such a beam with helical phase fronts and orbital angular momentum reveals a subtle connection between macroscopic physical optics and microscopic quantum optics. These amazing properties provide a new understanding of a wide range of optical and physical phenomena, including twisting photons, spin-orbital interactions, Bose-Einstein condensates, etc., while the associated technologies for manipulating optical vortices have become increasingly tunable and flexible. Hitherto, owing to these salient properties and optical manipulation technologies, tunable vortex beams have engendered tremendous advanced applications such as optical tweezers, high-order quantum entanglement, and nonlinear optics. This article reviews the recent progress in tunable vortex technologies along with their advanced applications.

Arbitrary spin-to–orbital angular momentum conversion of light

Abstract: Optical elements that convert the spin angular momentum (SAM) of light into vortex beams have found applications in classical and quantum optics. These elements—SAM-to–orbital angular momentum (OAM) converters—are based on the geometric phase and only permit the conversion of left- and right-circular polarizations (spin states) into states with opposite OAM. We present a method for converting arbitrary SAM states into total angular momentum states characterized by a superposition of independent OAM. We designed a metasurface that converts left- and right-circular polarizations into states with independent values of OAM and designed another device that performs this operation for elliptically polarized states. These results illustrate a general material-mediated connection between SAM and OAM of light and may find applications in producing complex structured light and in optical communication.

Metalenses: Versatile multifunctional photonic components

Abstract: BACKGROUND Future high-performance portable and wearable optical devices and systems with small footprints and low weights will require components with small form factors and enhanced functionality. Planar components based on diffractive optics (e.g., gratings, Fresnel lenses) and thin-film optics (e.g., dielectric filters, Bragg reflectors) have been around for decades; however, their limited functionality and difficulty of integration have been key incentives to search for better alternatives. Owing to its potential for vertical integration and marked design flexibility, metasurface-based flat optics provides a rare opportunity to overcome these challenges. The building blocks (BBs) of metasurfaces are subwavelength-spaced scatterers. By suitably adjusting their shape, size, position, and orientation with high spatial resolution, one can control the basic properties of light (phase, amplitude, polarization) and thus engineer its wavefront at will. This possibility greatly expands the frontiers of optical design by enabling multifunctional components with attendant reduction of thickness, size, and complexity. ADVANCES Recent progress in fabrication techniques and in the theory and design of metasurfaces holds promise for this new optical platform (metaoptics) to replace or complement conventional components in many applications. One major advance has been the migration to all-dielectric metasurfaces. Here, we discuss the key advantages of using dielectric phase-shifting elements with low optical loss and strong light confinement in the visible and near-infrared regions as BBs of flat lenses (metalenses). High–numerical aperture metalenses that are free of spherical aberrations have been implemented to achieve diffraction-limited focusing with subwavelength resolution, without requiring the complex shapes of aspherical lenses. Achromatic metalenses at discrete wavelengths and over a bandwidth have been realized by dispersion engineering of the phase shifters. By suitably adjusting the geometrical parameters of the latter, one can impart polarization- and wavelength-dependent phases to realize multifunctional metalenses with only one ultrathin layer. For example, polarization-sensitive flat lenses for chiral imaging and circular dichroism spectroscopy with high resolution have been realized, and off-axis metalenses with large engineered angular dispersion have been used to demonstrate miniature spectrometers. The fabrication of metalenses is straightforward and often requires one-step lithography, which can be based on high-throughput techniques such as deep-ultraviolet and nanoimprint lithography. OUTLOOK In the near future, the ability to fabricate metalenses and other metaoptical components with a planar process using the same lithographic tools for manufacturing integrated circuits (ICs) will have far-reaching implications. We envision that camera modules widely employed in cell phones, laptops, and myriad applications will become thinner and easier to optically align and package, with metalenses and the complementary metal-oxide semiconductor–compatible sensor manufactured by the same foundries. The unprecedented design freedom of metalenses and other metasurface optical components will greatly expand the range of applications of micro-optics and integrated optics. We foresee a rapidly increasing density of nanoscale optical elements on metasurface-based chips, with attendant marked increases in performance and number of functionalities. Such digital optics will probably follow a Moore-like law, similar to that governing the scaling of ICs, leading to a wide range of high-volume applications.

Functional Meta-Optics and Nanophotonics Govern by Mie Resonances

Abstract: Scattering of electromagnetic waves by subwavelength objects is accompanied by the excitation of electric and magnetic Mie resonances that may modify substantially the scattering intensity and radiation pattern. Scattered fields can be decomposed into electric and magnetic multipoles, and the magnetic multipoles define magnetic response of structured materials underpinning the new field of all-dielectric resonant meta-optics. Here we review the recent developments in meta-optics and nanophotonics and demonstrate that the Mie resonances can play a crucial role offering novel ways for the enhancement of many optical effects near magnetic and electric multipolar resonances, as well as driving a variety of interference phenomena which govern recently discovered novel effects in nanophotonics. We further discuss the frontiers of all-dielectric meta-optics for flexible and advanced control of light with full phase and amplitude engineering, including nonlinear nanophotonics, anapole nanolasers, quantum optics, ...