Nobuo Iyi

Bio: Nobuo Iyi is an academic researcher from National Institute for Materials Science. The author has contributed to research in topics: Layered double hydroxides & Hydroxide. The author has an hindex of 48, co-authored 175 publications receiving 9177 citations. Previous affiliations of Nobuo Iyi include Facultad de Ciencias Exactas y Naturales & University of Tokyo.

Synthesis, anion exchange, and delamination of Co-Al layered double hydroxide: assembly of the exfoliated nanosheet/polyanion composite films and magneto-optical studies.

Abstract: This paper describes a systematic study on the synthesis, anion exchange, and delamination of Co-Al layered double hydroxide (LDH), with the aim of achieving fabrication and clarifying the properties of LDH nanosheet/polyanion composite films. Co-Al-CO3 LDH hexagonal platelets of 4 mum in lateral size were synthesized by the urea method under optimized reaction conditions. The as-prepared CO3(2-)-LDH was converted to Cl- -LDH by treating with a NaCl-HCl mixed solution, retaining its high crystallinity and hexagonal platelike morphology. LDHs intercalated with a variety of anions (such as NO3-, ClO4-, acetate, lactate, dodecyl sulfate, and oleate) were further prepared from Cl- -LDH via an anion-exchange process employing corresponding salts. Exchanged products in various anion forms were found to show different delamination behaviors in formamide. Among them, best results were observed for NO3- -LDH in terms of the exfoliating degree and the quality of the exfoliated nanosheets. The delamination gave a pink transparent suspension containing well-defined nanosheets with lateral sizes of up to 2 microm. The resulting nanosheets were assembled layer-by-layer with an anionic polymer, poly(sodium styrene 4-sulfonate) (PSS), onto quartz glass substrates to produce composite films. Magnetic circular dichroism (MCD) measurements revealed that the assembled multilayer films exhibited an interesting magneto-optical response.

Positively Charged Nanosheets Derived via Total Delamination of Layered Double Hydroxides

Abstract: Positively charged nanosheets with a lateral dimension of micrometers have been synthesized by directly delaminating a well-crystallized Mg−Al layered double hydroxide (LDH) in the nitrate form. The action of formamide on LDH crystals 10 μm in size led to a transparent solution. X-ray diffraction measurement on a glue-like colloid centrifuged from the solution detected a broad feature at small angular range, while completely losing the sharp reflections for the precursor crystalline compound. The broad profile was very similar to the square of the structure factor calculated based on the LDH structure, which provides strong evidence for the total exfoliation of the LDH crystals into their single sheets. Upon in situ aging in a stream of nitrogen gas, the broad pattern was gradually converted into a sharp basal diffraction pattern, indicating the restacking of molecular LDH nanosheets to restore the original stacked form. Observations by transmission electron microscopy and atomic force microscopy revealed...

Exfoliating layered double hydroxides in formamide: a method to obtain positively charged nanosheets

Abstract: Exfoliation of layered double hydroxides (LDHs) into single layers provides a new type of nanosheet with ultimate two-dimensional anisotropy and positive charge. In this Highlight article, we briefly review the latest advances in this emerging field. In comparison with the previous studies, we show that micrometer-sized and well-defined LDH nanosheets can be readily attained by synthesizing large crystals of LDH-carbonate via so-called homogeneous precipitation and subsequent exfoliation of the nitrate form in formamide. Some general aspects including the exfoliating process and characterization, a plausible delaminating mechanism, and future challenges, are presented and discussed.

Synthesis and Exfoliation of Co2+−Fe3+ Layered Double Hydroxides: An Innovative Topochemical Approach

Abstract: This paper describes a topochemical synthetic approach to Co2+-Fe3+ layered double hydroxides (LDHs). Micrometer-sized hexagonal platelets of brucite-like Co2/3Fe1/3(OH)2 were first prepared by a homogeneous precipitation of an aqueous solution of divalent cobalt and ferrous ions through hexamethylenetetramine (HMT) hydrolysis under a nitrogen gas atmosphere. A subsequent oxidative intercalation process, by the action of iodine (I2) in chloroform (CHCl3), transformed the precursory brucite-like Co2+-Fe2+ hydroxides into hydrotalcite-like Co2+-Fe3+ LDHs, in which the oxidization of Fe2+ into Fe3+ induced positive charges to the octahedral hydroxyl layers while anions (I-) were intercalated into the interlayer space. Co2+-Fe3+ LDHs inherited the high crystallinity and hexagonal platelet morphology from their brucite-like precursor due to the topotactic nature of the transformation, which was verified by abundant microscopic and spectroscopic characterizations. After a normal ion-exchange process, Co2+-Fe3+ LDHs accommodating perchlorate anions were exfoliated into unilamellar nanosheets in formamide by an ultrasonic treatment.

Progress, Challenges, and Opportunities in Two-Dimensional Materials Beyond Graphene

Abstract: Graphene’s success has shown that it is possible to create stable, single and few-atom-thick layers of van der Waals materials, and also that these materials can exhibit fascinating and technologically useful properties. Here we review the state-of-the-art of 2D materials beyond graphene. Initially, we will outline the different chemical classes of 2D materials and discuss the various strategies to prepare single-layer, few-layer, and multilayer assembly materials in solution, on substrates, and on the wafer scale. Additionally, we present an experimental guide for identifying and characterizing single-layer-thick materials, as well as outlining emerging techniques that yield both local and global information. We describe the differences that occur in the electronic structure between the bulk and the single layer and discuss various methods of tuning their electronic properties by manipulating the surface. Finally, we highlight the properties and advantages of single-, few-, and many-layer 2D materials in...

Recent Advances in Ultrathin Two-Dimensional Nanomaterials

Abstract: Since the discovery of mechanically exfoliated graphene in 2004, research on ultrathin two-dimensional (2D) nanomaterials has grown exponentially in the fields of condensed matter physics, material science, chemistry, and nanotechnology. Highlighting their compelling physical, chemical, electronic, and optical properties, as well as their various potential applications, in this Review, we summarize the state-of-art progress on the ultrathin 2D nanomaterials with a particular emphasis on their recent advances. First, we introduce the unique advances on ultrathin 2D nanomaterials, followed by the description of their composition and crystal structures. The assortments of their synthetic methods are then summarized, including insights on their advantages and limitations, alongside some recommendations on suitable characterization techniques. We also discuss in detail the utilization of these ultrathin 2D nanomaterials for wide ranges of potential applications among the electronics/optoelectronics, electrocat...

Liquid Exfoliation of Layered Materials

Abstract: Background Since at least 400 C.E., when the Mayans first used layered clays to make dyes, people have been harnessing the properties of layered materials. This gradually developed into scientific research, leading to the elucidation of the laminar structure of layered materials, detailed understanding of their properties, and eventually experiments to exfoliate or delaminate them into individual, atomically thin nanosheets. This culminated in the discovery of graphene, resulting in a new explosion of interest in two-dimensional materials. Layered materials consist of two-dimensional platelets weakly stacked to form three-dimensional structures. The archetypal example is graphite, which consists of stacked graphene monolayers. However, there are many others: from MoS 2 and layered clays to more exotic examples such as MoO 3 , GaTe, and Bi 2 Se 3 . These materials display a wide range of electronic, optical, mechanical, and electrochemical properties. Over the past decade, a number of methods have been developed to exfoliate layered materials in order to produce monolayer nanosheets. Such exfoliation creates extremely high-aspect-ratio nanosheets with enormous surface area, which are ideal for applications that require surface activity. More importantly, however, the two-dimensional confinement of electrons upon exfoliation leads to unprecedented optical and electrical properties. Liquid exfoliation of layered crystals allows the production of suspensions of two-dimensional nanosheets, which can be formed into a range of structures. (A) MoS 2 powder. (B) WS 2 dispersed in surfactant solution. (C) An exfoliated MoS 2 nanosheet. (D) A hybrid material consisting of WS 2 nanosheets embedded in a network of carbon nanotubes. Advances An important advance has been the discovery that layered crystals can be exfoliated in liquids. There are a number of methods to do this that involve oxidation, ion intercalation/exchange, or surface passivation by solvents. However, all result in liquid dispersions containing large quantities of nanosheets. This brings considerable advantages: Liquid exfoliation allows the formation of thin films and composites, is potentially scaleable, and may facilitate processing by using standard technologies such as reel-to-reel manufacturing. Although much work has focused on liquid exfoliation of graphene, such processes have also been demonstrated for a host of other materials, including MoS 2 and related structures, layered oxides, and clays. The resultant liquid dispersions have been formed into films, hybrids, and composites for a range of applications. Outlook There is little doubt that the main advances are in the future. Multifunctional composites based on metal and polymer matrices will be developed that will result in enhanced mechanical, electrical, and barrier properties. Applications in energy generation and storage will abound, with layered materials appearing as electrodes or active elements in devices such as displays, solar cells, and batteries. Particularly important will be the use of MoS 2 for water splitting and metal oxides as hydrogen evolution catalysts. In addition, two-dimensional materials will find important roles in printed electronics as dielectrics, optoelectronic devices, and transistors. To achieve this, much needs to be done. Production rates need to be increased dramatically, the degree of exfoliation improved, and methods to control nanosheet properties developed. The range of layered materials that can be exfoliated must be expanded, even as methods for chemical modification must be developed. Success in these areas will lead to a family of materials that will dominate nanomaterials science in the 21st century.

Hollow Micro-/Nanostructures: Synthesis and Applications**

Abstract: Hollow micro-/nanostructures are of great interest in many current and emerging areas of technology. Perhaps the best-known example of the former is the use of fly-ash hollow particles generated from coal power plants as partial replacement for Portland cement, to produce concrete with enhanced strength and durability. This review is devoted to the progress made in the last decade in synthesis and applications of hollow micro-/nanostructures. We present a comprehensive overview of synthetic strategies for hollow structures. These strategies are broadly categorized into four themes, which include well-established approaches, such as conventional hard-templating and soft-templating methods, as well as newly emerging methods based on sacrificial templating and template-free synthesis. Success in each has inspired multiple variations that continue to drive the rapid evolution of the field. The Review therefore focuses on the fundamentals of each process, pointing out advantages and disadvantages where appropriate. Strategies for generating more complex hollow structures, such as rattle-type and nonspherical hollow structures, are also discussed. Applications of hollow structures in lithium batteries, catalysis and sensing, and biomedical applications are reviewed.

Recent advances in the synthesis and application of layered double hydroxide (LDH) nanosheets.

Abstract: Layered double hydroxides (LDHs) are a class of ionic lamellar compounds made up of positively charged brucite-like layers with an interlayer region containing charge compensating anions and solvation molecules. Delamination of LDHs is an interesting route for producing positively charged thin platelets with a thickness of a few atomic layers, which can be used as nanocomposites for polymers or as building units for making new designed organic-inorganic or inorganic-inorganic nanomaterials. The synthesis of nanosized LDH platelets can be generally classified into two approaches, bottom-up and top-down. It requires modification of the LDH interlamellar environment and then selection of an appropriate solvent system. In DDS intercalated LDHs, the aliphatic tails of the DDS- anions exhibit a high degree of interdigitation in order to maximize guest-guest dispersive interactions. Bellezza reported that the LDH colloids can also been obtained by employing a reverse microemulsion approach.