scispace - formally typeset
Search or ask a question
Author

Norihan Md Arifin

Bio: Norihan Md Arifin is an academic researcher from Universiti Putra Malaysia. The author has contributed to research in topics: Boundary layer & Nanofluid. The author has an hindex of 25, co-authored 258 publications receiving 2610 citations.


Papers
More filters
Journal Article
TL;DR: In this article, the steady two-dimensional stagnation point flow of an incompressible viscous and electrically conducting fluid, subject to a transverse uniform magnetic field, towards a stretching sheet is investigated.
Abstract: The steady two-dimensional stagnation point flow of an incompressible viscous and electrically conducting fluid, subject to a transverse uniform magnetic field, towards a stretching sheet is investigated. The governing system of partial differential equations are transformed to ordinary differential equations, which are then solved numerically using a finite difference scheme known as the Keller-box method. The effects of the governing parameters on the flow field and heat transfer characteristics are obtained and discussed. It is found that the heat transfer rate at the surface increases with the magnetic parameter when the free stream velocity exceeds the stretching velocity, i.e. e>1, and the opposite is observed when e<1.

183 citations

Journal ArticleDOI
TL;DR: In this paper, the authors investigated the flow characteristics and heat transfer of a hybrid Cu-Al2O3/water nanofluid due to a radially stretching/shrinking surface with the mutual effects of MHD, suction and Joule heating.

123 citations

Journal ArticleDOI
TL;DR: In this paper, the effect of an induced magnetic field on the skin friction coefficient, the local Nusselt number, the velocity, and the temperature profiles are presented graphically and discussed in detail.
Abstract: The problem of the steady magnetohydrodynamic (MHD) stagnation-point flow of an incompressible viscous fluid over a stretching sheet is studied. The effect of an induced magnetic field is taken into account. The nonlinear partial differential equations are transformed into ordinary differential equations via the similarity transformation. The transformed boundary layer equations are solved numerically using the shooting method. Numerical results are obtained for various magnetic parameters and Prandtl numbers. The effects of the induced magnetic field on the skin friction coefficient, the local Nusselt number, the velocity, and the temperature profiles are presented graphically and discussed in detail.

105 citations

Journal ArticleDOI
TL;DR: In this paper, the duality of solutions and the flow and heat transfer of the hybrid nanofluid past a shrinking cylinder in the appearance of Joule heating were observed.
Abstract: The objectives of the present study are (i) to observe the duality of solutions, and (ii) to investigate the flow and heat transfer of the hybrid nanofluid past a shrinking cylinder in the appearance of Joule heating. The single phase nanofluid model with modified thermophysical properties are used for the mathematical model. The similarity transformation simplifies the model (PDEs) into similarity (ordinary) differential equations. bvp4c solver is used to compute the reduced equations. For the validation part, the analytical solution is developed using an exact analytical method and compared with the numerical values for several cases. First and second solutions are observable for the shrinking cylinder case only if suction parameter is applied. Meanwhile, only the first solution is found to be stable from the stability analysis. The application of high suction strength make the reduced heat transfer rate is lower for hybrid nanofluid (Cu-Al2O3/water) than alumina-water nanofluid but, opposite result is found for the skin friction coefficient. The addition of curvature parameter (flat plate to cylinder) can quicken the separation process of boundary layer. This results are conclusive to the pair of alumina and copper only.

88 citations

01 Apr 2011
TL;DR: In this article, the effect of an induced magnetic field on the skin friction coefficient, the local Nusselt number, the velocity, and the temperature profiles are presented graphically and discussed in detail.
Abstract: The problem of the steady magnetohydrodynamic (MHD) stagnation-point flow of an incompressible viscous fluid over a stretching sheet is studied. The effect of an induced magnetic field is taken into account. The nonlinear partial differential equations are transformed into ordinary differential equations via the similarity transformation. The transformed boundary layer equations are solved numerically using the shooting method. Numerical results are obtained for various magnetic parameters and Prandtl numbers. The effects of the induced magnetic field on the skin friction coefficient, the local Nusselt number, the velocity, and the temperature profiles are presented graphically and discussed in detail.

85 citations


Cited by
More filters
Journal ArticleDOI

[...]

08 Dec 2001-BMJ
TL;DR: There is, I think, something ethereal about i —the square root of minus one, which seems an odd beast at that time—an intruder hovering on the edge of reality.
Abstract: There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality. Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

33,785 citations

Journal Article
TL;DR: The International Nanofluid Property Benchmark Exercise (INPBE) as discussed by the authors was held in 1998, where the thermal conductivity of identical samples of colloidally stable dispersions of nanoparticles or "nanofluids" was measured by over 30 organizations worldwide, using a variety of experimental approaches, including the transient hot wire method, steady state methods, and optical methods.
Abstract: This article reports on the International Nanofluid Property Benchmark Exercise, or INPBE, in which the thermal conductivity of identical samples of colloidally stable dispersions of nanoparticles or “nanofluids,” was measured by over 30 organizations worldwide, using a variety of experimental approaches, including the transient hot wire method, steady-state methods, and optical methods. The nanofluids tested in the exercise were comprised of aqueous and nonaqueous basefluids, metal and metal oxide particles, near-spherical and elongated particles, at low and high particle concentrations. The data analysis reveals that the data from most organizations lie within a relatively narrow band (±10% or less) about the sample average with only few outliers. The thermal conductivity of the nanofluids was found to increase with particle concentration and aspect ratio, as expected from classical theory. There are (small) systematic differences in the absolute values of the nanofluid thermal conductivity among the various experimental approaches; however, such differences tend to disappear when the data are normalized to the measured thermal conductivity of the basefluid. The effective medium theory developed for dispersed particles by Maxwell in 1881 and recently generalized by Nan et al. [J. Appl. Phys. 81, 6692 (1997)], was found to be in good agreement with the experimental data, suggesting that no anomalous enhancement of thermal conductivity was achieved in the nanofluids tested in this exercise.

881 citations

Journal ArticleDOI
TL;DR: In this paper, a comprehensive review is conducted on the simultaneous application of nanofluids and porous media for heat transfer enhancement purposes in thermal systems with different structures, flow regimes, and boundary conditions.

333 citations