Noritaka Mizuno

Bio: Noritaka Mizuno is an academic researcher from University of Tokyo. The author has contributed to research in topics: Catalysis & Heterogeneous catalysis. The author has an hindex of 78, co-authored 566 publications receiving 21719 citations. Previous affiliations of Noritaka Mizuno include University of Maryland, College Park & Hokkaido University.

Catalytic Chemistry of Heteropoly Compounds

Abstract: Publisher Summary This chapter describes the essence of the catalytic chemistry of heteropoly compounds in solution and in the solid state. The catalytic properties of heteropoly compounds have drawn wide attention, owing to the versatility of these compounds as catalysts, which has been demonstrated both by successhl large-scale applications and by promising laboratory results. Heteropolyanions are polymeric oxoanions formed by condensation of more than two different mononuclear oxoanions. Heteropolyanions formed from one kind of polyanion are called isopolyanions. Acidic elements such as Mo, W, V, Nb and Ta, which are present as oxoanions in aqueous solution, tend to polymerize by dehydration at low pH, forming polyanions and water.Heteropoly catalysts can be applied in various ways. They are used as acid as well as oxidation catalysts. They are used in various phases, as homogeneous liquids, in two-phase liquids (in phase-transfer catalysis), and in liquid-solid and in gas-solid combinations, etc.

Efficient Epoxidation of Olefins with ≥99% Selectivity and Use of Hydrogen Peroxide

Abstract: Epoxides are an important class of industrial chemicals that have been used as chemical intermediates. Catalytic epoxidation of olefins affords an interesting production technology. We found a widely usable green route to the production of epoxides: A silicotungstate compound, [gamma-SiW10O34(H2O)2]4-, is synthesized by protonation of a divacant, lacunary, Keggin-type polyoxometalate of [gamma-SiW10O36]8- and exhibits high catalytic performance for the epoxidation of various olefins, including propylene, with a hydrogen peroxide (H2O2) oxidant at 305 kelvin. The effectiveness of this catalyst is evidenced by >/=99% selectivity to epoxide, >/=99% efficiency of H2O2 utilization, high stereospecificity, and easy recovery of the catalyst from the homogeneous reaction mixture.

Removal of nitrogen monoxide through a novel catalytic process. 1. Decomposition on excessively copper-ion-exchanged ZSM-5 zeolites

Abstract: Repeated ion exchange of the ZSM-5 zeolite using aqueous copper(II) acetate solution was found to bring about excess loading of copper ions above an exchange level of 100%. The high activity of the resulting catalyst for NO decomposition was consistent for at least 30 h even at short contact time and low NO pressure. The number of copper ions that can adsorb NO molecules has been determined by a temperature-programmed desorption technique combined with IR measurement; 94% of Cu{sup 2+} ions in ZSM-5 were active for the adsorption. The activity of excessively copper ion exchanged ZSM-5 zeolite was slightly reduced by the oxygen in the feed gas while that of zeolite, of which the loading amount of copper was less than 100%, was greatly diminished under the same condition. SO{sub 2} completely poisons the activity at 673-923 K, but the activity can be regenerated at the higher temperature treatment.

Selective gas adsorption and separation in metal–organic frameworks

Abstract: Adsorptive separation is very important in industry. Generally, the process uses porous solid materials such as zeolites, activated carbons, or silica gels as adsorbents. With an ever increasing need for a more efficient, energy-saving, and environmentally benign procedure for gas separation, adsorbents with tailored structures and tunable surface properties must be found. Metal–organic frameworks (MOFs), constructed by metal-containing nodes connected by organic bridges, are such a new type of porous materials. They are promising candidates as adsorbents for gas separations due to their large surface areas, adjustable pore sizes and controllable properties, as well as acceptable thermal stability. This critical review starts with a brief introduction to gas separation and purification based on selective adsorption, followed by a review of gas selective adsorption in rigid and flexible MOFs. Based on possible mechanisms, selective adsorptions observed in MOFs are classified, and primary relationships between adsorption properties and framework features are analyzed. As a specific example of tailor-made MOFs, mesh-adjustable molecular sieves are emphasized and the underlying working mechanism elucidated. In addition to the experimental aspect, theoretical investigations from adsorption equilibrium to diffusion dynamics via molecular simulations are also briefly reviewed. Furthermore, gas separations in MOFs, including the molecular sieving effect, kinetic separation, the quantum sieving effect for H2/D2 separation, and MOF-based membranes are also summarized (227 references).

Aryl-aryl bond formation by transition-metal-catalyzed direct arylation.

Abstract: The biaryl structural motif is a predominant feature in many pharmaceutically relevant and biologically active compounds. As a result, for over a century 1 organic chemists have sought to develop new and more efficient aryl -aryl bond-forming methods. Although there exist a variety of routes for the construction of aryl -aryl bonds, arguably the most common method is through the use of transition-metalmediated reactions. 2-4 While earlier reports focused on the use of stoichiometric quantities of a transition metal to carry out the desired transformation, modern methods of transitionmetal-catalyzed aryl -aryl coupling have focused on the development of high-yielding reactions achieved with excellent selectivity and high functional group tolerance under mild reaction conditions. Typically, these reactions involve either the coupling of an aryl halide or pseudohalide with an organometallic reagent (Scheme 1), or the homocoupling of two aryl halides or two organometallic reagents. Although a number of improvements have developed the former process into an industrially very useful and attractive method for the construction of aryl -aryl bonds, the need still exists for more efficient routes whereby the same outcome is accomplished, but with reduced waste and in fewer steps. In particular, the obligation to use coupling partners that are both activated is wasteful since it necessitates the installation and then subsequent disposal of stoichiometric activating agents. Furthermore, preparation of preactivated aryl substrates often requires several steps, which in itself can be a time-consuming and economically inefficient process.

Engineering Metal Organic Frameworks for Heterogeneous Catalysis

Abstract: 2.2. MOFs with Metal Active Sites 4614 2.2.1. Early Studies 4614 2.2.2. Hydrogenation Reactions 4618 2.2.3. Oxidation of Organic Substrates 4620 2.2.4. CO Oxidation to CO2 4626 2.2.5. Phototocatalysis by MOFs 4627 2.2.6. Carbonyl Cyanosilylation 4630 2.2.7. Hydrodesulfurization 4631 2.2.8. Other Reactions 4632 2.3. MOFs with Reactive Functional Groups 4634 2.4. MOFs as Host Matrices or Nanometric Reaction Cavities 4636

Kirk-Othmer Encyclopedia of Chemical Technology数据库介绍及实例

Abstract: 介绍了Kirk—Othmer Encyclopedia of Chemical Technology（化工技术百科全书）（第五版）电子图书网络版数据库，并对该数据库使用方法和检索途径作出了说明，且结合实例简单地介绍了该数据库的检索方法。