Nuno Souto

Bio: Nuno Souto is an academic researcher from ISCTE – University Institute of Lisbon. The author has contributed to research in topics: MIMO & Orthogonal frequency-division multiplexing. The author has an hindex of 15, co-authored 140 publications receiving 925 citations. Previous affiliations of Nuno Souto include Instituto Superior Técnico & INESC-ID.

Multi-Resolution Broadcast/Multicast Systems for MBMS

Abstract: Multimedia Broadcast/Multicast Service (MBMS) supports downlink streaming and download-and-play type services to large groups of users. From the radio perspective, MBMS includes point-to-point (PtP) and point-to-multipoint (PtM) modes. This paper investigates and presents different multi-resolution broadcast systems for Wideband Code Division Multiple Access (WCDMA) cellular mobile networks, namely, multi-code, hierarchical QAM constellations and multi-antenna (MIMO) systems. Each one present performance gains over conventional single-resolution broadcast systems. A comparison is made between the three proposed multi-resolution systems. The use of High Speed Downlink Packet Access (HSDPA) to multicast video streaming as a multi-resolution system, associated or not to MIMO, can be employed by the MBMS PtP mode, but dependently on the deployment scenarios it can yield substantial reduction in resource demand and optimization of the allocated radio resources

Usage of link-level performance indicators for HSDPA network-level simulations in E-UMTS

Abstract: The paper describes integration of HSDPA (high-speed downlink packet access) link-level simulation results into network-level simulations for enhanced UMTS. The link-level simulations model all physical layer features depicted in the 3GPP standards. These include: generation of transport blocks; turbo coding; rate matching; spreading; scrambling; modulation. At the receiver side, all complementary blocks are designed, with soft-decision demodulation, and a turbo decoder using the MAP (maximum a posteriori) algorithm with 8 iterations. An analytical formula is defined that fits the CQI (channel quality indicator) dependent BLER (block error rate) versus E/sub b//N/sub 0/ results in an AWGN channel. This formula models the physical layer in the network-level simulator. A further extension for frequency selective fading channels has been defined. The network-level simulator includes propagation models that provide SNR values. Based on these SNR values and the simplified physical layer model, an algorithm selects the CQI, and determines the actual BLER at time of reception. The rounding down and delaying of the CQI reporting, which corresponds to the W-CDMA standard, has a significant impact on throughput and transfer delay of the HS-DSCH. Some compensation can be found in a modified transmission. The integration of the link-level and network-level simulators gives accurate and realistic results that can be used in more studies that focus on network layer aspects of packet based services over HSDPA.

Iterative Frequency-Domain Equalization for general constellations

Abstract: IB-DFE (Iterative Block DFE) is a promising turbo equalization technique for SC-FDE schemes (Single-Carrier with Frequency Domain Equalization). However, typical IB-DFE implementations are tailored for a specific constellation (usually QPSK). In this paper we propose a general method for designing IB-DFE receivers for any constellation. Our approach relies on an analytical characterization of the mapping rule were the constellation symbols are written as a linear function of the transmitted bits. This method is then employed in both uniform and non-uniform QAM constellations.

Cellular for the skies: exploiting mobile network infrastructure for low altitude air-to-ground communications

Abstract: In this article we presented an overview of UASs for civil applications focusing on the communication component. We identified several available communication technologies for UAVs, their constraints, and also protocols available for implementing the remote operation of the vehicles. As an attractive solution for the A2G communication link for UAVs, we discussed the potential of mobile networks with their fully deployed infrastructures, wide radio coverage, high throughputs, reduced latencies, and large availability of radio modems. We described how a UAS can be implemented in a flexible and modular approach that allows it to rely on one or several wireless (UAVs and GCSs) and wired (GCSs) technologies. Despite the advantages of a system based on cellular and IP networks, there are problems that must be dealt with, namely, possible loss of radio coverage, presence of NAT, delay, jitter, and packet loss. Following the proposed architecture, we implemented an UAS and conducted some flight tests, which showed that the operation of the vehicles in semi-automatic or fully-automatic modes is feasible. It is expected that future enhancements for 4G networks and evolution to 5G will benefit UAV communications even further with lower latencies, higher throughput, and higher reliability.

Accessing From the Sky: A Tutorial on UAV Communications for 5G and Beyond

Abstract: Unmanned aerial vehicles (UAVs) have found numerous applications and are expected to bring fertile business opportunities in the next decade. Among various enabling technologies for UAVs, wireless communication is essential and has drawn significantly growing attention in recent years. Compared to the conventional terrestrial communications, UAVs’ communications face new challenges due to their high altitude above the ground and great flexibility of movement in the 3-D space. Several critical issues arise, including the line-of-sight (LoS) dominant UAV-ground channels and induced strong aerial-terrestrial network interference, the distinct communication quality-of-service (QoS) requirements for UAV control messages versus payload data, the stringent constraints imposed by the size, weight, and power (SWAP) limitations of UAVs, as well as the exploitation of the new design degree of freedom (DoF) brought by the highly controllable 3-D UAV mobility. In this article, we give a tutorial overview of the recent advances in UAV communications to address the above issues, with an emphasis on how to integrate UAVs into the forthcoming fifth-generation (5G) and future cellular networks. In particular, we partition our discussion into two promising research and application frameworks of UAV communications, namely UAV-assisted wireless communications and cellular-connected UAVs, where UAVs are integrated into the network as new aerial communication platforms and users, respectively. Furthermore, we point out promising directions for future research.

A Survey of Channel Modeling for UAV Communications

Abstract: Unmanned aerial vehicles (UAVs) have attracted great interest in rapid deployment for both civil and military applications. UAV communication has its own distinctive channel characteristics compared to the widely used cellular or satellite systems. Accurate channel characterization is crucial for the performance optimization and design of efficient UAV communication. However, several challenges exist in UAV channel modeling. For example, the propagation characteristics of UAV channels are under explored for spatial and temporal variations in non–stationary channels. Additionally, airframe shadowing has not yet been investigated for small size rotary UAVs. This paper provides an extensive survey of the measurement methods proposed for UAV channel modeling that use low altitude platforms and discusses various channel characterization efforts. We also review from a contemporary perspective of UAV channel modeling approaches, and outline future research challenges in this domain.

A Survey of Air-to-Ground Propagation Channel Modeling for Unmanned Aerial Vehicles

Abstract: In recent years, there has been a dramatic increase in the use of unmanned aerial vehicles (UAVs), particularly for small UAVs, due to their affordable prices, wide availability, and relative ease of operability. Existing and future applications of UAVs include remote surveillance and monitoring, relief operations, package delivery, and communication backhaul infrastructure. Additionally, UAVs are envisioned as an important component of 5G wireless technology and beyond. The unique application scenarios for UAVs necessitate accurate air-to-ground (AG) propagation channel models for designing and evaluating UAV communication links for control/non-payload as well as payload data transmissions. These AG propagation models have not been investigated in detail, relative to terrestrial propagation models. In this paper, a comprehensive survey is provided on available AG channel measurement campaigns, large and small scale fading channel models, their limitations, and future research directions for UAV communication scenarios.

Mobile Video Transmission Using Scalable Video Coding

Abstract: The scalable video coding (SVC) standard as an extension of H.264/AVC allows efficient, standard-based temporal, spatial, and quality scalability of video bit streams. Scalability of a video bit stream allows for media bit rate as well as for device capability adaptation. Moreover, adaptation of the bit rate of a video signal is a desirable key feature, if limitation in network resources, mostly characterized by throughput variations, varying delay or transmission errors, need to be considered. Typically, in mobile networks the throughput, delay and errors of a connection (link) depend on the current reception conditions, which are largely influenced by a number of physical factors. In order to cope with the typically varying characteristics of mobile communication channels in unicast, multicast, or broadcast services, different methods for increasing robustness and achieving quality of service are desirable. We will give an overview of SVC and its relation to mobile delivery methods. Furthermore, innovative use cases are introduced which apply SVC in mobile networks.

Accessing From The Sky: A Tutorial on UAV Communications for 5G and Beyond

Abstract: Unmanned aerial vehicles (UAVs) have found numerous applications and are expected to bring fertile business opportunities in the next decade. Among various enabling technologies for UAVs, wireless communication is essential and has drawn significantly growing attention in recent years. Compared to the conventional terrestrial communications, UAVs' communications face new challenges due to their high altitude above the ground and great flexibility of movement in the three-dimensional (3D) space. Several critical issues arise, including the line-of-sight (LoS) dominant UAV-ground channels and resultant strong aerial-terrestrial network interference, the distinct communication quality of service (QoS) requirements for UAV control messages versus payload data, the stringent constraints imposed by the size, weight and power (SWAP) limitations of UAVs, as well as the exploitation of the new design degree of freedom (DoF) brought by the highly controllable 3D UAV mobility. In this paper, we give a tutorial overview of the recent advances in UAV communications to address the above issues, with an emphasis on how to integrate UAVs into the forthcoming fifth-generation (5G) and future cellular networks. In particular, we partition our discussions into two promising research and application frameworks of UAV communications, namely UAV-assisted wireless communications and cellular-connected UAVs,where UAVs serve as aerial communication platforms and users, respectively. Furthermore, we point out promising directions for future research and investigation.