O. Groening

Bio: O. Groening is an academic researcher. The author has contributed to research in topics: Field electron emission & Anode. The author has an hindex of 7, co-authored 8 publications receiving 1365 citations.

Scanning field emission from patterned carbon nanotube films

Abstract: The investigation of the field emission (FE) properties of carbon nanotube (CNT) films by a scanning anode FE apparatus, reveals a strong dependence on the density and morphology of the CNT deposit. Large differences between the microscopic and macroscopic current and emission site densities are observed, and explained in terms of a variation of the field enhancement factor β. As a consequence, the emitted current density can be optimized by tuning the density of CNTs. Films with medium densities (on the order of 107 emitters/cm2, according to electrostatic calculations) show the highest emitted current densities.

Electron field emission from phase pure nanotube films grown in a methane/hydrogen plasma

Abstract: Phase pure nanotube films were grown on silicon substrates by a microwave plasma under conditions which normally are used for the growth of chemical vapor deposited diamond films. However, instead of using any pretreatment leading to diamond nucleation we deposited metal clusters on the silicon substrate. The resulting films contain only nanotubes and also onion-like structures. However, no other carbon allotropes like graphite or amorphous clustered material could be found. The nanotubes adhere very well to the substrates and do not need any further purification step. Electron field emission was observed at fields above 1.5 V/μm and we observed an emission site density up to 104/cm2 at 3 V/μm. Alternatively, we have grown nanotube films by the hot filament technique, which allows to uniformly cover a two inch wafer.

Characterization of thin film electron emitters by scanning anode field emission microscopy

Abstract: Scanning anode field emission microscopy is used to map the electron emission current I(x,y) under constant anode voltage and the electron extraction voltage V(x,y) under constant emission current as a function of tip position on carbon based thin film emitters. The spatially resolved field enhancement factor β(x,y) is derived from V(x,y) maps. It is shown that large variations in the emission site density (ESD) and current density can be explained in terms of the spatial variation of the field enhancement β(x,y). Comparison of β(x,y) and I(x,y) shows that electron emission currents are correlated to the presence of high aspect ratio field enhancing structures. We introduce the concept of field enhancement distribution f(β), which is derived from β(x,y) maps to characterize the field emission properties of thin films. In this context f(β)dβ gives the number of emitters on a unit surface with field enhancement factors in the interval (β,β+dβ). It is shown experimentally for the carbon thin film emitters investigated that f(β) has an exponential dependence with regard to the field enhancement factor β. The field enhancement distribution function f(β) can be said to give a complete characterization of the thin film field emission properties. As a consequence, the emitted current density and ESD can be optimized by tuning f(β) of the emitting thin film.

Collective emission degradation behavior of carbon nanotube thin-film electron emitters

Abstract: The current-induced emission degradation of a carbon nanotube (CNT) thin-film electron emitter is studied under constant emission current for different current levels, using a scanning anode field emission microscope. A permanent emission degradation is observed for emission currents higher than 300 nA per CNT and is associated with resistive heating at the CNT–substrate interface for the sample under investigation. A second field-induced emission degradation mechanism, associated with the removal of CNTs from the substrate, is also reported.

Microscopic characterization of electron field emission

Abstract: We report on the functional capabilities of a scanning anode field emission microscope (SAFEM) which combined with a phosphor screen is used to investigate and correlate individual electron emission site characteristics of low threshold thin film electron emitters in the micrometer regime. Spatially recorded extraction voltage V(x,y) maps under constant emission current or emission current I(x,y) maps under constant anode voltage reveal spatially divergent emission properties on thin film emitters. The V(x,y) maps are used to derive the field enhancement β(x,y) maps which give a better description of the thin film emission properties as compared to electric threshold fields which depends on anode-cathode geometry. Individual emission site current stability of thin film emitters can be investigated with the SAFEM, and a high-resolution field emission microscope to investigate the environmental stability of single carbon nanotubes mounted on filaments as a function of partial gas pressures and temperature.

Diamond-like amorphous carbon

Abstract: Diamond-like carbon (DLC) is a metastable form of amorphous carbon with significant sp3 bonding. DLC is a semiconductor with a high mechanical hardness, chemical inertness, and optical transparency. This review will describe the deposition methods, deposition mechanisms, characterisation methods, electronic structure, gap states, defects, doping, luminescence, field emission, mechanical properties and some applications of DLCs. The films have widespread applications as protective coatings in areas, such as magnetic storage disks, optical windows and micro-electromechanical devices (MEMs).

Electronic and transport properties of nanotubes

Abstract: This article reviews the electronic and transport properties of carbon nanotubes. The focus is mainly theoretical, but when appropriate the relation with experimental results is mentioned. While simple band-folding arguments will be invoked to rationalize how the metallic or semiconducting character of nanotubes is inferred from their topological structure, more sophisticated tight-binding and ab initio treatments will be introduced to discuss more subtle physical effects, such as those induced by curvature, tube-tube interactions, or topological defects. The same approach will be followed for transport properties. The fundamental aspects of conduction regimes and transport length scales will be presented using simple models of disorder, with the derivation of a few analytic results concerning specific situations of shortand long-range static perturbations. Further, the latest developments in semiempirical or ab initio simulations aimed at exploring the effect of realistic static scatterers chemical impurities, adsorbed molecules, etc. or inelastic electron-phonon interactions will be emphasized. Finally, specific issues, going beyond the noninteracting electron model, will be addressed, including excitonic effects in optical experiments, the Coulomb-blockade regime, and the Luttinger liquid, charge density waves, or superconducting transition.

Percolation in transparent and conducting carbon nanotube networks

Abstract: Ultrathin, uniform single-walled carbon nanotube networks of varying densities have been fabricated at room temperature by a vacuum filtration method. Measurements of the sheet conductance as a function of nanotube network density show 2D percolation behavior. In addition, the network transparency in the visible spectral range was examined and the results are in agreement with a standard thin-film model: fits to the standard theory indicate U ac ) Udc for transmission measurements at 550 nm. Transmission measurements also indicate the usefulness of nanotube network films as a transparent, conductive coating. Avenues for improvement of the network conductance are discussed.

Applications of Carbon Nanotubes

Abstract: Carbon nanotubes have attracted the fancy of many scientists worldwide. The small dimensions, strength and the remarkable physical properties of these structures make them a very unique material with a whole range of promising applications. In this review we describe some of the important materials science applications of carbon nanotubes. Specifically we discuss the electronic and electrochemical applications of nanotubes, nanotubes as mechanical reinforcements in high performance composites, nanotube-based field emitters, and their use as nanoprobes in metrology and biological and chemical investigations, and as templates for the creation of other nanostructures. Electronic properties and device applications of nanotubes are treated elsewhere in the book. The challenges that ensue in realizing some of these applications are also discussed from the point of view of manufacturing, processing, and cost considerations.