scispace - formally typeset
Search or ask a question
Author

O. Papes

Bio: O. Papes is an academic researcher from ETH Zurich. The author has contributed to research in topics: Constitutive equation & SCSI. The author has an hindex of 4, co-authored 4 publications receiving 83 citations.

Papers
More filters
Journal ArticleDOI
TL;DR: This paper reports on the initial stages of a project to simulate the nonlinear mechanical behavior of an aging human face and captures the observed loss of stiffness of these aging elastic components due to the history of straining as well as other physiological and environmental influences.
Abstract: This paper reports on the initial stages of a project to simulate the nonlinear mechanical behavior of an aging human face. A cross-section of the facial structure is considered to consist of a multilayered composite of tissues with differing mechanical behavior. The constitutive properties of these tissues are incorporated into a finite element model of the three-dimensional facial geometry. Relatively short time (elastic-viscoplastic) behavior is governed by equations previously developed which are consistent with mechanical tests. The long time response is controlled by the aging elastic components of the tissues. An aging function is introduced which, in a simplified manner, captures the observed loss of stiffness of these aging elastic components due to the history of straining as well as other physiological and environmental influences. Calculations have been performed for 30 years of exposure to gravitational forces. Progressive gravimetric soft tissue descent is simulated, which is regarded as the main indication of facial aging. Results are presented for the deformations and stress distributions in the layers of the soft tissues.

43 citations

Journal ArticleDOI
TL;DR: Overall, the feasibility of using constitutive relations which reflect the highly nonlinear elastic-viscoplastic behavior of facial soft tissues in finite element based three-dimensional mechanical analyses of the human face is demonstrated.
Abstract: A three-dimensional finite element program is described which attempts to simulate the nonlinear mechanical behavior of an aging human face with specific reference to progressive gravimetric soft tissue descent. A cross section of the facial structure is considered to consist of a multilayered composite of tissues with differing mechanical behavior. Relatively short time (elastic-viscoplastic) behavior is governed by equations previously developed which are consistent with mechanical tests. The long time response is controlled by the aging elastic components of the tissues. An aging function is introduced which, in a simplified manner, models the observed loss of stiffness of these aging elastic components due to the history of straining as well as other physiological and environmental influences. Calculations have been performed for 30 years of exposure to gravitational forces. The deformations and stress distributions in the layers of the soft tissues are described. Overall, the feasibility of using constitutive relations which reflect the highly nonlinear elastic-viscoplastic behavior of facial soft tissues in finite element based three-dimensional mechanical analyses of the human face is demonstrated. Further developments of the program are discussed in relation to possible clinical applications. Although the proposed aging function produces physically reasonable long-term response, experimental data are not yet available for more quantitative validation.

18 citations

Journal ArticleDOI
TL;DR: A DRIE etched SCSi structure was built to study the crystal strain profile in dependence of the SCSi deformation by applying a mechanical force and the numerical simulation of deformations.

16 citations

Journal ArticleDOI
TL;DR: In this paper, a 2-point bending experiment based on the so-called "2-point-bending" principle was introduced for mechanical testing of beams and wires at intermediate and high strains.

8 citations


Cited by
More filters
Journal ArticleDOI
26 Aug 2020-Nature
TL;DR: The role of viscoelasticity of tissues and extracellular matrices in cell–matrix interactions and mechanotransduction and the potential utility of vis coelastic biomaterials in regenerative medicine are explored.
Abstract: Substantial research over the past two decades has established that extracellular matrix (ECM) elasticity, or stiffness, affects fundamental cellular processes, including spreading, growth, proliferation, migration, differentiation and organoid formation. Linearly elastic polyacrylamide hydrogels and polydimethylsiloxane (PDMS) elastomers coated with ECM proteins are widely used to assess the role of stiffness, and results from such experiments are often assumed to reproduce the effect of the mechanical environment experienced by cells in vivo. However, tissues and ECMs are not linearly elastic materials-they exhibit far more complex mechanical behaviours, including viscoelasticity (a time-dependent response to loading or deformation), as well as mechanical plasticity and nonlinear elasticity. Here we review the complex mechanical behaviours of tissues and ECMs, discuss the effect of ECM viscoelasticity on cells, and describe the potential use of viscoelastic biomaterials in regenerative medicine. Recent work has revealed that matrix viscoelasticity regulates these same fundamental cell processes, and can promote behaviours that are not observed with elastic hydrogels in both two- and three-dimensional culture microenvironments. These findings have provided insights into cell-matrix interactions and how these interactions differentially modulate mechano-sensitive molecular pathways in cells. Moreover, these results suggest design guidelines for the next generation of biomaterials, with the goal of matching tissue and ECM mechanics for in vitro tissue models and applications in regenerative medicine.

776 citations

Journal ArticleDOI
TL;DR: In this paper, the authors discuss the current knowledge on the tribology of human skin and present an analysis of the available experimental results for skin friction coefficients, showing that substantial variations are a characteristic feature of friction coefficients measured for skin and that differences in skin hydration are the main cause thereof, followed by the influences of surface and material properties of contacting materials.
Abstract: In this review, we discuss the current knowledge on the tribology of human skin and present an analysis of the available experimental results for skin friction coefficients. Starting with an overview on the factors influencing the friction behaviour of skin, we discuss the up-to-date existing experimental data and compare the results for different anatomical skin areas and friction measurement techniques. For this purpose, we also estimated and analysed skin contact pressures applied during the various friction measurements. The detailed analyses show that substantial variations are a characteristic feature of friction coefficients measured for skin and that differences in skin hydration are the main cause thereof, followed by the influences of surface and material properties of the contacting materials. When the friction coefficients of skin are plotted as a function of the contact pressure, the majority of the literature data scatter over a wide range that can be explained by the adhesion friction model. The case of dry skin is reflected by relatively low and pressure-independent friction coefficients (greater than 0.2 and typically around 0.5), comparable to the dry friction of solids with rough surfaces. In contrast, the case of moist or wet skin is characterised by significantly higher (typically >1) friction coefficients that increase strongly with decreasing contact pressure and are essentially determined by the mechanical shear properties of wet skin. In several studies, effects of skin deformation mechanisms contributing to the total friction are evident from friction coefficients increasing with contact pressure. However, the corresponding friction coefficients still lie within the range delimited by the adhesion friction model. Further research effort towards the analysis of the microscopic contact area and mechanical properties of the upper skin layers is needed to improve our so far limited understanding of the complex tribological behaviour of human skin.

341 citations

Journal ArticleDOI
TL;DR: The constitutive model corresponding to the "average" liver response has been implemented into a finite element whole liver model and used for simulations related to liver surgery and the predictive capabilities of the quasi-linear viscoelastic model and the Rubin Bodner non-linear elastic-viscoplastic model are compared.

223 citations

Journal ArticleDOI
TL;DR: A novel computational model for stretch-induced skin growth during tissue expansion, which compares the spatio-temporal evolution of area growth, elastic strains, and residual stresses for four commonly available tissue expander geometries is established.
Abstract: The goal of this manuscript is to establish a novel computational model for stretch-induced skin growth during tissue expansion. Tissue expansion is a common surgical procedure to grow extra skin for reconstructing birth defects, burn injuries, or cancerous breasts. To model skin growth within the framework of nonlinear continuum mechanics, we adopt the multiplicative decomposition of the deformation gradient into an elastic and a growth part. Within this concept, we characterize growth as an irreversible, stretch-driven, transversely isotropic process parameterized in terms of a single scalar-valued growth multiplier, the in-plane area growth. To discretize its evolution in time, we apply an unconditionally stable, implicit Euler backward scheme. To discretize it in space, we utilize the finite element method. For maximum algorithmic efficiency and optimal convergence, we suggest an inner Newton iteration to locally update the growth multiplier at each integration point. This iteration is embedded within an outer Newton iteration to globally update the deformation at each finite element node. To demonstrate the characteristic features of skin growth, we simulate the process of gradual tissue expander inflation. To visualize growth-induced residual stresses, we simulate a subsequent tissue expander deflation. In particular, we compare the spatio-temporal evolution of area growth, elastic strains, and residual stresses for four commonly available tissue expander geometries. We believe that predictive computational modeling can open new avenues in reconstructive surgery to rationalize and standardize clinical process parameters such as expander geometry, expander size, expander placement, and inflation timing.

115 citations

Journal ArticleDOI
TL;DR: The objective of this paper is to provide a review on some aspects of the mathematical and computational modelling of skin biophysics, with special focus on constitutive theories based on nonlinear continuum mechanics from elasticity, through anelasticity, including growth, to thermoElasticity.
Abstract: The objective of this paper is to provide a review on some aspects of the mathematical and computational modelling of skin biophysics, with special focus on constitutive theories based on nonlinear continuum mechanics from elasticity, through anelasticity, including growth, to thermoelasticity. Microstructural and phenomenological approaches combining imaging techniques are also discussed. Finally, recent research applications on skin wrinkles will be presented to highlight the potential of physics-based modelling of skin in tackling global challenges such as ageing of the population and the associated skin degradation, diseases and traumas.

106 citations