scispace - formally typeset
Search or ask a question
Author

Olga Bubnova

Other affiliations: University of Cambridge
Bio: Olga Bubnova is an academic researcher from Linköping University. The author has contributed to research in topics: Thermoelectric generator & Thermoelectric effect. The author has an hindex of 7, co-authored 8 publications receiving 2947 citations. Previous affiliations of Olga Bubnova include University of Cambridge.

Papers
More filters
Journal ArticleDOI
TL;DR: It is shown that conducting polymers might be capable of meeting the demands of electricity production from waste heat (co-generation) and natural heat sources and to generate electricity from large volumes of warm fluids, heat exchangers must be functionalized with TEGs.
Abstract: Thermoelectric generators (TEGs) transform a heat flow into electricity. Thermoelectric materials are being investigated for electricity production from waste heat (co-generation) and natural heat sources. For temperatures below 200 °C, the best commercially available inorganic semiconductors are bismuth telluride (Bi(2)Te(3))-based alloys, which possess a figure of merit ZT close to one. Most of the recently discovered thermoelectric materials with ZT>2 exhibit one common property, namely their low lattice thermal conductivities. Nevertheless, a high ZT value is not enough to create a viable technology platform for energy harvesting. To generate electricity from large volumes of warm fluids, heat exchangers must be functionalized with TEGs. This requires thermoelectric materials that are readily synthesized, air stable, environmentally friendly and solution processable to create patterns on large areas. Here we show that conducting polymers might be capable of meeting these demands. The accurate control of the oxidation level in poly(3,4-ethylenedioxythiophene) (PEDOT) combined with its low intrinsic thermal conductivity (λ=0.37 W m(-1) K(-1)) yields a ZT=0.25 at room temperature that approaches the values required for efficient devices.

1,470 citations

Journal ArticleDOI
TL;DR: The thermoelectric properties of various poly(3,4-ethylenedioxythiophene) samples are measured, and a marked increase in the Seebeck coefficient is observed when the electrical conductivity is enhanced through molecular organization, which initiates the transition from a Fermi glass to a semi-metal.
Abstract: Polymers are lightweight, flexible, solution-processable materials that are promising for low-cost printed electronics as well as for mass-produced and large-area applications. Previous studies dem ...

705 citations

Journal ArticleDOI
TL;DR: In this paper, the possibility of using organic conducting polymers in thermoelectric applications was examined and some of the first prototypes of polymer-based OEG generators were presented.
Abstract: In response to the thread of environmental and ecological degradation along with projected fossil fuel depletion the active search for efficient renewable energy conversion technologies has been attempted in various research areas including the field of thermoelectrics. Despite the availability of considerable amounts of waste and natural heat stored in warm fluids (<250 °C) a lack of environmentally friendly materials with high natural abundance, low manufacturing cost and high thermoelectric efficiency impedes the widespread use of thermoelectric generators for energy harvesting on a large scale. In this perspective, we examine the possibility of using organic conducting polymers in thermoelectric applications. We provide an overview of the background and the key concepts of organic thermoelectrics and illustrate some of the first prototypes of polymer-based organic thermoelectric generators.

671 citations

Journal ArticleDOI
TL;DR: In this work, the thermoelectric properties of the bulk of the conducting polymer poly(3,4-ethylenedioxythiophene)-poly(styrene sulfonate) were controlled electrically by varying the gate voltage.
Abstract: While organic field-effect transistors allow the investigation of interfacial charge transport at the semiconductor-dielectric interface, an electrochemical transistor truly modifies the oxidation level and conductivity throughout the bulk of an organic semiconductor. In this work, the thermoelectric properties of the bulk of the conducting polymer poly(3,4-ethylenedioxythiophene)-poly(styrene sulfonate) were controlled electrically by varying the gate voltage. In light of the growing interest in conducting polymers as thermoelectric generators, this method provides an easy tool to study the physics behind the thermoelectric properties and to optimize polymer thermoelectrics.

262 citations

Journal ArticleDOI
TL;DR: This work uses a range of organic semiconductors that undergo singlet exciton fission to reveal the photophysical properties of entangled triplet-pair states and finds that the triplet pair is bound with respect to free triplets with an energy that is largely material independent (∼30 meV).
Abstract: Entanglement of states is one of the most surprising and counter-intuitive consequences of quantum mechanics, with potent applications in cryptography and computing. In organic materials, one particularly significant manifestation is the spin-entangled triplet-pair state, which mediates the spin-conserving fission of one spin-0 singlet exciton into two spin-1 triplet excitons. Despite long theoretical and experimental exploration, the nature of the triplet-pair state and inter-triplet interactions have proved elusive. Here we use a range of organic semiconductors that undergo singlet exciton fission to reveal the photophysical properties of entangled triplet-pair states. We find that the triplet pair is bound with respect to free triplets with an energy that is largely material independent (∼30 meV). During its lifetime, the component triplets behave cooperatively as a singlet and emit light through a Herzberg-Teller-type mechanism, resulting in vibronically structured photoluminescence. In photovoltaic blends, charge transfer can occur from the bound triplet pairs with >100% photon-to-charge conversion efficiency.

177 citations


Cited by
More filters
Journal ArticleDOI

[...]

08 Dec 2001-BMJ
TL;DR: There is, I think, something ethereal about i —the square root of minus one, which seems an odd beast at that time—an intruder hovering on the edge of reality.
Abstract: There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality. Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

33,785 citations

Journal ArticleDOI
TL;DR: This review describes the recent advances in designing high-performance bulk thermoelectric materials and highlights the decoupling of the electron and phonon transport through coherent interface, matrix/precipitate electronic bands alignment, and compositionally alloyed nanostructures.
Abstract: There has been a renaissance of interest in exploring highly efficient thermoelectric materials as a possible route to address the worldwide energy generation, utilization, and management. This review describes the recent advances in designing high-performance bulk thermoelectric materials. We begin with the fundamental stratagem of achieving the greatest thermoelectric figure of merit ZT of a given material by carrier concentration engineering, including Fermi level regulation and optimum carrier density stabilization. We proceed to discuss ways of maximizing ZT at a constant doping level, such as increase of band degeneracy (crystal structure symmetry, band convergence), enhancement of band effective mass (resonant levels, band flattening), improvement of carrier mobility (modulation doping, texturing), and decrease of lattice thermal conductivity (synergistic alloying, second-phase nanostructuring, mesostructuring, and all-length-scale hierarchical architectures). We then highlight the decoupling of th...

1,469 citations

Journal ArticleDOI
TL;DR: Reducing dopant volume is found to be as important as optimizing carrier concentration when maximizing ZT in OSCs, and this stands in sharp contrast to ISCs, for which these parameters have trade-offs.
Abstract: The conversion efficiency of heat to electricity in thermoelectric materials depends on both their thermopower and electrical conductivity. It is now reported that, unlike their inorganic counterparts, organic thermoelectric materials show an improvement in both these parameters when the volume of dopant elements is minimized; furthermore, a high conversion efficiency is achieved in PEDOT:PSS blends.

1,366 citations

Journal ArticleDOI
TL;DR: This work reviews the synthetic and electronic design strategies that have been employed thus far for producing frameworks with permanent porosity and long-range charge transport properties and selected applications for this subclass of MOFs.
Abstract: Owing to their outstanding structural, chemical, and functional diversity, metal-organic frameworks (MOFs) have attracted considerable attention over the last two decades in a variety of energy-related applications. Notably missing among these, until recently, were applications that required good charge transport coexisting with porosity and high surface area. Although most MOFs are electrical insulators, several materials in this class have recently demonstrated excellent electrical conductivity and high charge mobility. Herein we review the synthetic and electronic design strategies that have been employed thus far for producing frameworks with permanent porosity and long-range charge transport properties. In addition, key experiments that have been employed to demonstrate electrical transport, as well as selected applications for this subclass of MOFs, will be discussed.

1,279 citations

Journal ArticleDOI
TL;DR: In this article, Minnich et al. reviewed the progress made in thermoelectrics over the past two years on charge and heat carrier transport, strategies to improve the thermiolectric figure of merit, with new discussions on device physics and applications.
Abstract: This review is an update of a previous review (A. J. Minnich, et al., Energy Environ. Sci., 2009, 2, 466) published two years ago by some of the co-authors, focusing on progress made in thermoelectrics over the past two years on charge and heat carrier transport, strategies to improve the thermoelectric figure of merit, with new discussions on device physics and applications, and assessing challenges on these topics. Understanding of phonon transport in bulk materials has advanced significantly as the first-principles calculations are applied to thermoelectric materials, and experimental tools are being developed. Some new strategies have been developed to improve electron transport in thermoelectric materials. Fundamental questions on phonon and electron transport across interfaces and in thermoelectric materials remain. With thermoelectric materials reaching high ZT values well above one, the field is ready to take a step forward and go beyond the materials' figure of merit. Developing device contacts and module fabrication techniques, developing a platform for efficiency measurements, and identifying applications are becoming increasingly important for the future of thermoelectrics.

1,049 citations