Olga Nazarenko

Bio: Olga Nazarenko is an academic researcher from ETH Zurich. The author has contributed to research in topics: Perovskite (structure) & Formamidinium. The author has an hindex of 15, co-authored 22 publications receiving 1553 citations. Previous affiliations of Olga Nazarenko include Taras Shevchenko National University of Kyiv & Swiss Federal Laboratories for Materials Science and Technology.

Colloidal CsPbX3 (X = Cl, Br, I) Nanocrystals 2.0: Zwitterionic Capping Ligands for Improved Durability and Stability

Abstract: Colloidal lead halide perovskite nanocrystals (NCs) have recently emerged as versatile photonic sources. Their processing and optoelectronic applications are hampered by the loss of colloidal stability and structural integrity due to the facile desorption of surface capping molecules during isolation and purification. To address this issue, herein, we propose a new ligand capping strategy utilizing common and inexpensive long-chain zwitterionic molecules such as 3-(N,N-dimethyloctadecylammonio)propanesulfonate, resulting in much improved chemical durability. In particular, this class of ligands allows for the isolation of clean NCs with high photoluminescence quantum yields (PL QYs) of above 90% after four rounds of precipitation/redispersion along with much higher overall reaction yields of uniform and colloidal dispersible NCs. Densely packed films of these NCs exhibit high PL QY values and effective charge transport. Consequently, they exhibit photoconductivity and low thresholds for amplified spontane...

Detection of gamma photons using solution-grown single crystals of hybrid lead halide perovskites

Abstract: Cheap and sensitive gamma-ray detectors are desired for defence, medical and research applications. Solid-state gamma-radiation detectors made from solution-grown perovskites have now been demonstrated for multiple practical applications.

Highly Emissive Self‐Trapped Excitons in Fully Inorganic Zero‐Dimensional Tin Halides

Abstract: The spatial localization of charge carriers to promote the formation of bound excitons and concomitantly enhance radiative recombination has long been a goal for luminescent semiconductors. Zero-dimensional materials structurally impose carrier localization and result in the formation of localized Frenkel excitons. Now the fully inorganic, perovskite-derived zero-dimensional SnII material Cs4 SnBr6 is presented that exhibits room-temperature broad-band photoluminescence centered at 540 nm with a quantum yield (QY) of 15±5 %. A series of analogous compositions following the general formula Cs4-x Ax Sn(Br1-y Iy )6 (A=Rb, K; x≤1, y≤1) can be prepared. The emission of these materials ranges from 500 nm to 620 nm with the possibility to compositionally tune the Stokes shift and the self-trapped exciton emission bands.

High-resolution remote thermometry and thermography using luminescent low-dimensional tin-halide perovskites.

Abstract: Although metal-halide perovskites have recently revolutionized research in optoelectronics through a unique combination of performance and synthetic simplicity, their low-dimensional counterparts can further expand the field with hitherto unknown and practically useful optical functionalities. In this context, we present the strong temperature dependence of the photoluminescence lifetime of low-dimensional, perovskite-like tin-halides and apply this property to thermal imaging. The photoluminescence lifetimes are governed by the heat-assisted de-trapping of self-trapped excitons, and their values can be varied over several orders of magnitude by adjusting the temperature (up to 20 ns °C−1). Typically, this sensitive range spans up to 100 °C, and it is both compound-specific and shown to be compositionally and structurally tunable from −100 to 110 °C going from [C(NH2)3]2SnBr4 to Cs4SnBr6 and (C4N2H14I)4SnI6. Finally, through the implementation of cost-effective hardware for fluorescence lifetime imaging, based on time-of-flight technology, these thermoluminophores have been used to record thermographic videos with high spatial and thermal resolution. Low-dimensional tin-halide perovskites exhibit strong temperature dependence of luminescence decay time that translates into high sensitivity over a wide range of temperatures and as such can be used in high-resolution remote thermography.

High-resolution remote thermography using luminescent low-dimensional tin-halide perovskites

Abstract: While metal-halide perovskites have recently revolutionized research in optoelectronics through a unique combination of performance and synthetic simplicity, their low-dimensional counterparts can further expand the field with hitherto unknown and practically useful optical functionalities. In this context, we present the strong temperature dependence of the photoluminescence (PL) lifetime of low-dimensional, perovskite-like tin-halides, and apply this property to thermal imaging with a high precision of 0.05 °C. The PL lifetimes are governed by the heat-assisted de-trapping of self-trapped excitons, and their values can be varied over several orders of magnitude by adjusting the temperature (up to 20 ns °C-1). Typically, this sensitive range spans up to one hundred centigrade, and it is both compound-specific and shown to be compositionally and structurally tunable from -100 to 110 ° C going from [C(NH2)3]2SnBr4 to Cs4SnBr6 and (C4N2H14I)4SnI6. Finally, through the innovative implementation of cost-effective hardware for fluorescence lifetime imaging (FLI), based on time-of-flight (ToF) technology, these novel thermoluminophores have been used to record thermographic videos with high spatial and thermal resolution.

Methylammonium Chloride Induces Intermediate Phase Stabilization for Efficient Perovskite Solar Cells

Abstract: Summary One of the most effective methods to achieve high-performance perovskite solar cells has been to include additives that serve as dopants, crystallization agents, or passivate defect sites. Cl-based additives are among the most prevalent in literature, yet their exact role is still uncertain. In this work, we systematically study the function of methylammonium chloride (MACl) additive in formamidinium lead iodide (FAPbI3)-based perovskite. Using density functional theory, we provide a theoretical framework for understanding the interaction of MACl with a perovskite. We show that MACl successfully induces an intermediate to the pure FAPbI3 α-phase without annealing. The formation energy is related to the amount of incorporated MACl. By tuning the incorporation of MACl, the perovskite film quality can be significantly improved, exhibiting a 6× increase in grain size, a 3× increase in phase crystallinity, and a 4.3× increase in photoluminescence lifetime. The optimized solar cells achieved a certified efficiency of 23.48%.

Anion-exchange red perovskite quantum dots with ammonium iodine salts for highly efficient light-emitting devices

Abstract: Perovskite quantum dots have significant potential for light-emitting devices because of their high colour purity and colour tunability in the visible spectrum. Here, we report highly efficient red perovskite quantum dot-based light-emitting devices. The quantum dots were fabricated by anion exchange from pristine CsPbBr3 using halide-anion-containing alkyl ammonium and aryl ammonium salts. Anion-exchange quantum dots based on ammonium iodine salts exhibited a strong redshift from green emission to a deep-red emission at 649 nm as well as higher photoluminescence quantum yields. Furthermore, the quantum dot-based light-emitting device with the alkyl ammonium iodine salt exhibited an external quantum efficiency of 21.3% and high colour purity, with Commission Internationale de l’Eclairage coordinates of (0.72, 0.28), while the light-emitting device with the aryl ammonium iodine salt showed an external quantum efficiency of 14.1%. Finally, the operational stability of the latter was 36 times higher because the surface ligand density of the corresponding quantum dots was lower. Perovskite quantum dots (QDs) are synthesized via an anion-exchange process where CsPbBr3 is used to realize a highly efficient red light-emitting diode (LED). The perovskite QD-based LED exhibits the highest external quantum efficiency of more than 20% compared with perovskite LEDs.

High efficiency planar-type perovskite solar cells with negligible hysteresis using EDTA-complexed SnO2

Abstract: Even though the mesoporous-type perovskite solar cell (PSC) is known for high efficiency, its planar-type counterpart exhibits lower efficiency and hysteretic response. Herein, we report success in suppressing hysteresis and record efficiency for planar-type devices using EDTA-complexed tin oxide (SnO2) electron-transport layer. The Fermi level of EDTA-complexed SnO2 is better matched with the conduction band of perovskite, leading to high open-circuit voltage. Its electron mobility is about three times larger than that of the SnO2. The record power conversion efficiency of planar-type PSCs with EDTA-complexed SnO2 increases to 21.60% (certified at 21.52% by Newport) with negligible hysteresis. Meanwhile, the low-temperature processed EDTA-complexed SnO2 enables 18.28% efficiency for a flexible device. Moreover, the unsealed PSCs with EDTA-complexed SnO2 degrade only by 8% exposed in an ambient atmosphere after 2880 h, and only by 14% after 120 h under irradiation at 100 mW cm−2. The development of high efficiency planar-type perovskite solar cell has been lagging behind the mesoporous-type counterpart. Here Yang et al. modify the oxide based electron transporting layer with organic acid and obtain planar-type cells with high certified efficiency of 21.5% and decent stability.

Metal Halide Perovskite Nanocrystals: Synthesis, Post-Synthesis Modifications and Their Optical Properties

Abstract: Metal halide perovskites represent a flourishing area of research, driven by both their potential application in photo-voltaics and optoelectronics, and for the fundamental science underpinning their unique optoelectronic properties. The advent of colloidal methods for the synthesis of halide perovskite nanocrystals has brought to the attention inter-esting aspects of this new type of materials, above all their defect-tolerance. This review aims to provide an updated survey of this fast-moving field, with a main focus on their colloidal synthesis. We examine the chemistry and the ca-pability of different colloidal synthetic routes to control the shape, size and optical properties of the resulting nano-crystals. We also provide an up to date overview of their post-synthesis transformations, and summarize the various so-lution processes aimed at fabricating halide perovskite-based nanocomposites. We then review the fundamental optical properties of halide perovskite nanocrystals, by focusing on their linear optical properties, on the effects of quantum confinement and, then, on the current knowledge of their exciton binding energies. We also discuss the emergence of non-linear phenomena such as multiphoton absorption, biexcitons and carrier multiplication. At last, we provide an outlook in the field, with the most cogent open questions and possible future directions.

Two-Dimensional Hybrid Halide Perovskites: Principles and Promises.

Abstract: Hybrid halide perovskites have become the “next big thing” in emerging semiconductor materials, as the past decade witnessed their successful application in high-performance photovoltaics. This resurgence has encompassed enormous and widespread development of the three-dimensional (3D) perovskites, spearheaded by CH3NH3PbI3. The next generation of halide perovskites, however, is characterized by reduced dimensionality perovskites, emphasizing the two-dimensional (2D) perovskite derivatives which expand the field into a more diverse subgroup of semiconducting hybrids that possesses even higher tunability and excellent photophysical properties. In this Perspective, we begin with a historical flashback to early reports before the “perovskite fever”, and we follow this original work to its fruition in the present day, where 2D halide perovskites are in the spotlight of current research, offering characteristics desirable in high-performance optoelectronics. We approach the evolution of 2D halide perovskites f...