Oliver Ambacher

Bio: Oliver Ambacher is an academic researcher from Fraunhofer Society. The author has contributed to research in topics: Amplifier & High-electron-mobility transistor. The author has an hindex of 64, co-authored 848 publications receiving 26256 citations. Previous affiliations of Oliver Ambacher include Osram & Siemens.

Infrared Gratings Based on SiC/Si-Heterostructures

Abstract: The fabrication process and the spectral properties of gratings for the infrared wavelength region on the basis of 3C-SiC layers grown by CVD on (100) oriented Si substrates are demonstrated. The formed 3C-SiC gratings on Si support two phonon polaritons as a function of the geometrical properties excited between 10.3 and 11.4 µm. They appear as a dip in the transmission spectrum. A third minimum in the transmission spectrum is caused by the substrate – grating interaction. The obtained resonances were polarization sensitive, i.e. they appeared only under TMpolarized illumination.

Aluminium nitride membranes with embedded buried idt electrodes for novel flexural plate wave devices

Abstract: Novel flexural plate wave resonators based on bilayer AlN membranes were fabricated and investigated with respect to their piezoelectric response and residual film stress In the proposed device design, the interdigital transducers (IDTs) are embedded between two AlN films Here, chromium and aluminum were evaluated as suitable materials for IDT Using Cr is beneficial with respect to conventional microfabrication technology, whereas Al enhances overall device performance due to enhanced conductivity Finally, the proof-of-concept Lamb wave resonators were fabricated and characterized by means of laser Doppler vibrometry

2DEGs and 2DHGs Induced by Spontaneous and Piezoelectric Polarization in AlGaN/GaN Heterostructures

Abstract: Two dimensional hole and electron gases in wurtzite GaN/AlxGa1-xN/GaN heterostructures are induced by strong polarization induced effects. The sheet carrier concentration and the confinement of the two dimensional carrier gases located close to one of the AlGaN/GaN interfaces are sensitive to a high number of different physical properties such as polarity, alloy composition, strain, thickness and doping. We have investigated the structural quality, the carrier concentration profiles and electrical transport properties by a combination of high resolution x- ray diffraction, Hall effect and C-V profiling measurements. The investigated heterostructures with N- and Ga-face polarity were grown by metalorganic vapor phase or plasma induced molecular beam epitaxy covering a broad range of alloy compositions and barrier thickness. By comparison of theoretical and experimental results we demonstrate that the formation of two dimensional hole and electron gases in GaN/AlGaN/GaN heterostructures both rely on the difference of the polarization between the AlGaN and the GaN layer. In addition the role of polarity on the carrier accumulation at different interfaces in n- and p-doped heterostructures will be discussed in detail

Growth of silicon nanowires on UV-structurable glass using self-organized nucleation centres

Abstract: We report on the growth of silicon nanowires on photostructurable glass by low-pressure chemical vapour deposition. Thereby, no additional catalyst was needed to stimulate the growth process. Instead, a self-organized crystallization process leads to the formation of metallic clusters and seed crystals within the glass, which are supposed to initialize the nanowire growth. The nanowires were contacted by direct deposition of Pt using a focussed ion beam system and characterized electrically.

I and i

Abstract: There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality. Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

Principles of Neural Science

Abstract: I have developed "tennis elbow" from lugging this book around the past four weeks, but it is worth the pain, the effort, and the aspirin. It is also worth the (relatively speaking) bargain price. Including appendixes, this book contains 894 pages of text. The entire panorama of the neural sciences is surveyed and examined, and it is comprehensive in its scope, from genomes to social behaviors. The editors explicitly state that the book is designed as "an introductory text for students of biology, behavior, and medicine," but it is hard to imagine any audience, interested in any fragment of neuroscience at any level of sophistication, that would not enjoy this book. The editors have done a masterful job of weaving together the biologic, the behavioral, and the clinical sciences into a single tapestry in which everyone from the molecular biologist to the practicing psychiatrist can find and appreciate his or

Phonons and related crystal properties from density-functional perturbation theory

Abstract: This article reviews the current status of lattice-dynamical calculations in crystals, using density-functional perturbation theory, with emphasis on the plane-wave pseudopotential method. Several specialized topics are treated, including the implementation for metals, the calculation of the response to macroscopic electric fields and their relevance to long-wavelength vibrations in polar materials, the response to strain deformations, and higher-order responses. The success of this methodology is demonstrated with a number of applications existing in the literature.

Band parameters for III–V compound semiconductors and their alloys

Abstract: We present a comprehensive, up-to-date compilation of band parameters for the technologically important III–V zinc blende and wurtzite compound semiconductors: GaAs, GaSb, GaP, GaN, AlAs, AlSb, AlP, AlN, InAs, InSb, InP, and InN, along with their ternary and quaternary alloys. Based on a review of the existing literature, complete and consistent parameter sets are given for all materials. Emphasizing the quantities required for band structure calculations, we tabulate the direct and indirect energy gaps, spin-orbit, and crystal-field splittings, alloy bowing parameters, effective masses for electrons, heavy, light, and split-off holes, Luttinger parameters, interband momentum matrix elements, and deformation potentials, including temperature and alloy-composition dependences where available. Heterostructure band offsets are also given, on an absolute scale that allows any material to be aligned relative to any other.

Conjugated polymer-based organic solar cells

Abstract: The need to develop inexpensive renewable energy sources stimulates scientific research for efficient, low-cost photovoltaic devices.1 The organic, polymer-based photovoltaic elements have introduced at least the potential of obtaining cheap and easy methods to produce energy from light.2 The possibility of chemically manipulating the material properties of polymers (plastics) combined with a variety of easy and cheap processing techniques has made polymer-based materials present in almost every aspect of modern society.3 Organic semiconductors have several advantages: (a) lowcost synthesis, and (b) easy manufacture of thin film devices by vacuum evaporation/sublimation or solution cast or printing technologies. Furthermore, organic semiconductor thin films may show high absorption coefficients4 exceeding 105 cm-1, which makes them good chromophores for optoelectronic applications. The electronic band gap of organic semiconductors can be engineered by chemical synthesis for simple color changing of light emitting diodes (LEDs).5 Charge carrier mobilities as high as 10 cm2/V‚s6 made them competitive with amorphous silicon.7 This review is organized as follows. In the first part, we will give a general introduction to the materials, production techniques, working principles, critical parameters, and stability of the organic solar cells. In the second part, we will focus on conjugated polymer/fullerene bulk heterojunction solar cells, mainly on polyphenylenevinylene (PPV) derivatives/(1-(3-methoxycarbonyl) propyl-1-phenyl[6,6]C61) (PCBM) fullerene derivatives and poly(3-hexylthiophene) (P3HT)/PCBM systems. In the third part, we will discuss the alternative approaches such as polymer/polymer solar cells and organic/inorganic hybrid solar cells. In the fourth part, we will suggest possible routes for further improvements and finish with some conclusions. The different papers mentioned in the text have been chosen for didactical purposes and cannot reflect the chronology of the research field nor have a claim of completeness. The further interested reader is referred to the vast amount of quality papers published in this field during the past decade.