Oliver Ambacher

Bio: Oliver Ambacher is an academic researcher from Fraunhofer Society. The author has contributed to research in topics: Amplifier & High-electron-mobility transistor. The author has an hindex of 64, co-authored 848 publications receiving 26256 citations. Previous affiliations of Oliver Ambacher include Osram & Siemens.

PEMBE-Growth of Gallium Nitride on (0001) Sapphire: A comparison to MOCVD grown GaN

Abstract: Thin films of GaN on c-plane sapphire were grown by plasma-enhanced molecular beam epitaxy (PEMBE). The influence of different growth conditions on the quality of the epitaxial layers was studied by x-ray diffraction (XRD), atomic force microscopy (AFM) and Hall measurements. For low deposition temperatures, the growth of a thin buffer layer of AlN results in a decrease of the XRD rocking curve full width at half maximum (FWHM) but also in poorer quality in electronic and optical properties. Samples of 3μm thickness with 570 arcsec FWHM in the XRD rocking curve, a near band gap PL-emission FWHM at 5 K of 7 meV, charge carrier densities of ne = 2 × 1017 cm−3, and Hall mobilities of 270 cm2/Vs at 300 K were grown without a buffer layer. A comparison of the morphology and XRD rocking curves with those of GaN films deposited by metalorganic chemical vapour deposition (MOCVD) shows that the two methods have different growth mechanisms.

Etching of SiC with Fluorine ECR Plasma

Abstract: Electron cyclotron resonance (ECR) dry etching of 3C-SiC with different fluorinated gases, namely, sulfurhexafluoride (SF6) and tetrafluoromethane (CF4), was carried out. The influence of the gas flow, the etch gases and the applied bias voltages on the etch rate was studied. The maximum etch rates in the case of SF6 achieved were 1570 Å/min and 260 Å/min for Si and 3CSiC, respectively. In the case of CF4 the 260 Å/min (Si) and 160 Å/min (3C-SiC) were obtained. Furthermore, we investigate the selectivity of this dry etching process of SiC against Si. The residue free surface conditions were determined with Auger electron spectroscopy.

Sub-10 nanometer uncooled platinum bolometers via plasma enhanced atomic layer deposition

Abstract: We report the realization of coalescent free-standing ultra-thin (as thin as 5.5 nm) platinum layers deposited via plasma-enhanced atomic layer deposition and their characterization as an uncooled infrared detector. Such thin platinum thermistors enable a responsivity as high as 2 · 107 V/WA, an estimated noise equivalent temperature difference of 163 mK and thermal time constants on the order of 1 ms.

Microstructural characterisation of nanocrystalline GaN prepared by detonations of gallium azides

Abstract: High quality nanoscale, phase-pure hexagonal gallium nitride (GaN) crystallites have been synthesized by the thermal induced detonation of molecular precursors of the type (R3N)Ga(N3)3 (R=CH3, C2H5, etc.). The method allows the control of the particle size regime from 2 to about 1000 nm. X-ray diffraction and Rietveld simulations revealed an anisotropic platelet-like shape of the particles. The obtained GaN material was as well characterized by transmission electron microscopy and electron diffraction, photoluminescence spectroscopy, SEM, IR, RAMAN, thermal gas effusion/mass spectrometry, thermal analysis, elemental analysis. Gas absorption measurements (BET method) showed a specific surface area of about 90 m2 · g−1. © 1998 John Wiley & Sons, Ltd.

Novel semi-reactively-matched multistage broadband power amplifier architecture for monolithic ICs in GaN technology

Abstract: This paper reports on a novel broadband amplifier architecture suitable for wide bandwidth applications such as electronic warfare systems. The proposed topology comprises a distributed active power splitter to function as a driver stage for a reactively-matched power amplifier. As a result, a purely resistive interstage impedance is obtained and therefore the proposed architecture allows wider bandwidth operation as compared to the conventional reactively-matched multistage topology. Due to the traveling wave amplifier character of the driver stage, the presented novel amplifier topology is named semi-reactively-matched amplifier. A 6GHz to 20GHz dualstage high power amplifier MMIC is designed and realized in order to demonstrate the capabilities of the new concept. The MMIC is based on a 0.25μm gate length AlGaN/GaN HEMT microstrip transmission line technology. It shows a measured small-signal gain of (18 ± 4)dB over the entire frequency range. The saturated output power is higher than 4.5W at 20GHz in continuous wave operation.

I and i

Abstract: There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality. Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

Principles of Neural Science

Abstract: I have developed "tennis elbow" from lugging this book around the past four weeks, but it is worth the pain, the effort, and the aspirin. It is also worth the (relatively speaking) bargain price. Including appendixes, this book contains 894 pages of text. The entire panorama of the neural sciences is surveyed and examined, and it is comprehensive in its scope, from genomes to social behaviors. The editors explicitly state that the book is designed as "an introductory text for students of biology, behavior, and medicine," but it is hard to imagine any audience, interested in any fragment of neuroscience at any level of sophistication, that would not enjoy this book. The editors have done a masterful job of weaving together the biologic, the behavioral, and the clinical sciences into a single tapestry in which everyone from the molecular biologist to the practicing psychiatrist can find and appreciate his or

Phonons and related crystal properties from density-functional perturbation theory

Abstract: This article reviews the current status of lattice-dynamical calculations in crystals, using density-functional perturbation theory, with emphasis on the plane-wave pseudopotential method. Several specialized topics are treated, including the implementation for metals, the calculation of the response to macroscopic electric fields and their relevance to long-wavelength vibrations in polar materials, the response to strain deformations, and higher-order responses. The success of this methodology is demonstrated with a number of applications existing in the literature.

Band parameters for III–V compound semiconductors and their alloys

Abstract: We present a comprehensive, up-to-date compilation of band parameters for the technologically important III–V zinc blende and wurtzite compound semiconductors: GaAs, GaSb, GaP, GaN, AlAs, AlSb, AlP, AlN, InAs, InSb, InP, and InN, along with their ternary and quaternary alloys. Based on a review of the existing literature, complete and consistent parameter sets are given for all materials. Emphasizing the quantities required for band structure calculations, we tabulate the direct and indirect energy gaps, spin-orbit, and crystal-field splittings, alloy bowing parameters, effective masses for electrons, heavy, light, and split-off holes, Luttinger parameters, interband momentum matrix elements, and deformation potentials, including temperature and alloy-composition dependences where available. Heterostructure band offsets are also given, on an absolute scale that allows any material to be aligned relative to any other.

Conjugated polymer-based organic solar cells

Abstract: The need to develop inexpensive renewable energy sources stimulates scientific research for efficient, low-cost photovoltaic devices.1 The organic, polymer-based photovoltaic elements have introduced at least the potential of obtaining cheap and easy methods to produce energy from light.2 The possibility of chemically manipulating the material properties of polymers (plastics) combined with a variety of easy and cheap processing techniques has made polymer-based materials present in almost every aspect of modern society.3 Organic semiconductors have several advantages: (a) lowcost synthesis, and (b) easy manufacture of thin film devices by vacuum evaporation/sublimation or solution cast or printing technologies. Furthermore, organic semiconductor thin films may show high absorption coefficients4 exceeding 105 cm-1, which makes them good chromophores for optoelectronic applications. The electronic band gap of organic semiconductors can be engineered by chemical synthesis for simple color changing of light emitting diodes (LEDs).5 Charge carrier mobilities as high as 10 cm2/V‚s6 made them competitive with amorphous silicon.7 This review is organized as follows. In the first part, we will give a general introduction to the materials, production techniques, working principles, critical parameters, and stability of the organic solar cells. In the second part, we will focus on conjugated polymer/fullerene bulk heterojunction solar cells, mainly on polyphenylenevinylene (PPV) derivatives/(1-(3-methoxycarbonyl) propyl-1-phenyl[6,6]C61) (PCBM) fullerene derivatives and poly(3-hexylthiophene) (P3HT)/PCBM systems. In the third part, we will discuss the alternative approaches such as polymer/polymer solar cells and organic/inorganic hybrid solar cells. In the fourth part, we will suggest possible routes for further improvements and finish with some conclusions. The different papers mentioned in the text have been chosen for didactical purposes and cannot reflect the chronology of the research field nor have a claim of completeness. The further interested reader is referred to the vast amount of quality papers published in this field during the past decade.