Oliver Ambacher

Bio: Oliver Ambacher is an academic researcher from Fraunhofer Society. The author has contributed to research in topics: Amplifier & High-electron-mobility transistor. The author has an hindex of 64, co-authored 848 publications receiving 26256 citations. Previous affiliations of Oliver Ambacher include Osram & Siemens.

Novel Sensor Applications of group-III nitrides

Abstract: The present paper gives an overview over different sensor applications of GaN thin films and AlGaN/GaN heterostructures. The response of Pt-GaN Schottky diodes towards hydrogen and hydrogen containing gases is analysed and their gas sensitivity is characterized from room temperature up to 600°C. In addition, the sheet carrier density of a two dimensional electron gas confined at the heterointerface in AlGaN/GaN high electron mobility transistors (HEMTs) is shown to be significantly influenced by changes in the electronic properties of the device surface. This effect is successfully exploited for the realization of ion detectors and sensors for fluid monitoring based on AlGaN/GaN HEMTs with non-metalized gate areas. Promising possibilities of fabricating monolithically integrated sensor devices for wireless signal transmission are demonstrated by the realization of SAW devices on epitaxial AlN-films.

Photoreflectance studiesof N‐ and Ga‐face AlGaN/GaN heterostructures confininga polarisation induced 2DEG

Abstract: Photoreflectance measurements have been carried out in order to determine the electric field strength F within the topmost layers of Ga-face polarity Al x Ga 1-x N/GaN and N-face polarity GaN/Al x Ga 1-x N/GaN heterostructures containing high-mobile polarisation induced 2DEGs. For both types of samples F decreased from 400 kV/cm at room temperature up to 200 kV/cm when cooling down the structure to T = 5K. Our results strongly emphasise the existence of surface donor and surface acceptor states of the Ga- and N-face samples, respectively. The temperature dependence of F is explained by the change of the piezoelectric and spontaneous polarization. From self-consistent conduction band calculations the bare surface potential was obtained.

A portable W-band radar system for enhancement of infrared vision in fire fighting operations

Abstract: In this paper, we present a millimeter wave radar system which will enhance the performance of infrared cameras used for fire-fighting applications. The radar module is compact and lightweight such that the system can be combined with inertial sensors and integrated in a hand-held infrared camera. This allows for precise distance measurements in harsh environmental conditions, such as tunnel or industrial fires, where optical sensors are unreliable or fail. We discuss the design of the RF front-end, the antenna and a quasi-optical lens for beam shaping as well as signal processing and demonstrate the performance of the system by in situ measurements in a smoke filled environment.

A novel bio-functionalization of AlGaN/GaN-ISFETs for DNA-sensors

Abstract: AlGaN/GaN pH sensitive devices were functionalized and passivated for the use as selective biosensors. For the passivation, a multilayer of SiO2 and SiNx is proposed, which stabilizes the pH-sensor, is biocompatible and has no negative impact on the following bio-functionalization. The functionalization of the GaN-surface was achieved by covalent bonding of 10-amino-dec-1-ene molecules by a photochemical process. After exposure to ultraviolet light, islands of TFAAD are growing on the sensor surface. After 3 h exposure one monolayer is completed. Further exposure results in thicker films as a consequence of polymerization. The bonding to the sensor surface was analyzed by x-ray photo electron spectroscopy, while the thickness of the functionalization was determined by atomic force microscopy scratching experiments. These functionalized devices based on the pH-sensitive AlGaN/GaN ISFET will establish a new family of adaptive, selective biomolecular sensors such as selective, reusable DNA sensors. (© 2010 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)

The role of Ge predeposition temperature in the MBE epitaxy of SiC on Ssilicon

Abstract: An alternative method for stress relaxation in the SiC/Si heteroepitaxial system based on the incorporation of a group-IV element (germanium) into the interface between SiC and Si is presented. We have investigated the effect of the temperature during the predeposition of 1 ML of Ge on a silicon (111) surface, prior to the MBE carbonization. The resulting structures were investigated by transmission electron microscopy (TEM), x-ray diffraction (XRD), secondary ion mass spectrometry (SIMS) and Fourier transform infrared spectroscopy (FTIR). The crystalline quality of the 3C-SiC layer was improved by the Ge predeposition, as shown by XRD measurements and by the smaller damping constants of the TO and LO phonons in the FTIR analysis. As the temperature of Ge predeposition increases, the SiC layer exhibits lower residual strain and larger grain size. Furthermore, the incorporation of Ge at the interface suppresses the outdiffusion of Si from the substrate to the surface of the growing SiC layer and, therefore, impedes the formation of voids at the SiC/Si interface. TEM and SIMS results revealed a strong segregation of Ge at the interface leading to an increased stress relaxation, in agreement with theoretical predictions. (© 2004 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)

I and i

Abstract: There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality. Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

Principles of Neural Science

Abstract: I have developed "tennis elbow" from lugging this book around the past four weeks, but it is worth the pain, the effort, and the aspirin. It is also worth the (relatively speaking) bargain price. Including appendixes, this book contains 894 pages of text. The entire panorama of the neural sciences is surveyed and examined, and it is comprehensive in its scope, from genomes to social behaviors. The editors explicitly state that the book is designed as "an introductory text for students of biology, behavior, and medicine," but it is hard to imagine any audience, interested in any fragment of neuroscience at any level of sophistication, that would not enjoy this book. The editors have done a masterful job of weaving together the biologic, the behavioral, and the clinical sciences into a single tapestry in which everyone from the molecular biologist to the practicing psychiatrist can find and appreciate his or

Phonons and related crystal properties from density-functional perturbation theory

Abstract: This article reviews the current status of lattice-dynamical calculations in crystals, using density-functional perturbation theory, with emphasis on the plane-wave pseudopotential method. Several specialized topics are treated, including the implementation for metals, the calculation of the response to macroscopic electric fields and their relevance to long-wavelength vibrations in polar materials, the response to strain deformations, and higher-order responses. The success of this methodology is demonstrated with a number of applications existing in the literature.

Band parameters for III–V compound semiconductors and their alloys

Abstract: We present a comprehensive, up-to-date compilation of band parameters for the technologically important III–V zinc blende and wurtzite compound semiconductors: GaAs, GaSb, GaP, GaN, AlAs, AlSb, AlP, AlN, InAs, InSb, InP, and InN, along with their ternary and quaternary alloys. Based on a review of the existing literature, complete and consistent parameter sets are given for all materials. Emphasizing the quantities required for band structure calculations, we tabulate the direct and indirect energy gaps, spin-orbit, and crystal-field splittings, alloy bowing parameters, effective masses for electrons, heavy, light, and split-off holes, Luttinger parameters, interband momentum matrix elements, and deformation potentials, including temperature and alloy-composition dependences where available. Heterostructure band offsets are also given, on an absolute scale that allows any material to be aligned relative to any other.

Conjugated polymer-based organic solar cells

Abstract: The need to develop inexpensive renewable energy sources stimulates scientific research for efficient, low-cost photovoltaic devices.1 The organic, polymer-based photovoltaic elements have introduced at least the potential of obtaining cheap and easy methods to produce energy from light.2 The possibility of chemically manipulating the material properties of polymers (plastics) combined with a variety of easy and cheap processing techniques has made polymer-based materials present in almost every aspect of modern society.3 Organic semiconductors have several advantages: (a) lowcost synthesis, and (b) easy manufacture of thin film devices by vacuum evaporation/sublimation or solution cast or printing technologies. Furthermore, organic semiconductor thin films may show high absorption coefficients4 exceeding 105 cm-1, which makes them good chromophores for optoelectronic applications. The electronic band gap of organic semiconductors can be engineered by chemical synthesis for simple color changing of light emitting diodes (LEDs).5 Charge carrier mobilities as high as 10 cm2/V‚s6 made them competitive with amorphous silicon.7 This review is organized as follows. In the first part, we will give a general introduction to the materials, production techniques, working principles, critical parameters, and stability of the organic solar cells. In the second part, we will focus on conjugated polymer/fullerene bulk heterojunction solar cells, mainly on polyphenylenevinylene (PPV) derivatives/(1-(3-methoxycarbonyl) propyl-1-phenyl[6,6]C61) (PCBM) fullerene derivatives and poly(3-hexylthiophene) (P3HT)/PCBM systems. In the third part, we will discuss the alternative approaches such as polymer/polymer solar cells and organic/inorganic hybrid solar cells. In the fourth part, we will suggest possible routes for further improvements and finish with some conclusions. The different papers mentioned in the text have been chosen for didactical purposes and cannot reflect the chronology of the research field nor have a claim of completeness. The further interested reader is referred to the vast amount of quality papers published in this field during the past decade.