Olivier Dufaud

Bio: Olivier Dufaud is an academic researcher from University of Lorraine. The author has contributed to research in topics: Dust explosion & Ignition system. The author has an hindex of 21, co-authored 80 publications receiving 1396 citations. Previous affiliations of Olivier Dufaud include Nancy-Université & Centre national de la recherche scientifique.

Experimental investigation and modelling of aluminum dusts explosions in the 20 L sphere

Abstract: An experimental investigation was carried out on the influences of dust concentration, particle size distribution and humidity on aluminum dust explosion. Tests were mainly conducted thanks to a 20 L explosion sphere. The effect of humidity was studied by storing the aluminum particles at constant relative humidity until the sorption equilibrium or by introducing water vapour in the explosion vessel. The tested particles sizes ranged from a volume median diameter of 7 to 42 μm and the dust concentrations were up to 3000 g m−3. Among other results, the strong influence of the particle size was pointed out, especially when the Sauter mean diameter is considered. These results stressed the predominance of the specific surface area on the mass median particle diameter. The effect of water on aluminum dust explosion was decoupled: on the one hand, when water adsorption occurs, hydrogen generation leads to an increase of the explosion severity; on the other hand, when the explosion of dried aluminum powder occurs in a humid atmosphere, the inhibiting effect of humidity is put forward. A model based on mass and heat balances, assuming a shrinking core model with chemical reaction limitation, leads to a satisfactory representation of the pressure evolution during the dust explosion.

Dust/vapour explosions : Hybrid behaviours?

Abstract: This article underlines the peculiar behaviour of hybrid mixtures towards explosions. It should notably be noticed that there are more than additive effects on explosions severity, especially on the maximum rate of pressure rise. Moreover, the evolution of the maximum explosion pressure as a function of combustibles concentrations shows that the impact of hybrid mixtures is perceptible even for vapour amounts or dust concentrations lower than the explosion limits of the pure compounds.

Additive manufacturing: technology, applications and research needs

Abstract: Additive manufacturing (AM) technology has been researched and developed for more than 20 years. Rather than removing materials, AM processes make three-dimensional parts directly from CAD models by adding materials layer by layer, offering the beneficial ability to build parts with geometric and material complexities that could not be produced by subtractive manufacturing processes. Through intensive research over the past two decades, significant progress has been made in the development and commercialization of new and innovative AM processes, as well as numerous practical applications in aerospace, automotive, biomedical, energy and other fields. This paper reviews the main processes, materials and applications of the current AM technology and presents future research needs for this technology.

A review on 3D micro-additive manufacturing technologies

Abstract: New microproducts need the utilization of a diversity of materials and have complicated three-dimensional (3D) microstructures with high aspect ratios. To date, many micromanufacturing processes have been developed but specific class of such processes are applicable for fabrication of functional and true 3D microcomponents/assemblies. The aptitude to process a broad range of materials and the ability to fabricate functional and geometrically complicated 3D microstructures provides the additive manufacturing (AM) processes some profits over traditional methods, such as lithography-based or micromachining approaches investigated widely in the past. In this paper, 3D micro-AM processes have been classified into three main groups, including scalable micro-AM systems, 3D direct writing, and hybrid processes, and the key processes have been reviewed comprehensively. Principle and recent progress of each 3D micro-AM process has been described, and the advantages and disadvantages of each process have been presented.

Additive Manufacturing of Ceramic‐Based Materials

Abstract: This paper offers a review of present achievements in the field of processing of ceramic-based materials with complex geometry using the main additive manufacturing (AM) technologies In AM, the geometrical design of a desired ceramic-based component is combined with the materials design In this way, the fabrication times and the product costs of ceramic-based parts with required properties can be substantially reduced However, dimensional accuracy and surface finish still remain crucial features in today's AM due to the layer-by-layer formation of the parts In spite of the fact that significant progress has been made in the development of feedstock materials, the most difficult limitations for AM technologies are the restrictions set by material selection for each AM method and aspects considering the inner architectural design of the manufactured parts Hence, any future progress in the field of AM should be based on the improvement of the existing technologies or, alternatively, the development of new approaches with an emphasis on parts allowing the near-net formation of ceramic structures, while optimizing the design of new materials and of the part architecture

Lasers in additive manufacturing: A review

Abstract: In recent years, additive manufacturing, also known as three-dimensional (3D) printing, has emerged as an environmentally friendly green manufacturing technology which brings great benefits, such as energy saving, less material consumption, and efficient production. These advantages are attributed to the successive material deposition at designated target areas by delivering the energy on it. In this regard, lasers are the most effective energy source in additive manufacturing since the laser beam can transfer a large amount of energy into micro-scale focal region instantaneously to solidify or cure materials in air, therefore enabling high-precision and high-throughput manufacturing for a wide range of materials. In this paper, we introduce laser-based additive manufacturing methods and review the types of lasers widely used in 3D printing machines. Important laser parameters relevant to additive manufacturing will be analyzed and general guidelines for selecting suitable lasers for additive manufacturing will be provided. Discussion on future prospects of laser technologies for additive manufacturing will be finally covered.