Olivier Gourhant

Bio: Olivier Gourhant is an academic researcher from STMicroelectronics. The author has contributed to research in topics: Curing (chemistry) & Thin film. The author has an hindex of 11, co-authored 35 publications receiving 621 citations. Previous affiliations of Olivier Gourhant include Commissariat à l'énergie atomique et aux énergies alternatives.

A 55 nm triple gate oxide 9 metal layers SiGe BiCMOS technology featuring 320 GHz f T / 370 GHz f MAX HBT and high-Q millimeter-wave passives

Abstract: This paper presents the first 55 nm SiGe BiCMOS technology developed on a 300 mm wafer line in STMicroelectronics. The technology features Low Power (LP) and General Purpose (GP) CMOS devices and 0.45 µm2 6T-SRAM bit cell. High Speed (HS) HBT exhibits 320 GHz f T and 370 GHz f MAX associated with a CML ring oscillator gate delay τ D of 2.34 ps. Transmission lines, capacitors, high-Q varactors and inductors dedicated to millimeter-wave applications are also available.

A multi-wavelength 3D-compatible silicon photonics platform on 300mm SOI wafers for 25Gb/s applications

Abstract: Recently Silicon Photonics has generated an outstanding interest for integrated optical communications. In this paper we describe a 300mm Silicon Photonics platform designed for 25Gb/s and above applications at the three typical communication wavelengths and compatible with 3D integration. Main process features and device results are described.

14nm FDSOI technology for high speed and energy efficient applications

Abstract: This paper presents a 14nm technology designed for high speed and energy efficient applications using strain-engineered FDSOI transistors. Compared to the 28nm FDSOI technology, this 14nm FDSOI technology provides 0.55× area scaling and delivers a 30% speed boost at the same power, or a 55% power reduction at the same speed, due to an increase in drive current and low gate-to-drain capacitance. Using forward back bias (FBB) we experimentally demonstrate that the power efficiency of this technology provides an additional 40% dynamic power reduction for ring oscillators working at the same speed. Finally, a full single-port SRAM offering is reported, including an 0.081°m 2 high-density bitcell and two 0.090°m 2 bitcell flavors used to address high performance and low leakage-low Vmin requirements.

The role of ultraviolet radiation during ultralow k films curing: Strengthening mechanisms and sacrificial porogen removal

Abstract: This work proposes a fundamental understanding of structural transformation occurring during porogen extraction from as-deposited ultralow k (ULK) materials when exposed to ultraviolet (UV) radiation during thermal curing. Specific explanations are provided for as deposited films at high temperature (T>250 °C). This temperature range is sufficient to assess thin-film stability. Two distinguished regimes were identified in the curing process. During the first stage, the film shrinks strongly in similar proportion to SiCH3 break. Preferential impact of UV radiation on hydrocarbon porogen bonds leads also to a break of SiCH3 structures. In this work, 5 min of curing is enough to remove the porogen and create the max of porosity (33%). After the porogen removal step, the porous film shrinks under UV radiation leading to an increase of SiOSi bond concentration. A structural rearrangement of the bulk is initiated since the porogen is totally evacuated from the film. The increase of normalized infrared SiOSi pea...

Crosslinking of porous SiOCH films involving Si-O-C bonds: Impact of deposition and curing

Abstract: This paper focuses on the properties of nanoporous SiOCH thin films deposited using a porogen approach by plasma enhanced chemical vapor deposition. The impact of deposition temperature, porogen loading and porogen removal treatment is investigated using Fourier transform infrared spectroscopy, solid-state nuclear magnetic resonance analysis, and electrical and mechanical measurements. This work shows that a higher deposition temperature allows limiting the film shrinkage during the porogen removal treatment and leads to the best compromise in term of electrical and mechanical properties. Beside, the effect of Si–O–C bonds on the enhancement of mechanical properties is promoted since a typical crosslinking mechanism is highlighted in case of ultraviolet curing.

Phd by thesis

Abstract: Deposits of clastic carbonate-dominated (calciclastic) sedimentary slope systems in the rock record have been identified mostly as linearly-consistent carbonate apron deposits, even though most ancient clastic carbonate slope deposits fit the submarine fan systems better. Calciclastic submarine fans are consequently rarely described and are poorly understood. Subsequently, very little is known especially in mud-dominated calciclastic submarine fan systems. Presented in this study are a sedimentological core and petrographic characterisation of samples from eleven boreholes from the Lower Carboniferous of Bowland Basin (Northwest England) that reveals a >250 m thick calciturbidite complex deposited in a calciclastic submarine fan setting. Seven facies are recognised from core and thin section characterisation and are grouped into three carbonate turbidite sequences. They include: 1) Calciturbidites, comprising mostly of highto low-density, wavy-laminated bioclast-rich facies; 2) low-density densite mudstones which are characterised by planar laminated and unlaminated muddominated facies; and 3) Calcidebrites which are muddy or hyper-concentrated debrisflow deposits occurring as poorly-sorted, chaotic, mud-supported floatstones. These

Roadmap on silicon photonics

Abstract: Silicon photonics research can be dated back to the 1980s. However, the previous decade has witnessed an explosive growth in the field. Silicon photonics is a disruptive technology that is poised to revolutionize a number of application areas, for example, data centers, high-performance computing and sensing. The key driving force behind silicon photonics is the ability to use CMOS-like fabrication resulting in high-volume production at low cost. This is a key enabling factor for bringing photonics to a range of technology areas where the costs of implementation using traditional photonic elements such as those used for the telecommunications industry would be prohibitive. Silicon does however have a number of shortcomings as a photonic material. In its basic form it is not an ideal material in which to produce light sources, optical modulators or photodetectors for example. A wealth of research effort from both academia and industry in recent years has fueled the demonstration of multiple solutions to these and other problems, and as time progresses new approaches are increasingly being conceived. It is clear that silicon photonics has a bright future. However, with a growing number of approaches available, what will the silicon photonic integrated circuit of the future look like? This roadmap on silicon photonics delves into the different technology and application areas of the field giving an insight into the state-of-the-art as well as current and future challenges faced by researchers worldwide. Contributions authored by experts from both industry and academia provide an overview and outlook for the silicon waveguide platform, optical sources, optical modulators, photodetectors, integration approaches, packaging, applications of silicon photonics and approaches required to satisfy applications at mid-infrared wavelengths. Advances in science and technology required to meet challenges faced by the field in each of these areas are also addressed together with predictions of where the field is destined to reach.

Low dielectric constant materials.

Abstract: Modern computer microprocessor chips are marvels of engineering complexity. For the current 45 nm technology node, there may be nearly a billion transistors on a chip barely 1 cm2 and more than 10 000 m of wiring connecting and powering these devices distributed over 9-10 wiring levels. This represents quite an advance from the first INTEL 4004B microprocessor chip introduced in 1971 with 10 μm minimum dimensions and 2 300 transistors on the chip! It has been disclosed that advanced microprocessor chips at the 32 nm node will have more than 2 billion transistors.1 For instance, Figure 1 shows a sectional 3D image of a 90 nm IBM microprocessor, containing several hundred million integrated devices and 10 levels of interconnect wiring, designated as the back-end-of-the-line (BEOL). Since the invention of microprocessors, the number of active devices on a chip has been exponentially increasing, approximately doubling every two years. This trend was first described in 1965 by Gordon Moore,2 although the original discussion suggested doubling the number of devices every year, and the phenomenon became popularly known as Moore’s Law. This progress has proven remarkably resilient and has persisted for more than 50 years. The enabler that has permitted these advances is known as scaling, that is, the reduction of minimum device dimensions by lithographic advances (photoresists, tooling, and process integration optimization) by ∼30% for each device generation.3 It allowed more active devices to be incorporated in a given area and improved the operating characteristics of the individual transistors. It should be emphasized that the earlier improvements in chip performance were achieved with very few changes in the materials used in the construction of the chips themselves. The increase of performance with scaling * Corresponding author. E-mail: gdubois@us.ibm.com. † IBM Almaden Research Center. ‡ Stanford University. Willi Volksen received his B.S. in Chemistry (magna cum laude) from New Mexico Institute of Mining and Technology in 1972 and his Ph.D. in Chemistry/Polymer Science from the University of Massachusetts, Lowell, in 1975. He then joined the research group of Prof. Harry Gray/Dr. Alan Rembaum at the California Institute of Technology as a postdoctoral fellow and upon completion of the one-year appointment joined Dr. Rembaum at the Jet Propulsion Laboratory as a Senior Chemist in 1976. In 1977 Dr. Volksen joined the IBM Research Division at the IBM Almaden Research Center in San Jose, CA, where he is an active research staff member in the Advanced Materials Group of the Science and Technology function.

Integrating photonics with silicon nanoelectronics for the next generation of systems on a chip.

Abstract: Electronic and photonic technologies have transformed our lives-from computing and mobile devices, to information technology and the internet. Our future demands in these fields require innovation in each technology separately, but also depend on our ability to harness their complementary physics through integrated solutions1,2. This goal is hindered by the fact that most silicon nanotechnologies-which enable our processors, computer memory, communications chips and image sensors-rely on bulk silicon substrates, a cost-effective solution with an abundant supply chain, but with substantial limitations for the integration of photonic functions. Here we introduce photonics into bulk silicon complementary metal-oxide-semiconductor (CMOS) chips using a layer of polycrystalline silicon deposited on silicon oxide (glass) islands fabricated alongside transistors. We use this single deposited layer to realize optical waveguides and resonators, high-speed optical modulators and sensitive avalanche photodetectors. We integrated this photonic platform with a 65-nanometre-transistor bulk CMOS process technology inside a 300-millimetre-diameter-wafer microelectronics foundry. We then implemented integrated high-speed optical transceivers in this platform that operate at ten gigabits per second, composed of millions of transistors, and arrayed on a single optical bus for wavelength division multiplexing, to address the demand for high-bandwidth optical interconnects in data centres and high-performance computing3,4. By decoupling the formation of photonic devices from that of transistors, this integration approach can achieve many of the goals of multi-chip solutions 5 , but with the performance, complexity and scalability of 'systems on a chip'1,6-8. As transistors smaller than ten nanometres across become commercially available 9 , and as new nanotechnologies emerge10,11, this approach could provide a way to integrate photonics with state-of-the-art nanoelectronics.