Showing papers by "Osama M. Mukdadi published in 2020"

Finite-Element Study of Biomechanical Explanations for Bone Loss around Dental Implants.

Abstract: Since the advent of osteointegrated implantology and its precepts issued by the Swedish School, assessment of peri-implant bone loss criteria has often been debated by professionals in this field. Long-term success of dental implants is highly reliant on structural and functional osseointegration between implant and surrounding intraoral tissues. In this context, the current study aims to provide biomechanical explanations for causes of bone loss around the dental implant after osseointegration by computational analysis, using a three-dimensional finite-element (FE) method. We design an approximate virtual model that includes the smooth, cylindrical dental implant and alveolar bone. We use SolidWorks software and export to ABAQUS for computational stress analysis at the bone-implant interface. The numerical model is created and loaded with a compressive occlusal force that is applied at the top of the implant platform. We thoroughly investigate the generated FE results and stress responses of the bone-implant system. The developed model is extremely useful for indicating biomechanical phenomena in the bone-implant interface that play a key part in bone loss around the dental implant. In addition, obtained results tend to deliver an improved understanding to designers in the biomedical engineering field and in dentistry.

Biomechanical Evaluation of Bone Quality Effect on Stresses at Bone-Implant Interface: A Finite Element Study

Abstract: The aim of this study is to evaluate the effect of the alveolar bone quality on von Mises stress at the bone-implant interface during occlusal loading. Four (3D) finite element models of fully osteointegrated 3-mm diameter × 11.5-mm length dental implant indifferent alveolar bone with different cortical bone thickness are created, using SolidWorks computer aided design software. The alveolar bone cortical-spongy bone ratio modelled includes I) 90%-10%, II) 60%-40%, III) 40%-60%, and IV) 10%-90%. These models are then exported to ABAQUS software and stress analyses are run under an occlusal load of 70 N acting on the platform face of the dental implant. Results of this study show that the implants are subjected to similar stress distributions in all models; maximum stress values are confined in the outer cervical plate of the cortical bone around the neck. This could explain bone loss and implant de-osseointegration. Peak stresses are lowest in the model with 90% cortical bone (14.2 MPa) and almost doubled in the model with 10% cortical bone (26.6 MPa). The stress values gradually reduce towards the apical area, demonstrating masticatory force transfer from implant to bone. Furthermore, both cortical and spongy bone structures exhibit highest stress values in the model with thinnest cortical layer. The high interfacial stress concentration near the implant-cortical bone junction could lead to bone failure or implant instability induced by fatigue or overload risk. Results of our study could be a first step towards the development of a clinical pre-operative planning tool for dental implantolgy.