Ove Edfors

Bio: Ove Edfors is an academic researcher from Lund University. The author has contributed to research in topics: MIMO & Communication channel. The author has an hindex of 43, co-authored 230 publications receiving 17923 citations. Previous affiliations of Ove Edfors include Luleå University of Technology.

Massive MIMO for next generation wireless systems

Abstract: Multi-user MIMO offers big advantages over conventional point-to-point MIMO: it works with cheap single-antenna terminals, a rich scattering environment is not required, and resource allocation is simplified because every active terminal utilizes all of the time-frequency bins. However, multi-user MIMO, as originally envisioned, with roughly equal numbers of service antennas and terminals and frequency-division duplex operation, is not a scalable technology. Massive MIMO (also known as large-scale antenna systems, very large MIMO, hyper MIMO, full-dimension MIMO, and ARGOS) makes a clean break with current practice through the use of a large excess of service antennas over active terminals and time-division duplex operation. Extra antennas help by focusing energy into ever smaller regions of space to bring huge improvements in throughput and radiated energy efficiency. Other benefits of massive MIMO include extensive use of inexpensive low-power components, reduced latency, simplification of the MAC layer, and robustness against intentional jamming. The anticipated throughput depends on the propagation environment providing asymptotically orthogonal channels to the terminals, but so far experiments have not disclosed any limitations in this regard. While massive MIMO renders many traditional research problems irrelevant, it uncovers entirely new problems that urgently need attention: the challenge of making many low-cost low-precision components that work effectively together, acquisition and synchronization for newly joined terminals, the exploitation of extra degrees of freedom provided by the excess of service antennas, reducing internal power consumption to achieve total energy efficiency reductions, and finding new deployment scenarios. This article presents an overview of the massive MIMO concept and contemporary research on the topic.

Scaling up MIMO: Opportunities and Challenges with Very Large Arrays

Abstract: This paper surveys recent advances in the area of very large MIMO systems. With very large MIMO, we think of systems that use antenna arrays with an order of magnitude more elements than in systems being built today, say a hundred antennas or more. Very large MIMO entails an unprecedented number of antennas simultaneously serving a much smaller number of terminals. The disparity in number emerges as a desirable operating condition and a practical one as well. The number of terminals that can be simultaneously served is limited, not by the number of antennas, but rather by our inability to acquire channel-state information for an unlimited number of terminals. Larger numbers of terminals can always be accommodated by combining very large MIMO technology with conventional time- and frequency-division multiplexing via OFDM. Very large MIMO arrays is a new research field both in communication theory, propagation, and electronics and represents a paradigm shift in the way of thinking both with regards to theory, systems and implementation. The ultimate vision of very large MIMO systems is that the antenna array would consist of small active antenna units, plugged into an (optical) fieldbus.

On channel estimation in OFDM systems

Abstract: The use of multi-amplitude signaling schemes in wireless OFDM systems requires the tracking of the fading radio channel. The paper addresses channel estimation based on time-domain channel statistics. Using a general model for a slowly fading channel, the authors present the MMSE and LS estimators and a method for modifications compromising between complexity and performance. The symbol error rate for a 18-QAM system is presented by means of simulation results. Depending upon estimator complexity, up to 4 dB in SNR can be gained over the LS estimator.

OFDM channel estimation by singular value decomposition

Abstract: We present and analyze low-rank channel estimators for orthogonal frequency-division multiplexing (OFDM) systems using the frequency correlation of the channel. Low-rank approximations based on the discrete Fourier transform (DFT) have been proposed, but these suffer from poor performance when the channel is not sample spaced. We apply the theory of optimal rank-reduction to linear minimum mean-squared error (LMMSE) estimators and show that these estimators, when using a fixed design, are robust to changes in channel correlation and signal-to-noise ratio (SNR). The performance is presented in terms of uncoded symbol-error rate (SER) for a system using 16-quadrature amplitude modulation (QAM).

Beyond Massive MIMO: The Potential of Data Transmission With Large Intelligent Surfaces

Abstract: In this paper, we consider the potential of data transmission in a system with a massive number of radiating and sensing elements, thought of as a contiguous surface of electromagnetically active material. We refer to this as a large intelligent surface (LIS), which is a newly proposed concept and conceptually goes beyond contemporary massive MIMO technology. First, we consider capacities of single-antenna autonomous terminals communicating to the LIS where the entire surface is used as a receiving antenna array in a perfect line-of-sight propagation environment. Under the condition that the surface area is sufficiently large, the received signal after a matched-filtering operation can be closely approximated by a sinc-function-like intersymbol interference channel. Second, we analyze a normalized capacity measured per unit surface, for a fixed transmit power per volume unit with different terminal deployments. As terminal density increases, the limit of the normalized capacity [nats/s/Hz/volume-unit] achieved when wavelength $\lambda$ approaches zero is equal to half of the transmit power per volume unit divided by the noise spatial power spectral density. Third, we show that the number of independent signal dimensions that can be harvested per meter deployed surface is $2/\lambda$ for one-dimensional terminal deployment, and $\pi /\lambda ^2$ per square meter for two- and three-dimensional terminal deployments. Finally, we consider implementations of the LIS in the form of a grid of conventional antenna elements, and show that the sampling lattice that minimizes the surface area and simultaneously obtains one independent signal dimension for every spent antenna is the hexagonal lattice.

What Will 5G Be

Abstract: What will 5G be? What it will not be is an incremental advance on 4G. The previous four generations of cellular technology have each been a major paradigm shift that has broken backward compatibility. Indeed, 5G will need to be a paradigm shift that includes very high carrier frequencies with massive bandwidths, extreme base station and device densities, and unprecedented numbers of antennas. However, unlike the previous four generations, it will also be highly integrative: tying any new 5G air interface and spectrum together with LTE and WiFi to provide universal high-rate coverage and a seamless user experience. To support this, the core network will also have to reach unprecedented levels of flexibility and intelligence, spectrum regulation will need to be rethought and improved, and energy and cost efficiencies will become even more critical considerations. This paper discusses all of these topics, identifying key challenges for future research and preliminary 5G standardization activities, while providing a comprehensive overview of the current literature, and in particular of the papers appearing in this special issue.

Millimeter Wave Mobile Communications for 5G Cellular: It Will Work!

Abstract: The global bandwidth shortage facing wireless carriers has motivated the exploration of the underutilized millimeter wave (mm-wave) frequency spectrum for future broadband cellular communication networks. There is, however, little knowledge about cellular mm-wave propagation in densely populated indoor and outdoor environments. Obtaining this information is vital for the design and operation of future fifth generation cellular networks that use the mm-wave spectrum. In this paper, we present the motivation for new mm-wave cellular systems, methodology, and hardware for measurements and offer a variety of measurement results that show 28 and 38 GHz frequencies can be used when employing steerable directional antennas at base stations and mobile devices.

Massive MIMO for next generation wireless systems

Abstract: Multi-user MIMO offers big advantages over conventional point-to-point MIMO: it works with cheap single-antenna terminals, a rich scattering environment is not required, and resource allocation is simplified because every active terminal utilizes all of the time-frequency bins. However, multi-user MIMO, as originally envisioned, with roughly equal numbers of service antennas and terminals and frequency-division duplex operation, is not a scalable technology. Massive MIMO (also known as large-scale antenna systems, very large MIMO, hyper MIMO, full-dimension MIMO, and ARGOS) makes a clean break with current practice through the use of a large excess of service antennas over active terminals and time-division duplex operation. Extra antennas help by focusing energy into ever smaller regions of space to bring huge improvements in throughput and radiated energy efficiency. Other benefits of massive MIMO include extensive use of inexpensive low-power components, reduced latency, simplification of the MAC layer, and robustness against intentional jamming. The anticipated throughput depends on the propagation environment providing asymptotically orthogonal channels to the terminals, but so far experiments have not disclosed any limitations in this regard. While massive MIMO renders many traditional research problems irrelevant, it uncovers entirely new problems that urgently need attention: the challenge of making many low-cost low-precision components that work effectively together, acquisition and synchronization for newly joined terminals, the exploitation of extra degrees of freedom provided by the excess of service antennas, reducing internal power consumption to achieve total energy efficiency reductions, and finding new deployment scenarios. This article presents an overview of the massive MIMO concept and contemporary research on the topic.

Intelligent Reflecting Surface Enhanced Wireless Network via Joint Active and Passive Beamforming

Abstract: Intelligent reflecting surface (IRS) is a revolutionary and transformative technology for achieving spectrum and energy efficient wireless communication cost-effectively in the future. Specifically, an IRS consists of a large number of low-cost passive elements each being able to reflect the incident signal independently with an adjustable phase shift so as to collaboratively achieve three-dimensional (3D) passive beamforming without the need of any transmit radio-frequency (RF) chains. In this paper, we study an IRS-aided single-cell wireless system where one IRS is deployed to assist in the communications between a multi-antenna access point (AP) and multiple single-antenna users. We formulate and solve new problems to minimize the total transmit power at the AP by jointly optimizing the transmit beamforming by active antenna array at the AP and reflect beamforming by passive phase shifters at the IRS, subject to users’ individual signal-to-interference-plus-noise ratio (SINR) constraints. Moreover, we analyze the asymptotic performance of IRS’s passive beamforming with infinitely large number of reflecting elements and compare it to that of the traditional active beamforming/relaying. Simulation results demonstrate that an IRS-aided MIMO system can achieve the same rate performance as a benchmark massive MIMO system without using IRS, but with significantly reduced active antennas/RF chains. We also draw useful insights into optimally deploying IRS in future wireless systems.