P. Alagusundaramoorthy

Bio: P. Alagusundaramoorthy is an academic researcher from Indian Institute of Technology Madras. The author has contributed to research in topics: Flexural strength & Sandwich-structured composite. The author has an hindex of 12, co-authored 33 publications receiving 437 citations. Previous affiliations of P. Alagusundaramoorthy include University of Kentucky.

Experimental study on the flexural behavior of insulated concrete sandwich panels with wires as shear connectors

Abstract: Composite structural elements can serve dual purposes of transferring the load and insulating the buildings. This paper presents and discusses the results of experimental study carried out to understand the flexural behavior of prototype precast insulated concrete sandwich panels using truss-shaped continuous shear connectors. Experimental study consisted of four prototype concrete sandwich panels tested under four-point bending simulating one-way slab action. Panel thickness and size of wire mesh used as reinforcement in concrete wythes are the major parameters considered. Test results indicate that the truss-shaped shear connectors are effective to achieve composite action of the panels until failure. Test results also indicate that the panel thickness affects the flexural load carrying capacity, and size of wire mesh affects the ductility. Experimental and analytical studies are required in this area towards developing guidelines for design of concrete sandwich panels for field applications.

Fiber-Reinforced Polymer Composites: Manufacturing, Properties, and Applications.

Abstract: Composites have been found to be the most promising and discerning material available in this century. Presently, composites reinforced with fibers of synthetic or natural materials are gaining more importance as demands for lightweight materials with high strength for specific applications are growing in the market. Fiber-reinforced polymer composite offers not only high strength to weight ratio, but also reveals exceptional properties such as high durability; stiffness; damping property; flexural strength; and resistance to corrosion, wear, impact, and fire. These wide ranges of diverse features have led composite materials to find applications in mechanical, construction, aerospace, automobile, biomedical, marine, and many other manufacturing industries. Performance of composite materials predominantly depends on their constituent elements and manufacturing techniques, therefore, functional properties of various fibers available worldwide, their classifications, and the manufacturing techniques used to fabricate the composite materials need to be studied in order to figure out the optimized characteristic of the material for the desired application. An overview of a diverse range of fibers, their properties, functionality, classification, and various fiber composite manufacturing techniques is presented to discover the optimized fiber-reinforced composite material for significant applications. Their exceptional performance in the numerous fields of applications have made fiber-reinforced composite materials a promising alternative over solitary metals or alloys.

A critical review of retrofitting methods for unreinforced masonry structures

Abstract: Unreinforced masonry (URM) buildings are common throughout Latin America, the Himalayan region, Eastern Europe, Indian subcontinent and other parts of Asia. It has been observed that these buildings cannot withstand the lateral loads imposed by an earthquake and often fails, in a brittle manner. Methods for retrofitting URM buildings to increase the time required for collapse and also to improve the overall strength widely vary. This review has collated information on various types of retrofitting methods either under research or early implementation. Furthermore, these methods are categorized and critically analyzed to help further understand which methods are most suitable for future research or application in developing countries. The comparison of the different methods is based on economy, sustainability and buildability and provides a useful insight. The study may provide useful guidance to policy makers, planners, designers, architects and engineers in choosing a suitable retrofitting methodology.

Effects of Ratio of CFRP Plate Length to Shear Span and End Anchorage on Flexural Behavior of SCC RC Beams

Abstract: The aim of this experimental investigation is to study the effect of the ratio of carbon fiber-reinforced polymer (CFRP) precured laminate length to shear span and different end plate anchorage systems on the flexural behavior of reinforced concrete (RC) beams cast with self-consolidating concrete (SCC). SCC with a grade of 54 MPa has been used throughout this research to ensure consistent high quality and high concrete compressive strength in all beams and to eliminate the need of any compaction. Ten RC beams strengthened with CFRP plate lengths to shear span ratio of 0, 25, 70, and 85% with and without end anchorages, were tested under monotonic loading. In particular, a single layer of U-wrap sheet and two layers of U-wrap sheets with one layer in the longitudinal direction and the other in the transverse direction were used as end anchorages (double wrap). The results were compared with each other and with those of the same test conducted on an unstrengthened control beam specimen. The load-deflection...

Evaluation of sandwich panels with various polyurethane foam-cores and ribs

Abstract: The objective of this study was to evaluate three potential core alternatives for glass fiber reinforced polymer (GFRP) foam-core sandwich panels. The proposed system could reduce the initial production costs and the manufacturing difficulties while improving the system performance. Three different polyurethane foam configurations were considered for the inner core, and the most suitable system was recommended for further prototyping. These configurations consisted of high-density polyurethane foam (Type 1), a bidirectional gridwork of thin, interconnecting, GFRP webs that is in-filled with lowdensity polyurethane foam (Type 2), and trapezoidal-shaped, low-density polyurethane foam utilizing GFRP web layers (Type 3). The facings of the three cores consisted of three plies of bidirectional E-glass woven fabric within a compatible polyurethane resin. Several types of small-scale experimental investigations were conducted. The results from this study indicated that the Types 1 and 2 cores were very weak and flexible making their implementation in bridge deck panels less practical. The Type 3 core possessed a higher strength and stiffness than the other two types. Therefore, this type is recommended for the proposed sandwich system to serve as a candidate for further development. Additionally, a finite element model (FEM) was developed using software package ABAQUS for the Type 3 system to further investigate its structural behavior. This model was successfully compared to experimental data indicating its suitability for parametric analysis of panels and their design.