scispace - formally typeset
Search or ask a question
Author

P. Peumans

Bio: P. Peumans is an academic researcher. The author has contributed to research in topics: Work function & Double heterostructure. The author has an hindex of 1, co-authored 1 publications receiving 1058 citations.

Papers
More filters
Journal ArticleDOI
TL;DR: In this paper, the authors demonstrate an external power conversion efficiency of (3.6±0.2)% under AM 1.5 spectral illumination of 150 mW/cm2 (1.5 suns) with vacuum-deposited copper phthalocyanine/C60 thin-film double-heterostructure photovoltaic cells incorporating an exciton blocking layer (EBL).
Abstract: We demonstrate an external power conversion efficiency of (3.6±0.2)% under AM1.5 spectral illumination of 150 mW/cm2 (1.5 suns) with vacuum-deposited copper phthalocyanine/C60 thin-film double-heterostructure photovoltaic cells incorporating an exciton-blocking layer (EBL). We show that the anode work function influences the photocarrier collection characteristics through the built-in electric field. The cell parameters are less sensitive to the cathode work function, which is attributed to cathode-induced defect states in the EBL energy gap. The presence of these defect states also explains the surprisingly low resistance of the EBL to electron transport. We anticipate significant further improvements in power conversion efficiency by employing optimal structures in light-trapping geometries.

1,073 citations


Cited by
More filters
Journal ArticleDOI
29 Apr 2004-Nature
TL;DR: The future holds even greater promise for this technology, with an entirely new generation of ultralow-cost, lightweight and even flexible electronic devices in the offing, which will perform functions traditionally accomplished using much more expensive components based on conventional semiconductor materials such as silicon.
Abstract: Organic electronics are beginning to make significant inroads into the commercial world, and if the field continues to progress at its current, rapid pace, electronics based on organic thin-film materials will soon become a mainstay of our technological existence. Already products based on active thin-film organic devices are in the market place, most notably the displays of several mobile electronic appliances. Yet the future holds even greater promise for this technology, with an entirely new generation of ultralow-cost, lightweight and even flexible electronic devices in the offing, which will perform functions traditionally accomplished using much more expensive components based on conventional semiconductor materials such as silicon.

4,967 citations

Journal ArticleDOI
Chengliang Wang1, Huanli Dong1, Wenping Hu1, Yunqi Liu1, Daoben Zhu1 
TL;DR: The focus of this review will be on the performance analysis of π-conjugated systems in OFETs, a kind of device consisting of an organic semiconducting layer, a gate insulator layer, and three terminals that provide an important insight into the charge transport of ρconjugate systems.
Abstract: Since the discovery of highly conducting polyacetylene by Shirakawa, MacDiarmid, and Heeger in 1977, π-conjugated systems have attracted much attention as futuristic materials for the development and production of the next generation of electronics, that is, organic electronics. Conceptually, organic electronics are quite different from conventional inorganic solid state electronics because the structural versatility of organic semiconductors allows for the incorporation of functionality by molecular design. This versatility leads to a new era in the design of electronic devices. To date, the great number of π-conjugated semiconducting materials that have either been discovered or synthesized generate an exciting library of π-conjugated systems for use in organic electronics. 11 However, some key challenges for further advancement remain: the low mobility and stability of organic semiconductors, the lack of knowledge regarding structure property relationships for understanding the fundamental chemical aspects behind the structural design, and realization of desired properties. Organic field-effect transistors (OFETs) are a kind of device consisting of an organic semiconducting layer, a gate insulator layer, and three terminals (drain, source, and gate electrodes). OFETs are not only essential building blocks for the next generation of cheap and flexible organic circuits, but they also provide an important insight into the charge transport of πconjugated systems. Therefore, they act as strong tools for the exploration of the structure property relationships of πconjugated systems, such as parameters of field-effect mobility (μ, the drift velocity of carriers under unit electric field), current on/off ratio (the ratio of the maximum on-state current to the minimum off-state current), and threshold voltage (the minimum gate voltage that is required to turn on the transistor). 17 Since the discovery of OFETs in the 1980s, they have attracted much attention. Research onOFETs includes the discovery, design, and synthesis of π-conjugated systems for OFETs, device optimization, development of applications in radio frequency identification (RFID) tags, flexible displays, electronic papers, sensors, and so forth. It is beyond the scope of this review to cover all aspects of π-conjugated systems; hence, our focus will be on the performance analysis of π-conjugated systems in OFETs. This should make it possible to extract information regarding the fundamental merit of semiconducting π-conjugated materials and capture what is needed for newmaterials and what is the synthesis orientation of newπ-conjugated systems. In fact, for a new science with many practical applications, the field of organic electronics is progressing extremely rapidly. For example, using “organic field effect transistor” or “organic field effect transistors” as the query keywords to search the Web of Science citation database, it is possible to show the distribution of papers over recent years as shown in Figure 1A. It is very clear

2,942 citations

Journal ArticleDOI
TL;DR: In this paper, the double heterojunction was proposed to confine excitons within the active layers, allowing substantially higher internal efficiencies to be achieved, and a full optical and electrical analysis of the double-heterostructure architecture leads to optimal cell design as a function of the optical properties and exciton diffusion lengths of the photoactive materials.
Abstract: In this review, we discuss the physics underlying the operation of single and multiple heterojunction, vacuum-deposited organic solar cells based on small molecular weight thin films. For single heterojunction cells, we find that the need for direct contact between the deposited electrode and the active organics leads to quenching of excitons. An improved device architecture, the double heterojunction, is shown to confine excitons within the active layers, allowing substantially higher internal efficiencies to be achieved. A full optical and electrical analysis of the double heterostructure architecture leads to optimal cell design as a function of the optical properties and exciton diffusion lengths of the photoactive materials. Combining the double heterostructure with novel light trapping schemes, devices with external efficiencies approaching their internal efficiency are obtained. When applied to an organic photovoltaic cell with a power conversion efficiency of 1.0%±0.1% under 1 sun AM1.5 illuminati...

2,722 citations

Journal ArticleDOI
TL;DR: The current status of the field of organic solar cells and the important parameters to improve their performance are discussed in this paper. But, the two competitive production techniques used today are either wet solution processing or dry thermal evaporation of the organic constituents.
Abstract: Organic solar cell research has developed during the past 30 years, but especially in the last decade it has attracted scientific and economic interest triggered by a rapid increase in power conversion efficiencies. This was achieved by the introduction of new materials, improved materials engineering, and more sophisticated device structures. Today, solar power conversion efficiencies in excess of 3% have been accomplished with several device concepts. Though efficiencies of these thin-film organicdevices have not yet reached those of their inorganic counterparts (η ≈ 10–20%); the perspective of cheap production (employing, e.g., roll-to-roll processes) drives the development of organic photovoltaic devices further in a dynamic way. The two competitive production techniques used today are either wet solution processing or dry thermal evaporation of the organic constituents. The field of organic solar cells profited well from the development of light-emitting diodes based on similar technologies, which have entered the market recently. We review here the current status of the field of organic solar cells and discuss different production technologies as well as study the important parameters to improve their performance.

2,492 citations

Journal ArticleDOI
TL;DR: The backbone of a π-conjugated polymer is comprised of a linear series of overlapping pz orbitals that have formed via sp2 hybridization, thereby creating a conjugated chain of delocalized electron density, which dictates the electronic characteristics of the polymer.
Abstract: In recent years, organic solar cells utilizing π-conjugated polymers have attracted widespread interest in both the academic and, increasingly, the commercial communities. These polymers are promising in terms of their electronic properties, low cost, versatility of functionalization, thin film flexibility, and ease of processing. These factors indicate that organic solar cells, although currently producing relatively low power conversion efficiencies (∼5-7%),1–3 compared to inorganic solar cells, have the potential to compete effectively with alternative solar cell technologies. However, in order for this to be feasible, the efficiencies of organic solar cells need further improvement. This is the focus of extensive studies worldwide. The backbone of a π-conjugated polymer is comprised of a linear series of overlapping pz orbitals that have formed via sp2 hybridization, thereby creating a conjugated chain of delocalized electron density. It is the interaction of these π electrons that dictates the electronic characteristics of the polymer. The energy levels become closely spaced as the delocalization length increases, resulting in a ‘band’ structure somewhat similar to that observed in inorganic solid-state semiconductors. In contrast to the latter, however, the primary photoexcitations in conjugated polymers are bound electron-hole pairs (excitons) rather than free charge carriers; this is largely due to their low dielectric constant and the presence of significant electron-lattice interactions and electron correlation effects.4 In the absence of a mechanism to dissociate the excitons into free charge carriers, the exciton will undergo radiative and nonradiative decay, with a typical exciton lifetime in the range from 100 ps to 1 ns. Achieving efficient charge photogeneration has long been recognized as a vital challenge for molecular-based solar cells. For example, the first organic solar cells were simple single-layer devices based on the pristine polymer and two electrodes of different work function. These devices, based on a Schottky diode structure, resulted in poor photocurrent efficiency.5–7 Relatively efficient photocurrent generation in an organic device was first reported by Tang in 1986,8 employing a vacuum-deposited CuPc/ perylene derivative donor/acceptor bilayer device. The differing electron affinities (and/or ionization potentials) between these two materials created an energy offset at their interface, thereby driving exciton dissociation. However, the efficiency of such bilayer devices is limited by the requirement of exciton diffusion to the donor/acceptor interface, typically requiring film thicknesses less than the optical absorption depth. Organic materials usually exhibit exciton diffusion lengths of ∼10 nm and optical absorption depths of 100 nm, although we note significant progress is now being made with organic materials with exciton diffusion lengths comparable to or exceeding their optical absorption depth.9–12 The observation of ultrafast photoinduced electron transfer13,14 from a conjugated polymer to C60 and the * To whom correspondence should be addressed. E-mail: j.durrant@ imperial.ac.uk. Chem. Rev. 2010, 110, 6736–6767 6736

2,061 citations