scispace - formally typeset
Search or ask a question
Author

Parag R. Gogate

Other affiliations: University of Mumbai
Bio: Parag R. Gogate is an academic researcher from Institute of Chemical Technology. The author has contributed to research in topics: Catalysis & Cavitation. The author has an hindex of 75, co-authored 373 publications receiving 19976 citations. Previous affiliations of Parag R. Gogate include University of Mumbai.


Papers
More filters
Journal ArticleDOI
TL;DR: In this article, the authors highlight five different oxidation processes operating at ambient conditions viz. cavitation, photocatalytic oxidation, Fenton's chemistry, ozonation, and use of hydrogen peroxide.

1,852 citations

Journal ArticleDOI
TL;DR: In the first part of this two article series on the imperative technologies for wastewater treatment, a review of oxidation processes operating at ambient conditions was presented It has been observed that none of the methods can be used individually in wastewater treatment applications with good economics and high degree of energy efficiency Moreover, the knowledge required for the large-scale design and application is perhaps lacking as mentioned in this paper.

898 citations

Journal ArticleDOI
TL;DR: An overview of the applications of the cavitation phenomenon in the specific area of biochemical engineering/biotechnology, discussing the areas of application, the role of cavitation, the observed enhancement and its causes by highlighting some typical examples is provided in this paper.

535 citations

Journal ArticleDOI
TL;DR: In this article, the authors present an exhaustive overview of different aspects of ultrasound assisted extraction of various natural products and provide recommendations for optimum operating conditions have been reported for maximizing the yield.
Abstract: Extraction of active chemical compounds from natural products is one of the most important research areas for pharmaceutical and chemical industries. Traditional techniques used for the solvent extraction of natural products are associated with longer extraction times and lower yields, use of large amount of organic solvents and poor extraction efficiency. Ultrasound can be effectively used to improve the extraction rate by increasing the mass transfer rates and possible rupture of cell wall due to formation of microcavities leading to higher product yields with reduced processing time and solvent consumption. The present work presents an exhaustive overview of different aspects of ultrasound assisted extraction (UAE) of various natural products. Mechanism of UAE has been discussed and recommendations for optimum operating conditions have been reported for maximizing the yield. An overview of different applications of UAE has been also presented. Possible intensification of UAE by coupling with traditional solvent and supercritical extraction processes has also been discussed. Overall it appears that ultrasonic irradiations can be effectively used for intensification of the extraction of important constituents from natural products.

471 citations

Journal ArticleDOI
TL;DR: In this article, a unified approach for the selection of different operating and geometric parameters for large scale sonochemical reactors with a special emphasis on heterogeneous systems is presented, where the authors make recommendations for optimum selection of frequency of irradiation and power dissipation rate/irradiation intensity as well as the liquid phase physicochemical properties.

451 citations


Cited by
More filters
Journal ArticleDOI
TL;DR: The various aspects associated with the design of microalgae production units are described, giving an overview of the current state of development of algae cultivation systems (photo-bioreactors and open ponds).
Abstract: Sustainable production of renewable energy is being hotly debated globally since it is increasingly understood that first generation biofuels, primarily produced from food crops and mostly oil seeds are limited in their ability to achieve targets for biofuel production, climate change mitigation and economic growth. These concerns have increased the interest in developing second generation biofuels produced from non-food feedstocks such as microalgae, which potentially offer greatest opportunities in the longer term. This paper reviews the current status of microalgae use for biodiesel production, including their cultivation, harvesting, and processing. The microalgae species most used for biodiesel production are presented and their main advantages described in comparison with other available biodiesel feedstocks. The various aspects associated with the design of microalgae production units are described, giving an overview of the current state of development of algae cultivation systems (photo-bioreactors and open ponds). Other potential applications and products from microalgae are also presented such as for biological sequestration of CO 2 , wastewater treatment, in human health, as food additive, and for aquaculture.

5,158 citations

Journal ArticleDOI
TL;DR: For the first time, a multi-variables optimization approach is described to determine the optimum operation parameters so as to enhance process performance and photooxidation efficiency in the photocatalytic water treatment process.

4,293 citations

Journal ArticleDOI
TL;DR: In this paper, the complex mechanisms of Fenton and Fenton-like reactions and the important factors influencing these reactions, from both a fundamental and practical perspective, in applications to water and soil treatment, are discussed.
Abstract: Fenton chemistry encompasses reactions of hydrogen peroxide in the presence of iron to generate highly reactive species such as the hydroxyl radical and possibly others. In this review, the complex mechanisms of Fenton and Fenton-like reactions and the important factors influencing these reactions, from both a fundamental and practical perspective, in applications to water and soil treatment, are discussed. The review covers modified versions including the photoassisted Fenton reaction, use of chelated iron, electro-Fenton reactions, and Fenton reactions using heterogeneous catalysts. Sections are devoted to nonclassical pathways, by-products, kinetics and process modeling, experimental design methodology, soil and aquifer treatment, use of Fenton in combination with other advanced oxidation processes or biodegradation, economic comparison with other advanced oxidation processes, and case studies.

3,218 citations

Journal ArticleDOI
TL;DR: Electro-Fenton (EF) Process 6585 4.2.1.
Abstract: 2.2. Fenton’s Chemistry 6575 2.2.1. Origins 6575 2.2.2. Fenton Process 6575 2.3. Photo-Fenton Process 6577 3. H2O2 Electrogeneration for Water Treatment 6577 3.1. Fundamentals 6578 3.2. Cathode Materials 6579 3.3. Divided Cells 6580 3.4. Undivided Cells 6583 4. Electro-Fenton (EF) Process 6585 4.1. Origins 6585 4.2. Fundamentals of EF for Water Remediation 6586 4.2.1. Cell Configuration 6586 4.2.2. Cathodic Fe2+ Regeneration 6586 4.2.3. Anodic Generation of Heterogeneous Hydroxyl Radical 6587

2,652 citations

Journal ArticleDOI
TL;DR: A review of the use of the TiO 2 photocatalyst for remediation and decontamination of wastewater, report the recent work done, important achievements and problems is presented in this paper, however, a lot more is needed from engineering design and modelling for successful application of the laboratory scale techniques to large scale operation.
Abstract: Even though heterogeneous photocatalysis appeared in many forms, photodegradation of organic pollutants has recently been the most widely investigated. By far, titania has played a much larger role in this scenario compared to other semiconductor photocatalysts due to its cost effectiveness, inert nature and photostability. Extensive literature analysis has shown many possibilities of improving the efficiency of photodecomposition over titania by combining the photoprocess with either physical or chemical operations. The resulting combined processes revealed a flexible line of action for wastewater treatment technologies. The choice of treatment method usually depends upon the composition of the wastewater. However, a lot more is needed from engineering design and modelling for successful application of the laboratory scale techniques to large-scale operation. The present review paper seeks to offer an overview of the dramatic trend in the use of the TiO 2 photocatalyst for remediation and decontamination of wastewater, report the recent work done, important achievements and problems.

2,573 citations