Patrick M Martin

Bio: Patrick M Martin is an academic researcher from Oak Ridge National Laboratory. The author has contributed to research in topics: Pulsed laser deposition & Texture (crystalline). The author has an hindex of 33, co-authored 91 publications receiving 5219 citations. Previous affiliations of Patrick M Martin include University of Tennessee & American Superconductor.

High critical current density superconducting tapes by epitaxial deposition of YBa2Cu3Ox thick films on biaxially textured metals

Abstract: A method to obtain long lengths of flexible, biaxially oriented substrates with smooth, chemically compatible surfaces for epitaxial growth of high‐temperature superconductors is reported. The technique uses well established, industrially scalable, thermomechanical processes to impart a strong biaxial texture to a base metal. This is followed by vapor deposition of epitaxial buffer layers (metal and/or ceramic) to yield chemically compatible surfaces. Epitaxial YBa2Cu3Ox films grown on such substrates have critical current densities exceeding 105 A/cm2 at 77 K in zero field and have field dependencies similar to epitaxial films on single crystal ceramic substrates. Deposited conductors made using this technique offer a potential route for the fabrication of long lengths of high‐Jc wire capable of carrying high currents in high magnetic fields and at elevated temperatures.

High critical current density superconducting tapes by epitaxial deposition of YBa2Cu3Ox thick films on biaxially textured metals

Abstract: A method to obtain long lengths of flexible, biaxially oriented substrates with smooth, chemically compatible surfaces for epitaxial growth of high‐temperature superconductors is reported. The technique uses well established, industrially scalable, thermomechanical processes to impart a strong biaxial texture to a base metal. This is followed by vapor deposition of epitaxial buffer layers (metal and/or ceramic) to yield chemically compatible surfaces. Epitaxial YBa2Cu3Ox films grown on such substrates have critical current densities exceeding 105 A/cm2 at 77 K in zero field and have field dependencies similar to epitaxial films on single crystal ceramic substrates. Deposited conductors made using this technique offer a potential route for the fabrication of long lengths of high‐Jc wire capable of carrying high currents in high magnetic fields and at elevated temperatures.

Irradiation-free, columnar defects comprised of self-assembled nanodots and nanorods resulting in strongly enhanced flux-pinning in YBa2Cu3O7−δ films

Abstract: The development of biaxially textured, second-generation, high-temperature superconducting (HTS) wires is expected to enable most large-scale applications of HTS materials, in particular electric-power applications. For many potential applications, high critical currents in applied magnetic fields are required. It is well known that columnar defects generated by irradiating high-temperature superconducting materials with heavy ions significantly enhance the in-field critical current density. Hence, for over a decade scientists world-wide have sought means to produce such columnar defects in HTS materials without the expense and complexity of ionizing radiation. Using a simple and practically scalable technique, we have succeeded in producing long, nearly continuous vortex pins along the c-axis in YBa2Cu3O7?? (YBCO), in the form of self-assembled stacks of BaZrO3 (BZO) nanodots and nanorods. The nanodots and nanorods have a diameter of ~2?3?nm and an areal density ('matching field') of 8?10?T for 2?vol.% incorporation of BaZrO3. In addition, four misfit dislocations around each nanodot or nanorod are aligned and act as extended columnar defects. YBCO films with such defects exhibit significantly enhanced pinning with less sensitivity to magnetic fields H. In particular, at intermediate field values, the current density, Jc, varies as Jc~H??, with ?~0.3 rather than the usual values 0.5?0.65. Similar results were also obtained for CaZrO3 (CZO) and YSZ incorporation in the form of nanodots and nanorods within YBCO, indicating the broad applicability of the developed process. The process could also be used to incorporate self-assembled nanodots and nanorods within matrices of other materials for different applications, such as magnetic materials.

High-performance high-TC superconducting wires.

Abstract: We demonstrated short segments of a superconducting wire that meets or exceeds performance requirements for many large-scale applications of high-temperature superconducting materials, especially those requiring a high supercurrent and/or a high engineering critical current density in applied magnetic fields. The performance requirements for these varied applications were met in 3-micrometer-thick YBa 2 Cu 3 O 7-δ films epitaxially grown via pulsed laser ablation on rolling assisted biaxially textured substrates. Enhancements of the critical current in self-field as well as excellent retention of this current in high applied magnetic fields were achieved in the thick films via incorporation of a periodic array of extended columnar defects, composed of self-aligned nanodots of nonsuperconducting material extending through the entire thickness of the film. These columnar defects are highly effective in pinning the superconducting vortices or flux lines, thereby resulting in the substantially enhanced performance of this wire.

Growth of biaxially textured buffer layers on rolled-Ni substrates by electron beam evaporation

Abstract: This paper describes the development of two buffer layer architectures on rolled-Ni substrates using an electron beam evaporation technique. The first buffer layer architecture consists of an epitaxial laminate of CeO 2 /Pd/Ni. The second alternative buffer layer consistes of an epitaxial laminate of YSZ/CeO 2 /Ni. The cube (100) texture in the Ni was produced by cold-rolling followed by recrystallization. The CeO 2 films were grown epitaxially on both Pd-buffered and textured-Ni substrates. The YSZ films were grown epitaxially on CeO 2 -buffered Ni substrates. The crystallographic orientation of the Pd, CeO 2 , and YSZ films were all (100). We also studied the effect of CeO 2 layer thickness and crack formation on textured-Ni substrates. The layer thickness was found to be critical. For some thickness, cracks formed in the CeO 2 layer. The presence of YSZ layers on the CeO 2 layers seem alleviate the cracks that are formed underneath. Our SEM studies showed that both CeO 2 (3–10 nm thick underlayer) and YSZ layers were smooth and continuous.

Addition of nanoparticle dispersions to enhance flux pinning of the YBa2Cu3O7-x superconductor

Abstract: Following the discovery of type-II high-temperature superconductors in 1986 (refs 1, 2), work has proceeded to develop these materials for power applications. One of the problems, however, has been that magnetic flux is not completely expelled, but rather is contained within magnetic fluxons, whose motion prevents larger supercurrents. It is known that the critical current of these materials can be enhanced by incorporating a high density of extended defects to act as pinning centres for the fluxons. YBa2Cu3O7 (YBCO or 123) is the most promising material for such applications at higher temperatures (liquid nitrogen). Pinning is optimized when the size of the defects approaches the superconducting coherence length ( approximately 2-4 nm for YBCO at temperatures < or =77 K) and when the areal number density of defects is of the order of (H/2) x 10(11) cm(-2), where H is the applied magnetic field in tesla. Such a high density has been difficult to achieve by material-processing methods that maintain a nanosize defect, except through irradiation. Here we report a method for achieving a dispersion of approximately 8-nm-sized nanoparticles in YBCO with a high number density, which increases the critical current (at 77 K) by a factor of two to three for high magnetic fields.

Materials science challenges for high-temperature superconducting wire

Abstract: Twenty years ago in a series of amazing discoveries it was found that a large family of ceramic cuprate materials exhibited superconductivity at temperatures above, and in some cases well above, that of liquid nitrogen. Imaginations were energized by the thought of applications for zero-resistance conductors cooled with an inexpensive and readily available cryogen. Early optimism, however, was soon tempered by the hard realities of these new materials: brittle ceramics are not easily formed into long flexible conductors; high current levels require near-perfect crystallinity; and — the downside of high transition temperature — performance drops rapidly in a magnetic field. Despite these formidable obstacles, thousands of kilometres of high-temperature superconducting wire have now been manufactured for demonstrations of transmission cables, motors and other electrical power components. The question is whether the advantages of superconducting wire, such as efficiency and compactness, can outweigh the disadvantage: cost. The remaining task for materials scientists is to return to the fundamentals and squeeze as much performance as possible from these wonderful and difficult materials.

Epitaxial YBa2Cu3O7 on Biaxially Textured Nickel (001): An Approach to Superconducting Tapes with High Critical Current Density

Abstract: In-plane—aligned, c axis—oriented YBa2Cu3O7 (YBCO) films with superconducting critical current densities Jc as high as 700,000 amperes per square centimeter at 77 kelvin have been grown on thermomechanically rolled-textured nickel (001) tapes by pulsed-laser deposition. Epitaxial growth of oxide buffer layers directly on biaxially textured nickel, formed by recrystallization of cold-rolled pure nickel, made possible the growth of YBCO films 1.5 micrometers thick with superconducting properties that are comparable to those observed for epitaxial films on single-crystal oxide substrates. This result represents a viable approach for the production of long superconducting tapes for high-current, high-field applications at 77 kelvin.

Strong isotropic flux pinning in solution-derived YBa2Cu3O7-x nanocomposite superconductor films.

Abstract: Strong isotropic flux pinning in solution-derived YBa 2 Cu 3 O 7− x nanocomposite superconductor films

Flame aerosol synthesis of smart nanostructured materials

Abstract: Recent advances in aerosol and combustion science and engineering now allow scalable flame synthesis of mixed oxides, metal salts and even pure metals in the form of nanoparticles and films with closely controlled characteristics. In this way, high purity materials with novel metastable phases are made that are not accessible by conventional wet-phase and solid state processes. Here, flame processes are classified into vapour-fed and liquid-fed ones depending on the employed state of the metal precursor. Liquid-fed flame processes are distinguished for their flexibility in producing materials of various compositions and morphologies that result in unique product functionalities. Parameters controlling the characteristics of flame-made particles and films are summarized and selected classes of materials are reviewed focusing on catalysts, sensors, biomaterials (orthopaedic, dental or nutritional), electroceramics (fuel cells, batteries) and phosphors exhibiting superior performance over conventionally made ones. Just a few years ago it seemed impossible to make these materials in the gas phase. Finally, health effects of such particles are discussed while future challenges and opportunities for flame-made materials are highlighted.