Peng Chen

Bio: Peng Chen is an academic researcher from Northwest A&F University. The author has contributed to research in topics: Escherichia coli. The author has an hindex of 1, co-authored 1 publications receiving 64 citations.

High-throughput microfluidic system for long-term bacterial colony monitoring and antibiotic testing in zero-flow environments.

Abstract: In this study, a high-throughput microfluidic system is presented. The system is comprised of seven parallel channels. Each channel contains 32 square-shaped microchambers. After simulation studies on samples loaded into the microchambers, and the solute exchange between the microchambers and channels, the long-term culture of Escherichia coli (E. coli) HB101 in the microchambers is realized. Using the principle that l -arabinose ( l -Ara) can induce recombinant E. coli HB101 pGLO to synthesize green fluorescent protein (GFP), the real-time analysis of GFP expression in different initial bacterial densities is performed. The results demonstrate that higher initial loading densities of the bacterial colony cause bacterial cell to enter log-phase proliferation sooner. High or low initial loading densities of the bacterial cell suspension induce the same maximum growth rates during the log-phase. Quantitative on-chip analysis of tetracycline and erythromycin inhibition on bacterial cell growth is also conducted. Bacterial morphology changes during antibiotic treatment are observed. The results show that tetracycline and erythromycin exhibit different inhibition activities in E. coli cells. Concentrations of 3 μg/mL tetracycline can facilitate the formation of long filamentous bacteria with the average length of more than 50 μm. This study provides an on-chip framework for bacteriological research in a high-throughput manner and the development of recombinant bacteria-based biosensors for the detection of specific substances.

Advances in microfluidic materials, functions, integration, and applications.

Abstract: Microfluidics consist of microfabricated structures for liquid handling, with cross-sections in the 1–500 μm range, and small volume capacity (fL-nL) Capillary tubes connected with fittings,1 although utilizing small volumes, are not considered microfluidics for the purposes of this paper since they are not microfabricated Likewise, millifluidic systems, made by conventional machining tools, are excluded due to their larger feature sizes (>500 μm) Though micromachined systems for gas chromatography were introduced in the 1970’s,2 the field of microfluidics did not gain much traction until the 1990’s3 Silicon and glass were the original materials used, but then the focus shifted to include polymer substrates, and in particular, polydimethylsiloxane (PDMS) Since then the field has grown to encompass a wide variety of materials and applications The successful demonstration of electrophoresis and electroosmotic pumping in a microfluidic device provided a nonmechanical method for both fluid control and separation4 Laser induced fluorescence (LIF) enabled sensitive detection of fluorophores or fluorescently labeled molecules The expanded availability of low-cost printing allowed for cheaper and quicker mask fabrication for use in soft lithography5 Commercial microfluidic systems are now available from Abbott, Agilent, Caliper, Dolomite, Micralyne, Microfluidic Chip Shop, Micrux Technologies and Waters, as a few prominent examples For a more thorough description of the history of microfluidics, we refer the reader to a number of comprehensive, specialized reviews,3, 6–11 as well as a more general 2006 review12 The field of microfluidics offers many advantages compared to carrying out processes through bulk solution chemistry, the first of which relates to a lesson taught to every first-year chemistry student Simply stated, diffusion is slow! Thus, the smaller the distance required for interaction, the faster it will be Smaller channel dimensions also lead to smaller sample volumes (fL-nL), which can reduce the amount of sample or reagents required for testing and analysis Reduced dimensions can also lead to portable devices to enable on-site testing (provided the associated hardware is similarly portable) Finally, integration of multiple processes (like labeling, purification, separation and detection) in a microfluidic device can be highly enabling for many applications Microelectromechanical systems (MEMS) contain integrated electrical and mechanical parts that create a sensor or system Applications of MEMS are ubiquitous, including automobiles, phones, video games and medical and biological sensors13 Micro-total analysis systems, also known as labs-on-a-chip, are the chemical analogue of MEMS, as integrated microfluidic devices that are capable of automating multiple processes relevant to laboratory sciences For example, a typical lab-on-a-chip system might selectively purify a complex mixture (through filtering, antibody capture, etc), then separate target components and detect them Microfluidic devices consist of a core of common components Areas defined by empty space, such as reservoirs (wells), chambers and microchannels, are central to microfluidic systems Positive features, created by areas of solid material, add increased functionality to a chip and can consist of membranes, monoliths, pneumatic controls, beams and pillars Given the ubiquitous nature of negative components, and microchannels in particular, we focus here on a few of their properties Microfluidic channels have small overall volumes, laminar flow and a large surface-to-volume ratio Dimensions of a typical separation channel in microchip electrophoresis (μCE) are: 50 μm width, 15 μm height and 5 cm length for a volume of 375 nL Flow in these devices is normally nonturbulent due to low Reynolds numbers For example, water flowing at 20°C in the above channel at 1 μL/min (222 cm/s) results in a Reynolds number of ~05, where <2000 is laminar flow Since flow is nonturbulent, mixing is normally diffusion-limited Small channel sizes also have a high surface-to-volume ratio, leading to different characteristics from what are commonly found in bulk volumes The material surface can be used to manipulate fluid movement (such as by electroosmotic flow, EOF) and surface interactions For a solution in contact with a charged surface, a double layer of charge is created as oppositely charged ions are attracted to the surface charges This electrical double layer consists of an inner rigid or Stern Layer and an outer diffuse layer An electrostatic potential known as the zeta potential is formed, with the magnitude of the potential decreasing as distance from the surface increases The electrical double layer is the basis for EOF, wherein an applied voltage causes the loosely bound diffuse layer to move towards an electrode, dragging the bulk solution along Charges on the exposed surface also exert a greater influence on the fluid in a channel as its size decreases Larger surface-to-volume ratios are more prone to nonspecific adsorption and surface fouling In particular, non-charged and hydrophobic microdevice surfaces can cause proteins in solution to denature and stick We focus our review on advances in microfluidic systems since 2008 In doing this, we occasionally must cover foundational work in microfluidics that is considerably less recent We do not focus on chemical synthesis applications of microfluidics although it is an expanding area, nor do we delve into lithography, device fabrication or production costs Our specific emphasis herein is on four areas within microfluidics: properties and applications of commonly used materials, basic functions, integration, and selected applications For each of these four topics we provide a concluding section on opportunities for future development, and at the end of this review, we offer general conclusions and prospective for future work in the field Due to the considerable scope of the field of microfluidics, we limit our discussion to selected examples from each area, but cite in-depth reviews for the reader to turn to for further information about specific topics We also refer the reader to recent comprehensive reviews on advances in lab-on-a-chip systems by Arora et al10 and Kovarik et al14

Microfluidics Expanding the Frontiers of Microbial Ecology

Abstract: Microfluidics has significantly contributed to the expansion of the frontiers of microbial ecology over the past decade by allowing researchers to observe the behaviors of microbes in highly controlled microenvironments, across scales from a single cell to mixed communities. Spatially and temporally varying distributions of organisms and chemical cues that mimic natural microbial habitats can now be established by exploiting physics at the micrometer scale and by incorporating structures with specific geometries and materials. In this article, we review applications of microfluidics that have resulted in insightful discoveries on fundamental aspects of microbial life, ranging from growth and sensing to cell-cell interactions and population dynamics. We anticipate that this flexible multidisciplinary technology will continue to facilitate discoveries regarding the ecology of microorganisms and help uncover strategies to control microbial processes such as biofilm formation and antibiotic resistance.

Microfluidics Expanding the Frontiers of Microbial Ecology

Abstract: Microfluidics has significantly contributed to the expansion of the frontiers of microbial ecology over the past decade by allowing researchers to observe the behaviors of microbes in highly controlled microenvironments, across scales from a single cell to mixed communities. Spatially and temporally varying distributions of organisms and chemical cues that mimic natural microbial habitats can now be established by exploiting physics at the micrometer scale and by incorporating structures with specific geometries and materials. In this article, we review applications of microfluidics that have resulted in insightful discoveries on fundamental aspects of microbial life, ranging from growth and sensing to cell-cell interactions and population dynamics. We anticipate that this flexible multidisciplinary technology will continue to facilitate discoveries regarding the ecology of microorganisms and help uncover strategies to control microbial processes such as biofilm formation and antibiotic resistance.

Microfluidic Approaches to Bacterial Biofilm Formation

Abstract: Bacterial biofilms—aggregations of bacterial cells and extracellular polymeric substrates (EPS)—are an important subject of research in the fields of biology and medical science. Under aquatic conditions, bacterial cells form biofilms as a mechanism for improving survival and dispersion. In this review, we discuss bacterial biofilm development as a structurally and dynamically complex biological system and propose microfluidic approaches for the study of bacterial biofilms. Biofilms develop through a series of steps as bacteria interact with their environment. Gene expression and environmental conditions, including surface properties, hydrodynamic conditions, quorum sensing signals, and the characteristics of the medium, can have positive or negative influences on bacterial biofilm formation. The influences of each factor and the combined effects of multiple factors may be addressed using microfluidic approaches, which provide a promising means for controlling the hydrodynamic conditions, establishing stable chemical gradients, performing measurement in a high-throughput manner, providing real-time monitoring, and providing in vivo-like in vitro culture devices. An increased understanding of biofilms derived from microfluidic approaches may be relevant to improving our understanding of the contributions of determinants to bacterial biofilm development.

A multiplexed microfluidic platform for rapid antibiotic susceptibility testing.

Abstract: Effective treatment of clinical infections is critically dependent on the ability to rapidly screen patient samples to identify antibiograms of infecting pathogens. Existing methods for antibiotic susceptibility testing suffer from several disadvantages, including long turnaround times, excess sample and reagent consumption, poor detection sensitivity, and limited combinatorial capabilities. Unfortunately, these factors preclude the timely administration of appropriate antibiotics, complicating management of infections and exacerbating the development of antibiotic resistance. Here, we seek to address these issues by developing a microfluidic platform that relies on fluorescence detection of bacteria that express green fluorescent protein for highly sensitive and rapid antibiotic susceptibility testing. This platform possesses several advantages compared to conventional methods: (1) analysis of antibiotic action in two to four hours, (2) enhanced detection sensitivity (≈ 1 cell), (3) minimal consumption of cell samples and antibiotic reagents (<6 µL), and (4) improved portability through the implementation of normally closed valves. We employed this platform to quantify the effects of four antibiotics (ampicillin, cefalexin, chloramphenicol, tetracycline) and their combinations on Escherichia coli. Within four hours, the susceptibility of bacteria to antibiotics can be determined by detecting variations in maxima of local fluorescence intensity over time. As expected, cell density is a major determinant of antibiotic efficacy. Our results also revealed that combinations of three or more antibiotics are not necessarily better for eradicating pathogens compared to pairs of antibiotics. Overall, this microfluidic based biosensor technology has the potential to provide rapid and precise guidance in clinical therapies by identifying the antibiograms of pathogens.