Peng Zhou

Bio: Peng Zhou is an academic researcher from Fudan University. The author has contributed to research in topics: Transistor & Graphene. The author has an hindex of 34, co-authored 167 publications receiving 4706 citations. Previous affiliations of Peng Zhou include Nanjing University & Seoul National University.

Two-dimensional materials for next-generation computing technologies.

Abstract: Rapid digital technology advancement has resulted in a tremendous increase in computing tasks imposing stringent energy efficiency and area efficiency requirements on next-generation computing. To meet the growing data-driven demand, in-memory computing and transistor-based computing have emerged as potent technologies for the implementation of matrix and logic computing. However, to fulfil the future computing requirements new materials are urgently needed to complement the existing Si complementary metal–oxide–semiconductor technology and new technologies must be developed to enable further diversification of electronics and their applications. The abundance and rich variety of electronic properties of two-dimensional materials have endowed them with the potential to enhance computing energy efficiency while enabling continued device downscaling to a feature size below 5 nm. In this Review, from the perspective of matrix and logic computing, we discuss the opportunities, progress and challenges of integrating two-dimensional materials with in-memory computing and transistor-based computing technologies. This Review discusses the recent progress and future prospects of two-dimensional materials for next-generation nanoelectronics.

A semi-floating gate memory based on van der Waals heterostructures for quasi-non-volatile applications.

Abstract: As conventional circuits based on field-effect transistors are approaching their physical limits due to quantum phenomena, semi-floating gate transistors have emerged as an alternative ultrafast and silicon-compatible technology. Here, we show a quasi-non-volatile memory featuring a semi-floating gate architecture with band-engineered van der Waals heterostructures. This two-dimensional semi-floating gate memory demonstrates 156 times longer refresh time with respect to that of dynamic random access memory and ultrahigh-speed writing operations on nanosecond timescales. The semi-floating gate architecture greatly enhances the writing operation performance and is approximately 106 times faster than other memories based on two-dimensional materials. The demonstrated characteristics suggest that the quasi-non-volatile memory has the potential to bridge the gap between volatile and non-volatile memory technologies and decrease the power consumption required for frequent refresh operations, enabling a high-speed and low-power random access memory.

ReS2-Based Field-Effect Transistors and Photodetectors

Abstract: Atomically thin 2D layered transition metal dichalcogenides (TMDs) have been extensively studied in recent years because of their appealing electrical and optical properties. Here, the fabrication of ReS2 field-effect transistors is reported via the encapsulation of ReS2 nanosheets in a high-κ Al2O3 dielectric environment. Low-temperature transport measurements allow to observe a direct metal-to-insulator transition originating from strong electron–electron interactions. Remarkably, the photodetectors based on ReS2 exhibit gate-tunable photoresponsivity up to 16.14 A W−1 and external quantum efficiency reaching 3168%, showing a competitive device performance to those reported in graphene, MoSe2, GaS, and GaSe-based photodetectors. This study unambiguously distinguishes ReS2 as a new candidate for future applications in electronics and optoelectronics.

Tunable Ambipolar Polarization-Sensitive Photodetectors Based on High-Anisotropy ReSe2 Nanosheets.

Abstract: Atomically thin 2D-layered transition-metal dichalcogenides have been studied extensively in recent years because of their intriguing physical properties and promising applications in nanoelectronic devices. Among them, ReSe2 is an emerging material that exhibits a stable distorted 1T phase and strong in-plane anisotropy due to its reduced crystal symmetry. Here, the anisotropic nature of ReSe2 is revealed by Raman spectroscopy under linearly polarized excitations in which different vibration modes exhibit pronounced periodic variations in intensity. Utilizing high-quality ReSe2 nanosheets, top-gate ReSe2 field-effect transistors were built that show an excellent on/off current ratio exceeding 107 and a well-developed current saturation in the current–voltage characteristics at room temperature. Importantly, the successful synthesis of ReSe2 directly onto hexagonal boron nitride substrates has effectively improved the electron motility over 500 times and the hole mobility over 100 times at low temperature...

Unipolar barrier photodetectors based on van der Waals heterostructures

Abstract: Unipolar barrier structures are used to suppress dark current in photodetectors by blocking majority carriers. Designing unipolar barriers with conventional materials is challenging due to the strict requirements of lattice and band matching. Two-dimensional materials have self-passivated surfaces and tunable band structures, and can thus be used to design unipolar barriers in which lattice mismatch and interface defects are avoided. Here, we show that band-engineered van der Waals heterostructures can be used to build visible and mid-wavelength infrared unipolar barrier photodetectors. Our nBn unipolar barrier photodetectors, which are based on a tungsten disulfide/hexagonal boron nitride/palladium diselenide heterostructure, exhibit a low dark current of 15 pA, a photocurrent of 20 μA and a detectivity of 2.7 × 1012 cm Hz1/2 W−1. Our pBp unipolar barrier photodetectors, which are based on a black phosphorus/molybdenum disulfide/graphene heterostructure, exhibit a room-temperature detectivity of 2.3 × 1010 cm Hz1/2 W−1 in the mid-wavelength infrared region under blackbody radiation. The pBp devices also show a dichroic ratio of 4.9 under blackbody radiation, and a response time of 23 μs under 2 μm laser illumination. Band-engineered van der Waals heterostructures that block dark current without suppressing photocurrent can be used to build detectors with high room-temperature detectivity for visible light and blackbody infrared light.

Metal–Oxide RRAM

Abstract: In this paper, recent progress of binary metal-oxide resistive switching random access memory (RRAM) is reviewed. The physical mechanism, material properties, and electrical characteristics of a variety of binary metal-oxide RRAM are discussed, with a focus on the use of RRAM for nonvolatile memory application. A review of recent development of large-scale RRAM arrays is given. Issues such as uniformity, endurance, retention, multibit operation, and scaling trends are discussed.

Laser-induced breakdown spectroscopy (LIBS), part II: review of instrumental and methodological approaches to material analysis and applications to different fields.

Abstract: The first part of this two-part review focused on the fundamental and diagnostics aspects of laser-induced plasmas, only touching briefly upon concepts such as sensitivity and detection limits and largely omitting any discussion of the vast panorama of the practical applications of the technique. Clearly a true LIBS community has emerged, which promises to quicken the pace of LIBS developments, applications, and implementations. With this second part, a more applied flavor is taken, and its intended goal is summarizing the current state-of-the-art of analytical LIBS, providing a contemporary snapshot of LIBS applications, and highlighting new directions in laser-induced breakdown spectroscopy, such as novel approaches, instrumental developments, and advanced use of chemometric tools. More specifically, we discuss instrumental and analytical approaches (e.g., double- and multi-pulse LIBS to improve the sensitivity), calibration-free approaches, hyphenated approaches in which techniques such as Raman and fluorescence are coupled with LIBS to increase sensitivity and information power, resonantly enhanced LIBS approaches, signal processing and optimization (e.g., signal-to-noise analysis), and finally applications. An attempt is made to provide an updated view of the role played by LIBS in the various fields, with emphasis on applications considered to be unique. We finally try to assess where LIBS is going as an analytical field, where in our opinion it should go, and what should still be done for consolidating the technique as a mature method of chemical analysis.

Metal oxides for optoelectronic applications

Abstract: Optical transparency, tunable conducting properties and easy processability make metal oxides key materials for advanced optoelectronic devices. This Review discusses recent advances in the synthesis of these materials and their use in applications. Metal oxides (MOs) are the most abundant materials in the Earth's crust and are ingredients in traditional ceramics. MO semiconductors are strikingly different from conventional inorganic semiconductors such as silicon and III–V compounds with respect to materials design concepts, electronic structure, charge transport mechanisms, defect states, thin-film processing and optoelectronic properties, thereby enabling both conventional and completely new functions. Recently, remarkable advances in MO semiconductors for electronics have been achieved, including the discovery and characterization of new transparent conducting oxides, realization of p-type along with traditional n-type MO semiconductors for transistors, p–n junctions and complementary circuits, formulations for printing MO electronics and, most importantly, commercialization of amorphous oxide semiconductors for flat panel displays. This Review surveys the uniqueness and universality of MOs versus other unconventional electronic materials in terms of materials chemistry and physics, electronic characteristics, thin-film fabrication strategies and selected applications in thin-film transistors, solar cells, diodes and memories.

Emerging memories: resistive switching mechanisms and current status.

Abstract: The resistance switching behaviour of several materials has recently attracted considerable attention for its application in non-volatile memory (NVM) devices, popularly described as resistive random access memories (RRAMs). RRAM is a type of NVM that uses a material(s) that changes the resistance when a voltage is applied. Resistive switching phenomena have been observed in many oxides: (i) binary transition metal oxides (TMOs), e.g. TiO(2), Cr(2)O(3), FeO(x) and NiO; (ii) perovskite-type complex TMOs that are variously functional, paraelectric, ferroelectric, multiferroic and magnetic, e.g. (Ba,Sr)TiO(3), Pb(Zr(x) Ti(1-x))O(3), BiFeO(3) and Pr(x)Ca(1-x)MnO(3); (iii) large band gap high-k dielectrics, e.g. Al(2)O(3) and Gd(2)O(3); (iv) graphene oxides. In the non-oxide category, higher chalcogenides are front runners, e.g. In(2)Se(3) and In(2)Te(3). Hence, the number of materials showing this technologically interesting behaviour for information storage is enormous. Resistive switching in these materials can form the basis for the next generation of NVM, i.e. RRAM, when current semiconductor memory technology reaches its limit in terms of density. RRAMs may be the high-density and low-cost NVMs of the future. A review on this topic is of importance to focus concentration on the most promising materials to accelerate application into the semiconductor industry. This review is a small effort to realize the ambitious goal of RRAMs. Its basic focus is on resistive switching in various materials with particular emphasis on binary TMOs. It also addresses the current understanding of resistive switching behaviour. Moreover, a brief comparison between RRAMs and memristors is included. The review ends with the current status of RRAMs in terms of stability, scalability and switching speed, which are three important aspects of integration onto semiconductors.