scispace - formally typeset
Search or ask a question
Author

Per-Simon Kildal

Bio: Per-Simon Kildal is an academic researcher from Chalmers University of Technology. The author has contributed to research in topics: Antenna (radio) & Electromagnetic reverberation chamber. The author has an hindex of 60, co-authored 504 publications receiving 13470 citations. Previous affiliations of Per-Simon Kildal include SP Technical Research Institute of Sweden & Norwegian Institute of Technology.


Papers
More filters
Journal ArticleDOI
TL;DR: The ridge gap waveguide as mentioned in this paper is a metamaterial-based waveguide that can be realized in a narrow gap between two parallel metal plates by using a texture or multilayer structure on one of the surfaces.
Abstract: This letter presents a new metamaterial-based waveguide technology referred to as ridge gap waveguides. The main advantages of the ridge gap waveguides compared to hollow waveguides are that they are planar and much cheaper to manufacture, in particular at high frequencies such as for millimeter and sub- millimeter waves. The latter is due to the fact that there are no mechanical joints across which electric currents must float. The gap waveguides have lower losses than microstrip lines, and they are completely shielded by metal so no additional packaging is needed, in contrast to the severe packaging problems associated with microstrip circuits. The gap waveguides are realized in a narrow gap between two parallel metal plates by using a texture or multilayer structure on one of the surfaces. The waves follow metal ridges in the textured surface. All wave propagation in other directions is prohibited (in cutoff) by realizing a high surface impedance (ideally a perfect magnetic conductor) in the textured surface at both sides of all ridges. Thereby, cavity resonances do not appear either within the band of operation. The present letter introduces the gap waveguide and presents some initial simulated results.

738 citations

Journal ArticleDOI
TL;DR: In this paper, the concept of soft and hard surfaces is treated in detail, considering different geometries, and it is shown that both the hard and soft boundaries have the advantage of a polarizationindependent reflection coefficient for geometrical optics ray fields, so that a circularly polarized wave is circularly polarization in the same sense after reflection.
Abstract: A transversely corrugated surface as used in corrugated horn antennas represents a soft boundary. A hard boundary is made by using longitudinal corrugations filled with dielectric material. The concept of soft and hard surfaces is treated in detail, considering different geometries. It is shown that both the hard and soft boundaries have the advantage of a polarization-independent reflection coefficient for geometrical optics ray fields, so that a circularly polarized wave is circularly polarized in the same sense after reflection. The hard boundary can be used to obtain strong radiation fields along a surface for any polarization, whereas the soft boundary makes the fields radiated along the surface zero. >

677 citations

Journal ArticleDOI
TL;DR: This work explains how MIMO and diversity antennas with mutual coupling can be analyzed by classical embedded element patterns that can be computed by standard computer codes and how the radiation efficiency, diversity gain, correlation, and channel capacity can be measured in a reverberation chamber.
Abstract: MIMO systems are characterized by their maximum available capacity, which is reduced if there is correlation between the signals on different channels. The correlation is primarily caused by mutual coupling between the elements of the antenna arrays on both the receiving and transmitting sides. Similarly, diversity antennas can be characterized by a diversity gain that also is affected by mutual coupling between the antennas. We explain how such MIMO and diversity antennas with mutual coupling can be analyzed by classical embedded element patterns that can be computed by standard computer codes. In the MIMO example under investigation, the mutual coupling reduces both correlation, which increases the capacity, and radiation efficiency, which decreases it, and the combined effect is a net capacity reduction. We also explain how the radiation efficiency, diversity gain, correlation, and channel capacity can be measured in a reverberation chamber. The measurements show good agreement with simulations.

588 citations

Journal ArticleDOI
TL;DR: In this paper, the ridge gap waveguide is used to verify the large bandwidth and low losses of the quasi-transverse electromagnetic (TEM) mode propagating along the guiding ridge.
Abstract: This study describes the design and experimental verification of the ridge gap waveguide, appearing in the gap between parallel metal plates. One of the plates has a texture in the form of a wave-guiding metal ridge surrounded by metal posts. The latter posts, referred to as a pin surface or bed of nails, are designed to give a stopband for the normal parallel-plate modes between 10 and 23 GHz. The hardware demonstrator includes two 90 bends and two capacitive coupled coaxial transitions enabling measurements with a vector network analyser (VNA). The measured results verify the large bandwidth and low losses of the quasi-transverse electromagnetic (TEM) mode propagating along the guiding ridge, and that 90 bends can be designed in the same way as for microstrip lines. The demonstrator is designed for use around 15 GHz. Still, the ridge gap waveguide is more advantageous for frequencies above 30 GHz, because it can be realised entirely from metal using milling or moulding, and there are no requirements for conducting joints between the two plates that otherwise is a problem when realising conventional hollow waveguides.

377 citations

Journal ArticleDOI
04 Apr 2005
TL;DR: In this article, a six-monopole circular antenna array for use in a MIMO system is considered and the authors show how to calculate the embedded element patterns, both by classical analytical modeling and by the method of moments.
Abstract: A six-monopole circular antenna array for use in a MIMO system is considered. The authors show how to calculate the embedded element patterns, both by classical analytical modeling and by the method of moments. Thereafter, these are used to calculate the radiation efficiency of each embedded element, correlation and diversity gain, as well as the maximum average capacity of the MIMO system when the array is located in a rich scattering environment. The theoretical value for the capacity is obtained by numerically distributing many plane wave sources statistically uniformly over 4/spl pi/, letting them illuminate the calculated embedded element pattern and using Shannon's capacity formula on the received wave amplitudes. The calculated results are compared with measurement in a reverberation chamber, representing a similar scattering environment. The agreement is good.

353 citations


Cited by
More filters
Journal ArticleDOI
TL;DR: In this paper, a new type of metallic structure has been developed that is characterized by having high surface impedance, which is analogous to a corrugated metal surface in which the corrugations have been folded up into lumped-circuit elements and distributed in a two-dimensional lattice.
Abstract: A new type of metallic electromagnetic structure has been developed that is characterized by having high surface impedance. Although it is made of continuous metal, and conducts dc currents, it does not conduct ac currents within a forbidden frequency band. Unlike normal conductors, this new surface does not support propagating surface waves, and its image currents are not phase reversed. The geometry is analogous to a corrugated metal surface in which the corrugations have been folded up into lumped-circuit elements, and distributed in a two-dimensional lattice. The surface can be described using solid-state band theory concepts, even though the periodicity is much less than the free-space wavelength. This unique material is applicable to a variety of electromagnetic problems, including new kinds of low-profile antennas.

4,264 citations

Journal ArticleDOI
TL;DR: Herschel was launched on 14 May 2009, and is now an operational ESA space observatory o ering unprecedented observational capabilities in the far-infrared and sub-millimetre spectral range 55 671 m.
Abstract: Herschel was launched on 14 May 2009, and is now an operational ESA space observatory o ering unprecedented observational capabilities in the far-infrared and submillimetre spectral range 55 671 m. Herschel carries a 3.5 metre diameter passively cooled Cassegrain telescope, which is the largest of its kind and utilises a novel silicon carbide technology. The science payload comprises three instruments: two direct detection cameras/medium resolution spectrometers, PACS and SPIRE, and a very high-resolution heterodyne spectrometer, HIFI, whose focal plane units are housed inside a superfluid helium cryostat. Herschel is an observatory facility operated in partnership among ESA, the instrument consortia, and NASA. The mission lifetime is determined by the cryostat hold time. Nominally approximately 20,000 hours will be available for astronomy, 32% is guaranteed time and the remainder is open to the worldwide general astronomical community through a standard competitive proposal procedure.

3,359 citations

Proceedings Article
01 Jan 1999
TL;DR: In this paper, the authors describe photonic crystals as the analogy between electron waves in crystals and the light waves in artificial periodic dielectric structures, and the interest in periodic structures has been stimulated by the fast development of semiconductor technology that now allows the fabrication of artificial structures, whose period is comparable with the wavelength of light in the visible and infrared ranges.
Abstract: The term photonic crystals appears because of the analogy between electron waves in crystals and the light waves in artificial periodic dielectric structures. During the recent years the investigation of one-, two-and three-dimensional periodic structures has attracted a widespread attention of the world optics community because of great potentiality of such structures in advanced applied optical fields. The interest in periodic structures has been stimulated by the fast development of semiconductor technology that now allows the fabrication of artificial structures, whose period is comparable with the wavelength of light in the visible and infrared ranges.

2,722 citations

Journal ArticleDOI
TL;DR: The potential of transformation optics to create functionalities in which the optical properties can be designed almost at will is reviewed, which can be used to engineer various optical illusion effects, such as the invisibility cloak.
Abstract: Transformation optics describes the capability to design the path of light waves almost at will through the use of metamaterials that control effective materials properties on a subwavelength scale. In this review, the physics and applications of transformation optics are discussed.

1,085 citations

Journal ArticleDOI
TL;DR: The 2017 roadmap of terahertz frequency electromagnetic radiation (100 GHz-30 THz) as discussed by the authors provides a snapshot of the present state of THz science and technology in 2017, and provides an opinion on the challenges and opportunities that the future holds.
Abstract: Science and technologies based on terahertz frequency electromagnetic radiation (100 GHz–30 THz) have developed rapidly over the last 30 years. For most of the 20th Century, terahertz radiation, then referred to as sub-millimeter wave or far-infrared radiation, was mainly utilized by astronomers and some spectroscopists. Following the development of laser based terahertz time-domain spectroscopy in the 1980s and 1990s the field of THz science and technology expanded rapidly, to the extent that it now touches many areas from fundamental science to 'real world' applications. For example THz radiation is being used to optimize materials for new solar cells, and may also be a key technology for the next generation of airport security scanners. While the field was emerging it was possible to keep track of all new developments, however now the field has grown so much that it is increasingly difficult to follow the diverse range of new discoveries and applications that are appearing. At this point in time, when the field of THz science and technology is moving from an emerging to a more established and interdisciplinary field, it is apt to present a roadmap to help identify the breadth and future directions of the field. The aim of this roadmap is to present a snapshot of the present state of THz science and technology in 2017, and provide an opinion on the challenges and opportunities that the future holds. To be able to achieve this aim, we have invited a group of international experts to write 18 sections that cover most of the key areas of THz science and technology. We hope that The 2017 Roadmap on THz science and technology will prove to be a useful resource by providing a wide ranging introduction to the capabilities of THz radiation for those outside or just entering the field as well as providing perspective and breadth for those who are well established. We also feel that this review should serve as a useful guide for government and funding agencies.

1,068 citations