scispace - formally typeset
Search or ask a question
Author

Per-Simon Kildal

Bio: Per-Simon Kildal is an academic researcher from Chalmers University of Technology. The author has contributed to research in topics: Antenna (radio) & Electromagnetic reverberation chamber. The author has an hindex of 60, co-authored 504 publications receiving 13470 citations. Previous affiliations of Per-Simon Kildal include SP Technical Research Institute of Sweden & Norwegian Institute of Technology.


Papers
More filters
Proceedings ArticleDOI
10 Apr 2016
TL;DR: Simulation of near-field plane wave synthesis by a planar array with focus on minimization of reference signal errors within the test zone for Random Line-Of-Sight Over-The-Air characterization of wireless devices on cars is presented.
Abstract: We present simulations of near-field plane wave synthesis by a planar array. The focus is on minimization of reference signal errors within the test zone for Random Line-Of-Sight Over-The-Air characterization of wireless devices on cars. The analysis considers the output of the ideal digital threshold receiver model of the device under test as a Probability of Detection curve. The dimensions, the interelement spacings and the number of elements in a planar array comprising Huygens sources are investigated to produce an absolute error less than 0.5 dB.

14 citations

Journal ArticleDOI
TL;DR: In this article, the embedded element patterns of two parallel half-wavelength dipoles are calculated for various source impedances and dipole spacings by using classical formulas for self and mutual impedances.
Abstract: The embedded element patterns of two parallel half-wavelength dipoles are calculated for various source impedances and dipole spacings by using classical formulas for self and mutual impedances. These are used to calculate the effective diversity gain, which is shown to vary with source impedances and dipole spacing. The results are verified using a method of moments (MoM) code for wire antennas and via measurements in a reverberation chamber. The numerical model is used to find the source impedances that maximize the effective diversity gain, which has a maximum for the computed cases when the source impedances are conjugate-matched to the input impedances of each of the embedded dipole elements. Then the two antenna ports are uncorrelated. © 2006 Wiley Periodicals, Inc. Microwave Opt Technol Lett 48: 532–535, 2006; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.21400

14 citations

Journal ArticleDOI
TL;DR: In this article, the authors proposed a PEC/PMC strip grid model for soft and hard surfaces and applied it to bodies of revolution (BOR) such as soft horns with transverse corrugations and hard horns with longitudinal corrugation.
Abstract: Strip-loaded surfaces and corrugated surfaces can be efficiently analysed using asymptotic boundary conditions that are valid in the limit of vanishing strip and corrugation period, respectively. An even simpler boundary condition is obtained by assuming that the surfaces are ideally soft or hard. This corresponds to a curvilinear grid of quasi-parallel perfect electric conducting (PEC) and perfect magnetic conducting (PMC) strips of incremental width and period, referred to as a PEC/PMC strip grid. Such a simple model for soft/hard surfaces speeds up the design process and provides the proper object parameters under the ideal soft or hard conditions. After reaching the designed characteristics, one can study the bandwidth of realisations of the surface using the asymptotic boundary conditions and finally make a complete and detailed study of all characteristics of the realisations by including even the finite period of the strips and corrugations. The ideal PEC/PMC strip model is used here as an example applied to bodies of revolution (BOR) such as soft horns with transverse corrugations and hard horns with longitudinal corrugations. The longitudinally corrugated horn is not a BOR, but both the asymptotic boundary condition and the ideal PEC/PMC strip model make it possible to analyse it as a BOR with an anisotropic wall and this reduces the computer time enormously compared to a full wave analysis for a finite corrugation period. It is shown that the PEC/PMC strip grid can predict the radiation patterns well at the centre frequency, but the bandwidth cannot be determined.

14 citations

Proceedings ArticleDOI
10 Apr 2016
TL;DR: This paper deals with the design of low loss wideband power dividers based on groove gap waveguide (GGW) technology and shows that the gain and total radiation efficiency of the antenna are more than 32.5 dBi and 90% over the desired frequency range from 56 to 66.4 GHz.
Abstract: This paper deals with the design of low loss wideband power dividers based on groove gap waveguide (GGW) technology. The advantages of GGW power dividers are low insertion loss, high power handling capacities, ease of fabrication and compatibility with integrated microwave networks. A 64-way power divider is designed and used as the feeding network of a 16×16-element slot antenna array at 60-GHz band. The results show that the gain and total radiation efficiency of the antenna are more than 32.5 dBi and 90% over the desired frequency range from 56 to 66.4 GHz.

14 citations


Cited by
More filters
Journal ArticleDOI
TL;DR: In this paper, a new type of metallic structure has been developed that is characterized by having high surface impedance, which is analogous to a corrugated metal surface in which the corrugations have been folded up into lumped-circuit elements and distributed in a two-dimensional lattice.
Abstract: A new type of metallic electromagnetic structure has been developed that is characterized by having high surface impedance. Although it is made of continuous metal, and conducts dc currents, it does not conduct ac currents within a forbidden frequency band. Unlike normal conductors, this new surface does not support propagating surface waves, and its image currents are not phase reversed. The geometry is analogous to a corrugated metal surface in which the corrugations have been folded up into lumped-circuit elements, and distributed in a two-dimensional lattice. The surface can be described using solid-state band theory concepts, even though the periodicity is much less than the free-space wavelength. This unique material is applicable to a variety of electromagnetic problems, including new kinds of low-profile antennas.

4,264 citations

Journal ArticleDOI
TL;DR: Herschel was launched on 14 May 2009, and is now an operational ESA space observatory o ering unprecedented observational capabilities in the far-infrared and sub-millimetre spectral range 55 671 m.
Abstract: Herschel was launched on 14 May 2009, and is now an operational ESA space observatory o ering unprecedented observational capabilities in the far-infrared and submillimetre spectral range 55 671 m. Herschel carries a 3.5 metre diameter passively cooled Cassegrain telescope, which is the largest of its kind and utilises a novel silicon carbide technology. The science payload comprises three instruments: two direct detection cameras/medium resolution spectrometers, PACS and SPIRE, and a very high-resolution heterodyne spectrometer, HIFI, whose focal plane units are housed inside a superfluid helium cryostat. Herschel is an observatory facility operated in partnership among ESA, the instrument consortia, and NASA. The mission lifetime is determined by the cryostat hold time. Nominally approximately 20,000 hours will be available for astronomy, 32% is guaranteed time and the remainder is open to the worldwide general astronomical community through a standard competitive proposal procedure.

3,359 citations

Proceedings Article
01 Jan 1999
TL;DR: In this paper, the authors describe photonic crystals as the analogy between electron waves in crystals and the light waves in artificial periodic dielectric structures, and the interest in periodic structures has been stimulated by the fast development of semiconductor technology that now allows the fabrication of artificial structures, whose period is comparable with the wavelength of light in the visible and infrared ranges.
Abstract: The term photonic crystals appears because of the analogy between electron waves in crystals and the light waves in artificial periodic dielectric structures. During the recent years the investigation of one-, two-and three-dimensional periodic structures has attracted a widespread attention of the world optics community because of great potentiality of such structures in advanced applied optical fields. The interest in periodic structures has been stimulated by the fast development of semiconductor technology that now allows the fabrication of artificial structures, whose period is comparable with the wavelength of light in the visible and infrared ranges.

2,722 citations

Journal ArticleDOI
TL;DR: The potential of transformation optics to create functionalities in which the optical properties can be designed almost at will is reviewed, which can be used to engineer various optical illusion effects, such as the invisibility cloak.
Abstract: Transformation optics describes the capability to design the path of light waves almost at will through the use of metamaterials that control effective materials properties on a subwavelength scale. In this review, the physics and applications of transformation optics are discussed.

1,085 citations

Journal ArticleDOI
TL;DR: The 2017 roadmap of terahertz frequency electromagnetic radiation (100 GHz-30 THz) as discussed by the authors provides a snapshot of the present state of THz science and technology in 2017, and provides an opinion on the challenges and opportunities that the future holds.
Abstract: Science and technologies based on terahertz frequency electromagnetic radiation (100 GHz–30 THz) have developed rapidly over the last 30 years. For most of the 20th Century, terahertz radiation, then referred to as sub-millimeter wave or far-infrared radiation, was mainly utilized by astronomers and some spectroscopists. Following the development of laser based terahertz time-domain spectroscopy in the 1980s and 1990s the field of THz science and technology expanded rapidly, to the extent that it now touches many areas from fundamental science to 'real world' applications. For example THz radiation is being used to optimize materials for new solar cells, and may also be a key technology for the next generation of airport security scanners. While the field was emerging it was possible to keep track of all new developments, however now the field has grown so much that it is increasingly difficult to follow the diverse range of new discoveries and applications that are appearing. At this point in time, when the field of THz science and technology is moving from an emerging to a more established and interdisciplinary field, it is apt to present a roadmap to help identify the breadth and future directions of the field. The aim of this roadmap is to present a snapshot of the present state of THz science and technology in 2017, and provide an opinion on the challenges and opportunities that the future holds. To be able to achieve this aim, we have invited a group of international experts to write 18 sections that cover most of the key areas of THz science and technology. We hope that The 2017 Roadmap on THz science and technology will prove to be a useful resource by providing a wide ranging introduction to the capabilities of THz radiation for those outside or just entering the field as well as providing perspective and breadth for those who are well established. We also feel that this review should serve as a useful guide for government and funding agencies.

1,068 citations