Per-Simon Kildal

Bio: Per-Simon Kildal is an academic researcher from Chalmers University of Technology. The author has contributed to research in topics: Antenna (radio) & Electromagnetic reverberation chamber. The author has an hindex of 60, co-authored 504 publications receiving 13470 citations. Previous affiliations of Per-Simon Kildal include SP Technical Research Institute of Sweden & Norwegian Institute of Technology.

A study of three techniques used in the diffraction analysis of shaped dual-reflector antennas

Abstract: An examination is presented of three techniques used for the efficient computation of fields diffracted by a subreflector that has been shaped by geometrical optics synthesis. It is found that these techniques, which are based on the geometrical theory of diffraction (GTD), produce errors in the computed fields that are specific to shaped reflectors. These errors are examined for a reflector system shaped to produce maximum gain from a tapered feed illumination. The discrepancies are directly related to the caustic being located near an observation point of the GTD calculations. The errors found are localized, and they increase in magnitude as the caustic approaches the main reflector. In a general offset geometry, the location of the caustic may be located arbitrarily close to the main reflector given a prescribed output aperture distribution. For the specific case considered here-the common situation of shaping to produce maximum gain-the caustic is located near the edge of the main reflector and on the reflection shadow boundary. A local correction is derived which creates a uniform solution through the caustic and across the reflection shadow boundary. Away from this point the calculation recedes to the standard GTD solution. >

Feed Scattering in Primary-Fed Reflector Antennas

Abstract: This paper presents a method to improve the calculation of the directivity and the radiation pattern of a primary-fed reflector antenna, by including the contribution due to multiple reflections between the feed and the reflector. These multiple reflections are controlled by introducing a feed scattering pattern, which is the scattered field from the feed when illuminated by a plane wave. The method is applied to a reflector with a self-supported dipole-feed, showing good agreement with both the measurements and a moment method solution of the complete antenna including the feed as well as the paraboloidal reflector. The results show that the multiple reflections may have stronger effect on the directivity and the cross-polar sidelobe level than the centre blockage has.

Simple Boundary Condition for Canonical EBG Surface: PMC-Backed Uniaxial Medium

Abstract: A simple-to-use replacement model for isotropic electromagnetic bandgap (EBG) surfaces such as mushroom surfaces is investigated. Properties of EBG surfaces strongly depend on the incidence angle of the incoming plane wave. The suggested model takes this behavior into account and actually represents the ideal EBG surface. The model is based on uniaxial representation of a thin DB layer backed by a perfect magnetic conductor (PMC) plate. We investigate how this model behaves in comparison with a realistic mushroom surface, and when it can be applied. The results show that the proposed model can be used for both far field calculations and antenna coupling evaluation.

Uncertainties in estimating ergodic MIMO capacity and diversity gain of multiport antenna systems with different port weights

Abstract: The performance of multiport antenna systems located in multipath environment is characterized by their ergodic capacity and diversity gain. The impact on convergence and statistical uncertainties involved in the estimation and evaluation of these performance metrics is studied for different port weights (i.e. different embedded element efficiencies) and correlations. The study is performed by using an upgraded version of the multipath simulation tool Rayleigh Lab which emphasizes the presentation of the statistical characteristics on the ports rather than the electromagnetic modelling. Therefore, the Rayleigh fading channels are generated in a very simple way by using arrays of randomly distributed complex numbers, and the user can input efficiencies and correlations rather than farfield functions and mutual couplings.

MIMO LTE OTA measurements in reverberation chamber: Rich isotropic reference environment makes agreement with theoretical system model

Abstract: The reverberation chamber has during the last 10 years been developed into an accurate instrument for OTA measurements, having a well-defined rich isotropic multipath environment. This has been introduced as a new reference environment for testing of wireless devices, complementing the traditional anechoic reference environment. The rich isotropic multipath environment and the definition of an ideal error-correcting digital receiver have made it possible to develop simple theoretical models that predict the measured throughput data rate in a reverberation chamber versus received power within a few tenth of dBs The present paper overviews the developments of the reverberation chamber that has made it possible to achieve such agreement, as well as the on-going work of determining relevance of the rich isotropic environment compared to real-life environments.

High-impedance electromagnetic surfaces with a forbidden frequency band

Abstract: A new type of metallic electromagnetic structure has been developed that is characterized by having high surface impedance. Although it is made of continuous metal, and conducts dc currents, it does not conduct ac currents within a forbidden frequency band. Unlike normal conductors, this new surface does not support propagating surface waves, and its image currents are not phase reversed. The geometry is analogous to a corrugated metal surface in which the corrugations have been folded up into lumped-circuit elements, and distributed in a two-dimensional lattice. The surface can be described using solid-state band theory concepts, even though the periodicity is much less than the free-space wavelength. This unique material is applicable to a variety of electromagnetic problems, including new kinds of low-profile antennas.

Herschel Space Observatory - An ESA facility for far-infrared and submillimetre astronomy

Abstract: Herschel was launched on 14 May 2009, and is now an operational ESA space observatory o ering unprecedented observational capabilities in the far-infrared and submillimetre spectral range 55 671 m. Herschel carries a 3.5 metre diameter passively cooled Cassegrain telescope, which is the largest of its kind and utilises a novel silicon carbide technology. The science payload comprises three instruments: two direct detection cameras/medium resolution spectrometers, PACS and SPIRE, and a very high-resolution heterodyne spectrometer, HIFI, whose focal plane units are housed inside a superfluid helium cryostat. Herschel is an observatory facility operated in partnership among ESA, the instrument consortia, and NASA. The mission lifetime is determined by the cryostat hold time. Nominally approximately 20,000 hours will be available for astronomy, 32% is guaranteed time and the remainder is open to the worldwide general astronomical community through a standard competitive proposal procedure.

Photonic crystals

Abstract: The term photonic crystals appears because of the analogy between electron waves in crystals and the light waves in artificial periodic dielectric structures. During the recent years the investigation of one-, two-and three-dimensional periodic structures has attracted a widespread attention of the world optics community because of great potentiality of such structures in advanced applied optical fields. The interest in periodic structures has been stimulated by the fast development of semiconductor technology that now allows the fabrication of artificial structures, whose period is comparable with the wavelength of light in the visible and infrared ranges.

Transformation optics and metamaterials

Abstract: Transformation optics describes the capability to design the path of light waves almost at will through the use of metamaterials that control effective materials properties on a subwavelength scale. In this review, the physics and applications of transformation optics are discussed.

The 2017 terahertz science and technology roadmap

Abstract: Science and technologies based on terahertz frequency electromagnetic radiation (100 GHz–30 THz) have developed rapidly over the last 30 years. For most of the 20th Century, terahertz radiation, then referred to as sub-millimeter wave or far-infrared radiation, was mainly utilized by astronomers and some spectroscopists. Following the development of laser based terahertz time-domain spectroscopy in the 1980s and 1990s the field of THz science and technology expanded rapidly, to the extent that it now touches many areas from fundamental science to 'real world' applications. For example THz radiation is being used to optimize materials for new solar cells, and may also be a key technology for the next generation of airport security scanners. While the field was emerging it was possible to keep track of all new developments, however now the field has grown so much that it is increasingly difficult to follow the diverse range of new discoveries and applications that are appearing. At this point in time, when the field of THz science and technology is moving from an emerging to a more established and interdisciplinary field, it is apt to present a roadmap to help identify the breadth and future directions of the field. The aim of this roadmap is to present a snapshot of the present state of THz science and technology in 2017, and provide an opinion on the challenges and opportunities that the future holds. To be able to achieve this aim, we have invited a group of international experts to write 18 sections that cover most of the key areas of THz science and technology. We hope that The 2017 Roadmap on THz science and technology will prove to be a useful resource by providing a wide ranging introduction to the capabilities of THz radiation for those outside or just entering the field as well as providing perspective and breadth for those who are well established. We also feel that this review should serve as a useful guide for government and funding agencies.