scispace - formally typeset
Search or ask a question
Author

Peter E.D. Love

Bio: Peter E.D. Love is an academic researcher from Curtin University. The author has contributed to research in topics: Procurement & Rework. The author has an hindex of 90, co-authored 546 publications receiving 24815 citations. Previous affiliations of Peter E.D. Love include Kyung Hee University & Deakin University.


Papers
More filters
Journal ArticleDOI
TL;DR: In this article, the causes and costs of rework in two construction projects were analyzed and discussed, and it was shown that the cost of the rework for the case study projects was 3.15% and 2.2% respectively.
Abstract: Very few construction companies and consulting firms in Australia measure their costs of quality. Consequently, it is difficult for them to prove that systems for preventing quality failures are cost-effective. Although the direct costs of a quality system can be quantified with some accuracy (salaries, costs of documentation, audits, etc.), the corresponding benefits are far more difficult to assess. Indeed quality failures have become an endemic feature of the procurement process in construction and invariably lead to time and cost overruns in projects. Thus, in order to improve the performance of projects it is necessary to identify the causes and costs rework. The research presented in this paper quantifies the causes, magnitude and costs of rework experienced in two construction projects that were procured using different contractual arrangements. The causes and costs of rework projects are analysed and discussed. The findings reveal that the cost of rework for the case study projects was 3.15% and 2...

445 citations

Journal ArticleDOI
TL;DR: In this article, the influence of different project types and procurement methods on rework costs in construction projects was investigated and the direct and indirect consequences of rework were analyzed and discussed, and it was found that rework contributed to 52% of a project's cost growth and 26% of the variance in cost growth was attributable to changes due to direct rework.
Abstract: While it is widely recognized that additional costs due to rework can have an adverse effect on project performance, limited empirical research has been done to investigate the influencing factors. The research presented in this paper aims to determine the influence of different project types and procurement methods on rework costs in construction projects. Using a questionnaire survey, rework costs were obtained from 161 Australian construction projects. The direct and indirect consequences of rework are analyzed and discussed. It is shown that, contrary to expectation, rework costs do not differ relative to project type or procurement method. In addition, it was found rework contributed to 52% of a project's cost growth and that 26% of the variance in cost growth was attributable to changes due to direct rework. To reduce rework costs and therefore improve project performance, it is posited that construction organizations begin to consider and measure them, so that an understanding of their magnitude can be captured, root causes identified, and effective prevention strategies implemented.

442 citations

Journal ArticleDOI
TL;DR: In this paper, a case study research strategy was used to examine the technology management experiences of a leading U.K. manufacturing organization during its adoption of a vendor-supplied Manufacturing Resource Planning (MRPII) information system.
Abstract: The management of Information Technology (IT) and Information Systems (IS) is considered a complex exercise by academics and practitioners alike. The reason for this is that there are ubiquitous portfolios of tangible and intangible benefits that are offered to an organization following the adoption of IT/IS that, in turn, all need managing to ensure realization. Organizations also have to take into account the direct and often larger indirect costs that are typically associated with IT/IS deployments. To provide managers with a critical insight into the management of new technology, this paper uses a case study research strategy to examine the technology management experiences of a leading U.K. manufacturing organization during its adoption of a vendor-supplied Manufacturing Resource Planning (MRPII) information system. Following the lack of attention given to human and organizational technology management factors while implementing MRPII, the vendor-based information system was later abandoned and deemed a failure. In addressing those technology management factors that were later identified as important, it was found that key employees were able to overcome a number of organizational barriers and develop and implement a bespoke MRPII system that significantly improved the organization's competitive position. Technology management taxonomies that contributed to the failure and later successful implementation of MRPII are identified and discussed. The organization's experiences in solving the problems associated with the implementation of their IS offers a learning opportunity for those companies that are seeking a competitive advantage through technology management.

338 citations

Journal ArticleDOI
TL;DR: In this article, a survey of 41 clients and 35 consultants was carried out to obtain experience of and attitudes to a variety of procurement methods and the criteria used for selection, finding that a simple set of the criteria generally is adequate and sufficient for procurement path selection, and that there is a reasonable consensus on the appropriate...
Abstract: Building procurement has become a fashionable term with industry practitioners and researchers. It determines the overall framework and structure of responsibilities and authorities for participants within the building process. It is a key factor contributing to overall client satisfaction and project success. The selection of the most suitable procurement method consequently is critical for both clients and project participants, and is becoming an important and contemporary issue within the building industry. The problem, nevertheless, lies in the fact that there has been limited empirical research in this field of study. Postal questionnaire surveys of 41 clients and 35 consultants were carried out, and were used to obtain experience of and attitudes to a variety of procurement methods and the criteria used for selection. The findings indicate that a simple set of the criteria generally is adequate and sufficient for procurement path selection, and that there is a reasonable consensus on the appropriate...

319 citations

Journal ArticleDOI
TL;DR: An initial conceptual framework for public sector information systems evaluation is proposed, which is then empirically explored within two local government authorities and emphasizes the importance of situated, interpretive user assessments in evaluating e‐government investments.
Abstract: . Part of the remit of public sector management includes planning and reflecting on capital expenditure on new technology. With this in mind, the role that information systems play in supporting improvements in e-government service delivery to stakeholder groups continues to attract much attention. The authors of this paper seek to define the scope and role that information systems evaluation plays within the public sector. In particular, the authors assess whether public sector organizations might benefit from the use of established ex-ante evaluation techniques, when applied to analyse the impact of e-government information systems. Following a comprehensive review of the normative literature, an initial conceptual framework for public sector information systems evaluation is proposed, which is then empirically explored within two local government authorities. The conceptual framework is then revised by using the structured case approach, which is dependent on an iterative research cycle where triangulated data are elicited. This then supports the emergence of new concepts during each research cycle that leads to the view that information systems evaluation in the public sector is a process of experiential and subjective judgement, which is grounded in opinion and world views. This leads the authors to challenge the appropriateness of traditional modes of investment appraisal when applied in the public sector. The finalized framework embraces investment decisions, evaluation methods, culture and structure, as well as post hoc evaluation. It emphasizes the importance of situated, interpretive user assessments in evaluating e-government investments.

308 citations


Cited by
More filters
Posted Content
TL;DR: Deming's theory of management based on the 14 Points for Management is described in Out of the Crisis, originally published in 1982 as mentioned in this paper, where he explains the principles of management transformation and how to apply them.
Abstract: According to W. Edwards Deming, American companies require nothing less than a transformation of management style and of governmental relations with industry. In Out of the Crisis, originally published in 1982, Deming offers a theory of management based on his famous 14 Points for Management. Management's failure to plan for the future, he claims, brings about loss of market, which brings about loss of jobs. Management must be judged not only by the quarterly dividend, but by innovative plans to stay in business, protect investment, ensure future dividends, and provide more jobs through improved product and service. In simple, direct language, he explains the principles of management transformation and how to apply them.

9,241 citations

Book
01 Jan 1995
TL;DR: In this article, Nonaka and Takeuchi argue that Japanese firms are successful precisely because they are innovative, because they create new knowledge and use it to produce successful products and technologies, and they reveal how Japanese companies translate tacit to explicit knowledge.
Abstract: How has Japan become a major economic power, a world leader in the automotive and electronics industries? What is the secret of their success? The consensus has been that, though the Japanese are not particularly innovative, they are exceptionally skilful at imitation, at improving products that already exist. But now two leading Japanese business experts, Ikujiro Nonaka and Hiro Takeuchi, turn this conventional wisdom on its head: Japanese firms are successful, they contend, precisely because they are innovative, because they create new knowledge and use it to produce successful products and technologies. Examining case studies drawn from such firms as Honda, Canon, Matsushita, NEC, 3M, GE, and the U.S. Marines, this book reveals how Japanese companies translate tacit to explicit knowledge and use it to produce new processes, products, and services.

7,448 citations

Journal Article
TL;DR: In this article, the authors present a document, redatto, voted and pubblicato by the Ipcc -Comitato intergovernativo sui cambiamenti climatici - illustra la sintesi delle ricerche svolte su questo tema rilevante.
Abstract: Cause, conseguenze e strategie di mitigazione Proponiamo il primo di una serie di articoli in cui affronteremo l’attuale problema dei mutamenti climatici. Presentiamo il documento redatto, votato e pubblicato dall’Ipcc - Comitato intergovernativo sui cambiamenti climatici - che illustra la sintesi delle ricerche svolte su questo tema rilevante.

4,187 citations

Journal ArticleDOI
TL;DR: A comprehensive review of the main 3D printing methods, materials and their development in trending applications was carried out in this paper, where the revolutionary applications of AM in biomedical, aerospace, buildings and protective structures were discussed.
Abstract: Freedom of design, mass customisation, waste minimisation and the ability to manufacture complex structures, as well as fast prototyping, are the main benefits of additive manufacturing (AM) or 3D printing. A comprehensive review of the main 3D printing methods, materials and their development in trending applications was carried out. In particular, the revolutionary applications of AM in biomedical, aerospace, buildings and protective structures were discussed. The current state of materials development, including metal alloys, polymer composites, ceramics and concrete, was presented. In addition, this paper discussed the main processing challenges with void formation, anisotropic behaviour, the limitation of computer design and layer-by-layer appearance. Overall, this paper gives an overview of 3D printing, including a survey on its benefits and drawbacks as a benchmark for future research and development.

4,159 citations