Philip St. J. Russell

Bio: Philip St. J. Russell is an academic researcher from Max Planck Society. The author has contributed to research in topics: Photonic-crystal fiber & Photonic crystal. The author has an hindex of 47, co-authored 356 publications receiving 16560 citations. Previous affiliations of Philip St. J. Russell include University of Southampton & University of Erlangen-Nuremberg.

Electromagnetically-induced transparency and saturable absorption in all-fiber devices based on acetylene-filled hollow-core PCF

Abstract: We report on the development of all-fiber devices based on a hermetically sealed hollow-core-PCF filled with acetylene at sub-millibar pressure and designed for the generation of electromagnetically-induced transparency and for saturable absorption.

Stable Immobilization of Size‐Controlled Bimetallic Nanoparticles in Photonic Crystal Fiber Microreactor

Abstract: 1Technische Universität Darmstadt, Ernst-Berl-Institut für Technische und Makromolekulare Chemie, 64287 Darmstadt, Germany; 2Max-Planck Institute for the Science of Light, Guenther-Scharowsky-Str. 1/Bldg. 24, 91058 Erlangen, Germany; 3NanoPhotonics Centre, Cavendish Laboratory, University of Cambridge, J. J. Thomson Avenue, Cambridge CB3 0HE, United Kingdom; 4Lehrstuhl für Chemische Reaktionstechnik, University of Erlangen-Nuremberg, 91058 Erlangen, Germany;

Up-tapering of Optical Fibers Using a Conventional Flame Tapering Rig

Abstract: We demonstrate the fabrication of low-loss up-tapers in SMF-28 using a conventional tapering rig. Waist diameters of 240 mum, uniform over several cm, have been produced. The technique also works for photonic crystal fibers.

High-brightness seven-octave carrier envelope phase-stable light source

Abstract: High-brightness sources of coherent and few-cycle-duration light waveforms with spectral coverage from the UV to the THz would offer unprecedented versatility and opportunities for a spectacular range of applications from bio-chemical sensing, to time-resolved and nonlinear spectroscopy, to attosecond light-wave electronics. Combinations of various sources with frequency conversion and supercontinuum generation can provide relatively large spectral coverage, but many applications require much broader spectral range and low-jitter synchronization for time-domain measurements. Here, we present a carrier-envelope-phase stable light source, seeded by a mid-IR frequency comb, with simultaneous spectral coverage across 7 optical octaves, from the UV (340 nm) into the THz (40,000 nm). Combining soliton self-compression and dispersive wave generation in an anti-resonant-reflection photonic crystal fibre with intra-pulse difference frequency generation in BaGa2GeSe6, the spectral brightness is 2-5 orders of magnitude above synchrotron sources. This enables high-dynamic-range spectroscopies and provides enticing prospects for attosecond physics and material sciences.

Tumbling and anomalous alignment of optically levitated anisotropic microparticles in chiral hollow-core photonic crystal fiber.

Abstract: The complex tumbling motion of spinning nonspherical objects is a topic of enduring interest, both in popular culture and in advanced scientific research. Here, we report all-optical control of the spin, precession, and nutation of vaterite microparticles levitated by counterpropagating circularly polarized laser beams guided in chiral hollow-core fiber. The circularly polarized light causes the anisotropic particles to spin about the fiber axis, while, regulated by minimization of free energy, dipole forces tend to align the extraordinary optical axis of positive uniaxial particles into the plane of rotating electric field. The end result is that, accompanied by oscillatory nutation, the optical axis reaches a stable tilt angle with respect to the plane of the electric field. The results reveal new possibilities for manipulating optical alignment through rotational degrees of freedom, with applications in the control of micromotors and microgyroscopes, laser alignment of polyatomic molecules, and study of rotational cell mechanics.

Cavity Optomechanics

Abstract: We review the field of cavity optomechanics, which explores the interaction between electromagnetic radiation and nano- or micromechanical motion This review covers the basics of optical cavities and mechanical resonators, their mutual optomechanical interaction mediated by the radiation pressure force, the large variety of experimental systems which exhibit this interaction, optical measurements of mechanical motion, dynamical backaction amplification and cooling, nonlinear dynamics, multimode optomechanics, and proposals for future cavity quantum optomechanics experiments In addition, we describe the perspectives for fundamental quantum physics and for possible applications of optomechanical devices

Photonic crystal fibers

Abstract: Photonic crystal fibers guide light by corralling it within a periodic array of microscopic air holes that run along the entire fiber length Largely through their ability to overcome the limitations of conventional fiber optics—for example, by permitting low-loss guidance of light in a hollow core—these fibers are proving to have a multitude of important technological and scientific applications spanning many disciplines The result has been a renaissance of interest in optical fibers and their uses

Fourier-transform method of fringe-pattern analysis for computer-based topography and interferometry

Abstract: A fast-Fourier-transform method of topography and interferometry is proposed. By computer processing of a noncontour type of fringe pattern, automatic discrimination is achieved between elevation and depression of the object or wave-front form, which has not been possible by the fringe-contour-generation techniques. The method has advantages over moire topography and conventional fringe-contour interferometry in both accuracy and sensitivity. Unlike fringe-scanning techniques, the method is easy to apply because it uses no moving components.

Fiber grating sensors

Abstract: We review the recent developments in the area of optical fiber grating sensors, including quasi-distributed strain sensing using Bragg gratings, systems based on chirped gratings, intragrating sensing concepts, long period-based grating sensors, fiber grating laser-based systems, and interferometric sensor systems based on grating reflectors.

Supercontinuum generation in photonic crystal fiber

Abstract: A topical review of numerical and experimental studies of supercontinuum generation in photonic crystal fiber is presented over the full range of experimentally reported parameters, from the femtosecond to the continuous-wave regime. Results from numerical simulations are used to discuss the temporal and spectral characteristics of the supercontinuum, and to interpret the physics of the underlying spectral broadening processes. Particular attention is given to the case of supercontinuum generation seeded by femtosecond pulses in the anomalous group velocity dispersion regime of photonic crystal fiber, where the processes of soliton fission, stimulated Raman scattering, and dispersive wave generation are reviewed in detail. The corresponding intensity and phase stability properties of the supercontinuum spectra generated under different conditions are also discussed.