Philippe Genevaux

Bio: Philippe Genevaux is an academic researcher from Bell Labs. The author has contributed to research in topics: Wavelength-division multiplexing & Mode volume. The author has an hindex of 8, co-authored 14 publications receiving 493 citations.

Efficient and mode selective spatial mode multiplexer based on multi-plane light conversion.

Abstract: We designed and built a new type of spatial mode multiplexer, based on Multi-Plane Light Conversion (MPLC), with very low intrinsic loss and high mode selectivity. In this first demonstration we show that a typical 3-mode multiplexer achieves a mode selectivity better than −23 dB and a total insertion efficiency of −4.1 dB (optical coating improvements could increase efficiency to −2.4 dB), across the full C-band. Moreover this multiplexer is able to perform any mode conversion, and we demonstrate its performance for the first 6 eigenmodes of a few-mode fiber: LP01, LP11a, LP11b, LP02, LP21a and LP21b.

Efficient and mode selective spatial mode multiplexer based on Multi-Plane Light Conversion

Abstract: We designed and built a new type of spatial mode multiplexer, based on Multi-Plane Light Conversion (MPLC), with very low intrinsic loss and high mode selectivity. In this first demonstration we show that a typical 3-mode multiplexer achieves a mode selectivity better than -23 dB and a total insertion efficiency of -4.1 dB (optical coating improvements could increase efficiency to -2.4 dB), across the full C-band. Moreover this multiplexer is able to perform any mode conversion, and we demonstrate its performance for the first 6 eigenmodes of a few-mode fiber: LP$_{01}$, LP$_{11\mathrm{a}}$, LP$_{11\mathrm{b}}$, LP$_{02}$, LP$_{21\mathrm{a}}$ and LP$_{21\mathrm{b}}$.

6-mode spatial multiplexer with low loss and high selectivity for transmission over few mode fiber

Abstract: We present a spatial 6-mode multiplexer with low loss and high mode selectivity. We demonstrate 100Gbit/s error-free transmission over 20km for 6 modes and over 40km bi-directional transmission with 3 modes in each direction.

Mode coupling at connectors in mode-division multiplexed transmission over few-mode fiber

Abstract: In mode-division multiplexed (MDM) transmission systems, mode coupling is responsible for inter-modal crosstalk. We consider the transmission of modulated signals over a few-mode fiber (FMF) having low mode coupling and large differential mode group delay in the presence of a non-ideal fiber connection responsible for extra mode coupling. In this context, we first analytically derive the coupling matrix of the multimode connector and we numerically study the dependence of the matrix coefficients as a function of the butt-joint connection characteristics. The numerical results are then validated through an experiment with a five-mode setup. Finally, through numerical simulations, we assess the impact of the connector on the signal quality investigating different receiver digital signal processing (DSP) schemes.

Fourier-transform method of fringe-pattern analysis for computer-based topography and interferometry

Abstract: A fast-Fourier-transform method of topography and interferometry is proposed. By computer processing of a noncontour type of fringe pattern, automatic discrimination is achieved between elevation and depression of the object or wave-front form, which has not been possible by the fringe-contour-generation techniques. The method has advantages over moire topography and conventional fringe-contour interferometry in both accuracy and sensitivity. Unlike fringe-scanning techniques, the method is easy to apply because it uses no moving components.

Space-division multiplexing: the next frontier in optical communication

Abstract: Space-division multiplexing (SDM) uses multiplicity of space channels to increase capacity for optical communication. It is applicable for optical communication in both free space and guided waves. This paper focuses on SDM for fiber-optic communication using few-mode fibers or multimode fibers, in particular on the critical challenge of mode crosstalk. Multiple-input–multiple-output (MIMO) equalization methods developed for wireless communication can be applied as an electronic method to equalize mode crosstalk. Optical approaches, including differential modal group delay management, strong mode coupling, and multicore fibers, are necessary to bring the computational complexity for MIMO mode crosstalk equalization to practical levels. Progress in passive devices, such as (de)multiplexers, and active devices, such as amplifiers and switches, which are considered straightforward challenges in comparison with mode crosstalk, are reviewed. Finally, we present the prospects for SDM in optical transmission and networking.

Advances in communications using optical vortices

Abstract: An optical vortex having an isolated point singularity is associated with the spatial structure of light waves. A polarization vortex (vector beam) with a polarization singularity has spatially variant polarizations. A phase vortex with phase singularity or screw dislocation has a spiral phase front. The optical vortex has recently gained increasing interest in optical trapping, optical tweezers, laser machining, microscopy, quantum information processing, and optical communications. In this paper, we review recent advances in optical communications using optical vortices. First, basic concepts of polarization/phase vortex modulation and multiplexing in communications and key techniques of polarization/phase vortex generation and (de)multiplexing are introduced. Second, free-space and fiber optical communications using optical vortex modulation and optical vortex multiplexing are presented. Finally, key challenges and perspectives of optical communications using optical vortices are discussed. It is expected that optical vortices exploiting the space physical dimension of light waves might find more interesting applications in optical communications and interconnects.

Programmable photonic circuits.

Abstract: The growing maturity of integrated photonic technology makes it possible to build increasingly large and complex photonic circuits on the surface of a chip. Today, most of these circuits are designed for a specific application, but the increase in complexity has introduced a generation of photonic circuits that can be programmed using software for a wide variety of functions through a mesh of on-chip waveguides, tunable beam couplers and optical phase shifters. Here we discuss the state of this emerging technology, including recent developments in photonic building blocks and circuit architectures, as well as electronic control and programming strategies. We cover possible applications in linear matrix operations, quantum information processing and microwave photonics, and examine how these generic chips can accelerate the development of future photonic circuits by providing a higher-level platform for prototyping novel optical functionalities without the need for custom chip fabrication. The current state of programmable photonic integrated circuits is discussed, including recent developments in their building blocks, circuit architectures, electronic control and programming strategies, as well as different application spaces.

Light fields in complex media: Mesoscopic scattering meets wave control

Abstract: Wave front shaping, the ability to manipulate light fields both spatially and temporally, in complex media is an emerging field with many applications. This review summarizes how insights from mesoscopic scattering theory have direct relevance for optical wave control experiments and vice versa. The results are expected to have an impact on a number of fields ranging from biomedical imaging to nanophotonics, quantum information, and communication technology.