Phuong Nguyen-Tri

Bio: Phuong Nguyen-Tri is an academic researcher from Université du Québec à Trois-Rivières. The author has contributed to research in topics: Materials science & Coating. The author has an hindex of 16, co-authored 66 publications receiving 809 citations. Previous affiliations of Phuong Nguyen-Tri include Université de Montréal & Conservatoire national des arts et métiers.

Nanocomposite Coatings: Preparation, Characterization, Properties, and Applications

Abstract: Incorporation of nanofillers into the organic coatings might enhance their barrier performance, by decreasing the porosity and zigzagging the diffusion path for deleterious species. Thus, the coatings containing nanofillers are expected to have significant barrier properties for corrosion protection and reduce the trend for the coating to blister or delaminate. On the other hand, high hardness could be obtained for metallic coatings by producing the hard nanocrystalline phases within a metallic matrix. This article presents a review on recent development of nanocomposite coatings, providing an overview of nanocomposite coatings in various aspects dealing with the classification, preparative method, the nanocomposite coating properties, and characterization methods. It covers potential applications in areas such as the anticorrosion, antiwear, superhydrophobic area, self-cleaning, antifouling/antibacterial area, and electronics. Finally, conclusion and future trends will be also reported.

Review on discharge Plasma for water treatment: mechanism, reactor geometries, active species and combined processes

Abstract: Owing to the water crisis, the development of innovative and clean advanced oxidation processes to decompose a variety of harmful organic compounds in wastewater becomes the main challenge for many research teams. Cold discharge plasma is one of the most widely studied and developed processes, owing to its low energy cost and easy to operate. The impact of different factors on the decontamination effectiveness of discharge plasma are detailed in this review. The generation and reaction mechanisms of reactive species in discharge plasma systems have also gained a significant interest and hence discussed. Several potentials and laboratory-scale reactor design recently reported are discussed and schematically presented. The recent combination of discharge plasma decontamination and other processes in both post and pre-treatment configuration are reported. Some applications of water treatment based on discharge plasma at the pilot scale have been addressing.

Lignocellulosic biorefineries: The current state of challenges and strategies for efficient commercialization

Abstract: Lignocellulosic biomass is the most abundant and sustainable feedstock available globally. As a source of the polysaccharides, cellulose and hemicellulose, it can be converted into biofuels and other platform chemicals. This article highlights some important aspects that needs to be focused upon for the commercial development of lignocellulosic biorefineries. Although, lignocellulosic biomass offers clear value in terms of its green advantages and sustainability, there has been very low commercial success at industrial production levels. This can be attributed to a few key factors such as an irregular biomass supply chain, inefficient or complex pre-treatment and saccharification technologies, and scale up challenges leading to high capital and operating expenditures. Moreover, techno-economic studies performed on lignocellulosic biorefineries have revealed that process complexity is the most detrimental factor prohibiting scale-up. Although there have been several research efforts funded both by the public and private sectors, biomass valorization into biofuels and chemicals remains a technical and economical challenge. This review examines the global drivers towards the advancements of lignocellulosic biorefineries, technical and operational challenges for industrialization and future directions towards overcoming them.

Robust Superhydrophobic Cotton Fibers Prepared by Simple Dip-Coating Approach Using Chemical and Plasma-Etching Pretreatments.

Abstract: The preparation of superhydrophobic textiles with high mechanical and chemical durability is challenging. Here, facile and fluorine-free methods, using alkali and plasma-etching treatments, followed by the addition of silica nanoparticles and tetraethyl orthosilicate (TEOS), were used to prepare superhydrophobic cotton surfaces. With different input variables and etching techniques, superhydrophobic cotton fabrics with high chemical and mechanical durability were successfully prepared, with contact angles up to 173°. A control of the surface architecture at the nanoscale in combination with a homogeneous repellent layer of TEOS in the cotton surface was achieved. The repellent properties of the as-prepared cotton remain stable under accelerated laundering and abrasion test conditions. The etching pretreatment by alkali or plasma plays a key role in obtaining superhydrophobic cotton surfaces.

Nanomaterials: Classification, properties, and environmental toxicities

Abstract: Nanomaterials (NMs) are gaining significance in technological applications due to their tunable chemical, physical, and mechanical properties and enhanced performance when compared with their bulkier counterparts. This review presents a summary of the general types of NMs and provides an overview of the various synthesis methods of nanoparticles (NPs) and their functionalization via covalent or noncovalent interactions using different methods. It highlights the techniques used for the characterization of NPs and discusses their physical and chemical properties. Due to their unique properties, NMs have several applications and have become part of our daily lives. As a result, nanotoxicity research is gaining attention since some NPs are not easily degraded by the environment. Thus, this review also highlights research efforts into the fate, behavior, and toxicity of different classes of NMs in the environment.

The role of pretreatment in improving the enzymatic hydrolysis

Abstract: Lignocellulosic materials are among the most promising alternative energy resources that can be utilized to produce cellulosic ethanol. However, the physical and chemical structure of lignocellulosic materials forms strong native recalcitrance and results in relatively low yield of ethanol from raw lignocellulosic materials. An appropriate pretreatment method is required to overcome this recalcitrance. For decades various pretreatment processes have been developed to improve the digestibility of lignocellulosic biomass. Each pretreatment process has a different specificity on altering the physical and chemical structure of lignocellulosic materials. In this paper, the chemical structure of lignocellulosic biomass and factors likely affect the digestibility of lignocellulosic materials are discussed, and then an overview about the most important pretreatment processes available are provided. In particular, the combined pretreatment strategies are reviewed for improving the enzymatic hydrolysis of lignocellulose and realizing the comprehensive utilization of lignocellulosic materials.

Urban building energy modeling – A review of a nascent field

Abstract: Over the past decades, detailed individual building energy models (BEM) on the one side and regional and country-level building stock models on the other side have become established modes of analysis for building designers and energy policy makers, respectively. More recently, these two toolsets have begun to merge into hybrid methods that are meant to analyze the energy performance of neighborhoods, i.e. several dozens to thousands of buildings. This paper reviews emerging simulation methods and implementation workflows for such bottom-up urban building energy models (UBEM). Simulation input organization, thermal model generation and execution, as well as result validation, are discussed successively and an outlook for future developments is presented.

Superhydrophobic modification of cellulose and cotton textiles: Methodologies and applications

Abstract: Superhydrophobic cellulose-based products have immense potential in many industries where plastics and other polymers with hydrophobic properties are used. Superhydrophobic cellulose-based plastic is inherently biodegradable, renewable and non-toxic. Finding a suitable replacement of plastics is highly desired since plastics has become an environmental concern. Despite its inherent hydrophilicity, cellulose has unparalleled advantages as a substrate for the production of superhydrophobic materials which has been widely used in self-cleaning, self-healing, oil and water separation, electromagnetic interference shielding, etc. This review includes a comprehensive survey of the progress achieved so far in the production of super-hydrophobic materials based on cellulose and fiber networks. The method-ologies and applications of superhydrophobic-modified cellulose and fiber networks are emphasized. Overall, presented herein is targeting on summarizing some of the aspects that are critical to advance this evolving field of science which may provide new ideas for the developing and exploring of superhydrophobic and green-based materials.