SUMMARY

New geomorphological and structural data permitted to define the active faulting framework of the eastern Southern Alps (NE Italy). All the active faults detected in the investigated area are thrust segments of the complex thrust system, which has been responsible for the latest building of the Eastern Southalpine chain (ESC). Geomorphological investigations were performed to identify the surficial traces of recent fault activity, generally represented by gentle scarps connecting uplifted palaeolandscapes of Quaternary age with the flat and lower areas of the Venetian and Friulian plains. Surficial and subsurficial data (the latter from reflection seismic profiles) available for the investigated faults indicate that the thrusts have been responsible for the displacement of the entire wedge of Quaternary deposits. In the western sector of the investigated area, the six recognized fault segments represent portions of a 100-km-long thrust system, at the boundary between the Alpine relief and the plain areas. In the eastern sector, active tectonics is the result of parallel thrust segments, located both in the Alpine mountainous area and in the Friulian plain. The 3-D geometry of the active thrust segments has been derived from new structural surficial surveys and the interpretation of reflection seismic profiles for a total length of 1700 km. On this basis, we defined the geometry of 10 seismogenic sources whose dimensions are consistent with the occurrence of earthquakes with M≥ 6. The comparison between the source geometry and the highest intensity data point distribution of large historical earthquakes has permitted to make hypotheses on the association of past seismic events to specific seismogenic sources. This procedure indicated that no large historical events can be attributed to three sources (Montello-Conegliano, Arba-Ragogna, Medea). This may indicate an elapsed time since the last activation of more than eight centuries, based on the completeness of the historical catalogues. The available data define, therefore, sources (and related areas) for which a high level of seismic hazard may be invoked.

/pdf/seismogenic-sources-potentially-responsible-for-earthquakes-2venb2zdvh.pdf

Seismogenic sources potentially responsible for earthquakes with M≥ 6 in the eastern Southern Alps (Thiene–Udine sector, NE Italy)

Late cenozoic tectonics of slovenia: structural styles at the northeastern corner of the adriatic microplate

Results are presented of the first airborne LiDAR survey ever flown in Europe for the purpose of mapping the surface expression of earthquake-prone faults. Detailed topographic images derived from LiDAR data of the Idrija and Ravne strike-slip faults in NW Slovenia reveal geomorphological and structural features that shed light on the overall architecture and kinematic history of both fault systems. The 1998 Mw = 5.6, and 2004 Mw = 5.2 Ravne Fault earthquakes and the historically devastating 1511 M = 6.8 Idrija earthquake indicate that both systems pose a serious seismic hazard in the region. Because both fault systems occur within forested terrain, a tree removal algorithm was applied to the data; the resulting images reveal surface scarps and tectonic landforms in unprecedented detail. Importantly, two sites were discovered to be potentially suitable for fault trenching and palaeo-seismological analysis. This study highlights the potential contribution of LiDAR surveying in both low-relief valley terrain and high-relief mountainous terrain to a regional seismic hazard assessment programme. Geoscientists working in other tectonically active regions of the world where earthquake-prone faults are obscured by forest cover would also benefit from LiDAR maps that have been processed to remove the canopy return and reveal the forest floor topography.

https://agupubs.onlinelibrary.wiley.com/doi/pdf/10.1029/2006GL027014

Application of airborne LiDAR to mapping seismogenic faults in forested mountainous terrain, southeastern Alps, Slovenia

[1] Alp01 and Alp02 are the longest profiles recorded during ALP 2002, a large international seismic refraction and wide-angle reflection experiment undertaken in the Eastern Alps in 2002. Alp01 crosses the Alpine orogen from north to south, thus providing a cross section mainly affected by the collision between Europe and the Adriatic microplate. Alp02 extends from the Eastern Alps to the Pannonian basin, supplying evidence on the relation between Alpine crustal structure and tectonic escape to the Pannonian basin. During this experiment, 363 single-channel recorders were deployed along these profiles with an average spacing of 3.2 km. Recordings from 20 inline shots were used in this study. Two-dimensional forward modeling using interactive ray-tracing techniques produced detailed P wave velocity models that contain many features of tectonic significance. Along Alp01, the European Moho dips generally to the south and reaches a maximum depth of 47 km below the transition from the Eastern to the Southern Alps. The Adriatic Moho continues further south at a significantly shallower depth. Moho topography and a prominent south-dipping mantle reflector in the Alpine area support the idea of southward subduction of the European lithosphere below the Adriatic microplate. The most prominent tectonic feature on the Alp02 profile is a vertical step of the Moho at the transition between the Alpine and Pannonian domains, suggesting the existence of a separate Pannonian plate fragment. The development of the Pannonian fragment is interpreted to be a consequence of crustal thinning due to tectonic escape from the Alpine collision area to the Pannonian basin.

https://agupubs.onlinelibrary.wiley.com/doi/pdf/10.1029/2006JB004687

Crustal structure due to collisional and escape tectonics in the Eastern Alps region based on profiles Alp01 and Alp02 from the ALP 2002 seismic experiment

https://www.earth-prints.org/bitstream/2122/4300/2/Burrato_etal_2008_Tectonophysics_print.pdf

Sources of Mw 5+ earthquakes in northeastern Italy and western Slovenia: An updated view based on geological and seismological evidence

Slovenia with its neighbouring areas lies at the junction of the Alps, the Dinarides and the Pannonian basin. These belong to the three plates: Europe, Adria and Tisza. On the Slovenian territory itself converge the External Dinarides NW-SE oriented right lateral strike-slip faults, the Transdanubian Range NE-SW oriented left lateral strike-slip faults, and the Southern Alps E-W oriented thrusts. The direction of the principal stress σ1, (azimuth = 6°, dip = 8°) is determined under the assumption of uniform stress throughout the region. Dip of the least principal stress σ3 of 5° is consistent with the regional strike-slip regime. Listed structures form a pure shear structural mechanism on a regional scale.

The Seismotectonic Characteristics of Slovenia

The city of Ljubljana is located in one of the three areas with the highest seismic hazard in Slovenia, and it is also the most densely populated. Site effects due to Quaternary sediments, which fill the up to 200 m-deep basin, are characteristic of the whole city area, but they can be especially strong in the southern part of Ljubljana, which is built on very soft lacustrine deposits. Existing microzonation studies of the city are inadequate, since there is a lack of borehole, geophysical and earthquake data. The microtremor horizontal-to-vertical spectral ratio (HVSR) method was therefore applied to a 200 m dense grid of free-field measurements over an area of 45 km2 (1,223 measuring points) in order to assess the fundamental frequency of the sediments. The main difficulties in microtremor measurement arose from high levels of traffic and industrial noise, and from underground structures. Experimental conditions which can influence data quality, such as strong wind and water saturation of soil, were analysed. Very clear HVSR peaks were obtained in the entire southern part of the city, whereas in the northern part the site response is in general lower due to lower impedance contrast of gravel with the bedrock. The iso-frequency map of sediments shows a distribution in the range of 0.9–10 Hz. In the southern part of Ljubljana, sediment frequency correlates well with the thickness of soft sediments known from geophysical investigations and sparse drilling. Average amplitude of the HVSR peaks is considerably higher in the southern part (6.7 ± 2.4) than in the northern part (4.0 ± 2.0) of the city, indicating a high impedance contrast of lacustrine sediments with the bedrock. Microtremor measurements were also performed inside 122 buildings of various heights. We focused on important public buildings and selected blocks of flats and houses. To assess the longitudinal and transverse fundamental frequencies of each building, amplitude spectra and the spectral ratio between the upper floor and the basement were analysed for both directions. When one of these frequencies is close to a nearby free-field fundamental frequency, a potential soil-structure resonance is present. This was found in 12 of the measured buildings. Three of them are tall residential buildings (from 10 to 15 floors) with a fundamental frequency of 2–3 Hz, and nine of them are low-rise buildings (from 3 to 5 floors) with a fundamental frequency ranging from 3 to 4.5 Hz. Using the relationship between fundamental frequency and height, the typical height of buildings that might cause soil-structure resonance can be estimated at a given sediment frequency obtained from free-field measurements.

Polona Zupančič

Papers

The Seismotectonic Characteristics of Slovenia

Microtremor study of site effects and soil-structure resonance in the city of Ljubljana (central Slovenia)

The eartquake of 12 April 1998 in the Krn Mountains (upper Soča valley, Slovenia) and its seismotectonic characteristics

The 2021 seismic hazard model for Slovenia (SHMS21): overview and results