Prabhu Rajagopal

Bio: Prabhu Rajagopal is an academic researcher from Indian Institute of Technology Madras. The author has contributed to research in topics: Ultrasonic sensor & Guided wave testing. The author has an hindex of 18, co-authored 129 publications receiving 1035 citations. Previous affiliations of Prabhu Rajagopal include Imperial College London & Indian Institutes of Technology.

Ultrasonic guided waves in elliptical annular cylinders

Abstract: This paper studies the influence of cross-section ovalness or ellipticity on lower order axisymmetric guided wave modes in thin pipes. The second longitudinal mode L(0,2) and the fundamental torsional mode T(0,1) are studied, as these are of interest to current pipe inspection. The semi-analytical finite element (FE) method is mainly used, with three-dimensional FE simulations for visualization and cross-validation of results. The studies reveal that even a small degree of ovalness can affect mode shapes and velocities. The effect is more pronounced on the L(0,2) mode than on T(0,1) and this may be important for practical inspection applications.

Low frequency axisymmetric longitudinal guided waves in eccentric annular cylinders.

Abstract: This paper studies the effect of axially uniform eccentricity on the modal structures and velocities of the lower order axisymmetric guided wave mode L(0,2) in circular tubes or pipes. The semi-analytical finite element method is mainly used, supported by fully three-dimensional finite element models and validated using experiments. The studies show that even a small eccentricity in the pipe can cause a loss in the L(0,2) mode axisymmetry, leading to its confinement in the thinned side of the pipe cross-section and also a reduction in mode velocities. The physics of this phenomenon is related to the feature-guiding and mode confinement effects noted in recent years in the literature, particularly studies on waveguides with local cross-section variations and curvature.

Waveguide metamaterial rod as mechanical acoustic filter for enhancing nonlinear ultrasonic detection

Abstract: Nonlinear ultrasonic guided waves are among the most promising new tools for early stage damage detection owing to their high sensitivity and long-range propagation features. However, signatures from instrumentation, transducers, and couplant effects create false positives mixing with the material- or defect-induced nonlinearities, leading to inaccurate measurements. Here, we propose a novel technique using a waveguide metamaterial rod, which acts as a mechanical acoustic filter for suppression of higher harmonic components in the measured signal. The proposed waveguide metamaterial consists of an array of flat axisymmetric ridges arranged periodically on the surface of the rod. It is experimentally demonstrated that the higher harmonic components are filtered when the proposed metamaterial rod is placed at the transmission side, thus removing unwanted nonlinearities from the received signal in a pitch-catch configuration. Furthermore, the application of this method is demonstrated by detecting a discontinuity in the workpiece through its nonlinear response enhanced using the metamaterial. This technique is attractive for early stage material diagnosis in engineering, biomedicine, and health monitoring of critical engineering assets.

Probability and Statistical Inference

Abstract: The Foundations of Statistics By Prof. Leonard J. Savage. (Wiley Publications in Statistics.) Pp. xv + 294. (New York; John Wiley and Sons, Inc.; London: Chapman and Hall, Ltd., 1954.) 48s. net.

X-ray computed tomography for additive manufacturing: a review

Abstract: In this review, the use of x-ray computed tomography (XCT) is examined, identifying the requirement for volumetric dimensional measurements in industrial verification of additively manufactured (AM) parts. The XCT technology and AM processes are summarised, and their historical use is documented. The use of XCT and AM as tools for medical reverse engineering is discussed, and the transition of XCT from a tool used solely for imaging to a vital metrological instrument is documented. The current states of the combined technologies are then examined in detail, separated into porosity measurements and general dimensional measurements. In the conclusions of this review, the limitation of resolution on improvement of porosity measurements and the lack of research regarding the measurement of surface texture are identified as the primary barriers to ongoing adoption of XCT in AM. The limitations of both AM and XCT regarding slow speeds and high costs, when compared to other manufacturing and measurement techniques, are also noted as general barriers to continued adoption of XCT and AM.