There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality.

Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

I and i

Two organolead halide perovskite nanocrystals, CH3NH3PbBr3 and CH3NH3PbI3, were found to efficiently sensitize TiO2 for visible-light conversion in photoelectrochemical cells. When self-assembled on mesoporous TiO2 films, the nanocrystalline perovskites exhibit strong band-gap absorptions as semiconductors. The CH3NH3PbI3-based photocell with spectral sensitivity of up to 800 nm yielded a solar energy conversion efficiency of 3.8%. The CH3NH3PbBr3-based cell showed a high photovoltage of 0.96 V with an external quantum conversion efficiency of 65%.

Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells

Single-layer metal dichalcogenides are two-dimensional semiconductors that present strong potential for electronic and sensing applications complementary to that of graphene.

/pdf/electronics-and-optoelectronics-of-two-dimensional-2jbqr1unvw.pdf

Electronics and optoelectronics of two-dimensional transition metal dichalcogenides.

Although gold is the subject of one of the most ancient themes of investigation in science, its renaissance now leads to an exponentially increasing number of publications, especially in the context of emerging nanoscience and nanotechnology with nanoparticles and self-assembled monolayers (SAMs). We will limit the present review to gold nanoparticles (AuNPs), also called gold colloids. AuNPs are the most stable metal nanoparticles, and they present fascinating aspects such as their assembly of multiple types involving materials science, the behavior of the individual particles, size-related electronic, magnetic and optical properties (quantum size effect), and their applications to catalysis and biology. Their promises are in these fields as well as in the bottom-up approach of nanotechnology, and they will be key materials and building block in the 21st century. Whereas the extraction of gold started in the 5th millennium B.C. near Varna (Bulgaria) and reached 10 tons per year in Egypt around 1200-1300 B.C. when the marvelous statue of Touthankamon was constructed, it is probable that “soluble” gold appeared around the 5th or 4th century B.C. in Egypt and China. In antiquity, materials were used in an ecological sense for both aesthetic and curative purposes. Colloidal gold was used to make ruby glass 293 Chem. Rev. 2004, 104, 293−346

Gold nanoparticles: assembly, supramolecular chemistry, quantum-size-related properties, and applications toward biology, catalysis, and nanotechnology.

To use solar irradiation or interior lighting efficiently, we sought a photocatalyst with high reactivity under visible light. Films and powders of TiO 2- x N x have revealed an improvement over titanium dioxide (TiO 2 ) under visible light (wavelength 2 has proven to be indispensable for band-gap narrowing and photocatalytic activity, as assessed by first-principles calculations and x-ray photoemission spectroscopy.

/pdf/visible-light-photocatalysis-in-nitrogen-doped-titanium-np6nklr9gh.pdf

Visible-Light Photocatalysis in Nitrogen-Doped Titanium Oxides

Smart material nanoassemblies that can simultaneously sense and shoot low-level contaminants from air and water are important for overcoming the threat of hazardous chemicals. Graphene oxide (GO) sheets deposited on mesoscopic TiO2 films that underpin the deposition of Ag nanoparticles with UV irradiation provide the foundation for the design of a smart material. The Ag particle size is readily controlled through precursor concentration and UV irradiation time. These semiconductor–graphene oxide–metal (SGM) films are SERS-active and hence capable of sensing aromatic contaminants such as 4-nitrobenzenethiol (4-NBT) in nanomolar range. Increased local concentration of organic molecules achieved through interaction with 2-D carbon support (GO) facilitates low-level detection of contaminants. Upon UV irradiation of 4-NBT-loaded SGM film, one can induce photocatalytic transformations. Thus, each component of the SGM film plays a pivotal role in aiding the detection and degradation of a contaminant dispersed in aqueous solutions. The advantage of using SGM films as multipurpose “detect and destroy” systems for nitroaromatic molecules is discussed.

Sense and Shoot: Simultaneous Detection and Degradation of Low-Level Contaminants Using Graphene-Based Smart Material Assembly

The power conversion efficiency of semiconductor nanowire (NW) based solar cells as compared to quantum dot solar cell (QDSC) has remained lower, and efforts to improve the photovoltaic performance of semiconductor NWs continue. We have now succeeded in using a layered architecture of CdS and CdSe NWs for improving the photovoltaic performance of nanowire solar cell (NWSC). The photoanode designed with sequentially deposited films of CdSe and CdS NWs delivered a power conversion efficiency of 1%. This efficiency of CdSe/CdS composite is an order of magnitude improvement over single nanowire system (CdS or CdSe) based solar cell. The improvement seen in the CdSe/CdS composite film is attributed to charge rectification and improvement of electron and hole separation and transport in the opposite direction. Impedance spectroscopy demonstrates the beneficial effect of type II structure in CdSe/CdS sequential deposition through lower transport resistance, which remains a dominating effect in dictating the over...

Sequentially layered CdSe/CdS nanowire architecture for improved nanowire solar cell performance

Plasmons for Energy Conversion

Multinary semiconductor nanoparticles such as CuInS2, AgInS2, and the corresponding alloys with ZnS hold promise for designing future quantum dot light-emitting devices (QLED). The QLED architectures require matching of energy levels between the different electron and hole transport layers. In addition to energy level alignment, conductivity and charge transfer interactions within these layers determine the overall efficiency of QLED. By employing CuInS2–ZnS QDs we succeeded in fabricating red-emitting QLED using two different hole-transporting materials, polyvinylcarbazole and poly(4-butylphenyldiphenylamine). Despite the similarity of the HOMO–LUMO energy levels of these two hole transport materials, the QLED devices exhibit distinctly different voltage dependence. The difference in onset voltage and excited state interactions shows the complexity involved in selecting the hole transport materials for display devices.

http://pubs.acs.org/doi/pdf/10.1021/acsami.7b07893

Quantum Dot Light-Emitting Devices: Beyond Alignment of Energy Levels

Embodiments of the present invention provide nanomaterial scaffolds for transporting electrons. There is provided a single wall carbon nanotube (SWCNT) architecture employed as a conducting scaffold in semiconductor based photoelectrochemical cells. SWCNT architecture provides a nanotube network to disperse nanoparticles and/or quantum dots, whether ordered or randomized. As a result, an increase in incident photon conversion to charge carrier conversion efficiency (IPCE) represents a beneficial role of SWCNT architecture as a conducting scaffold to facilitate charge collection and charge transport in nanostructured semiconductor films. Embodiments may be used for solar cells based on semiconductor quantum dots and nanostructures, solar hydrogen production, microcapacitors and storage batteries, solar-fuel cell hybrids, etc.

Prashant V. Kamat

Papers

Sense and Shoot: Simultaneous Detection and Degradation of Low-Level Contaminants Using Graphene-Based Smart Material Assembly

Sequentially layered CdSe/CdS nanowire architecture for improved nanowire solar cell performance

Plasmons for Energy Conversion

Quantum Dot Light-Emitting Devices: Beyond Alignment of Energy Levels

Nanomaterial scaffolds for electron transport