Priyanka Dwivedi

Bio: Priyanka Dwivedi is an academic researcher from Indian Institutes of Technology. The author has contributed to research in topics: Porous silicon & Field-effect transistor. The author has an hindex of 6, co-authored 24 publications receiving 191 citations. Previous affiliations of Priyanka Dwivedi include Indian Institute of Technology Delhi & University of Central Florida.

Wafer-Scale Synthesized MoS2/Porous Silicon Nanostructures for Efficient and Selective Ethanol Sensing at Room Temperature

Abstract: This paper presents the performance of a highly selective ethanol sensor based on MoS2-functionalized porous silicon (PSi) The uniqueness of the sensor includes its method of fabrication, wafer scalability, affinity for ethanol, and high sensitivity MoS2 nanoflakes (NFs) were synthesized by sulfurization of oxidized radio-frequency (RF)-sputtered Mo thin films The MoS2 NFs synthesis technique is superior in comparison to other methods, because it is chip-scalable and low in cost Interdigitated electrodes (IDEs) were used to record resistive measurements from MoS2/PSi sensors in the presence of volatile organic compound (VOC) and moisture at room temperature With the effect of MoS2 on PSi, an enhancement in sensitivity and a selective response for ethanol were observed, with a minimum detection limit of 1 ppm The ethanol sensitivity was found to increase by a factor of 5, in comparison to the single-layer counterpart levels This impressive response is explained on the basis of an analytical resistiv

Scalable fabrication of prototype sensor for selective and sub-ppm level ethanol sensing based on TiO2 nanotubes decorated porous silicon

Abstract: A miniaturized prototype sensor based on TiO2 nanotubes/porous silicon (PS) heterojunction is developed for selective ethanol sensing in sub-ppm range. Titanium (Ti) of thickness ∼ 200 nm was deposited on PS using RF sputtering technique. Both silicon and Ti were sequentially anodized to form PS and nanotubes respectively. Electrical contacts for testing of resistive sensors were fabricated using lift off process. The sensor was packaged onto a 12-pin header and tested in presence of different VOCs with concentration ranging from 0.5 to 100 ppm. The selective ethanol sensing at around 150 °C stems from the formation of TiO2 nanotubes/PS heterojunction. The sensitivity of such a sensor, improved manifold in comparison to the response of pure PS and pure TiO2 based sensors. The formation of heterojunction, selective response to ethanol, sub-ppm level sensing at comparatively low operating temperature is discussed. The study unfolds the collective properties of TiO2/PS heterojunction and demonstrates the potential of wafer scale integrated repeatable ethanol sensor tested at sub-ppm level.

Synthesis of α-MoO3 nano-flakes by dry oxidation of RF sputtered Mo thin films and their application in gas sensing

Abstract: Synthesis of orthorhombic (α) MoO3 nano-flakes by dry oxidation of RF sputtered Mo thin film is presented. The influence of Mo thickness variation, oxidation temperature and time on the crystallographic structure, surface morphology and roughness of MoO3 thin films was studied using SEM, AFM, XRD and Raman spectroscopy. A structural study shows that MoO3 is polycrystalline in nature with an α phase. It was noticed that oxidation temperature plays an important role in the formation of nano-flakes. The synthesis technique proposed is simple and suitable for large scale productions. The synthesis parameters were optimized for the fabrication of sensors. Chrome gold-based IDE (interdigitated electrodes) structures were patterned for the electrical detection of organic vapors. Sensors were exposed to wide range 5–100 ppm of organic vapors like ethanol, acetone, IPA (isopropanol alcohol) and water vapors. α-MoO3 nano-flakes have demonstrated selective sensing to acetone in the range of 10–100 ppm at 150 °C. The morphology of such nanostructures has potential in applications such as sensor devices due to their high surface area and thermal stability.

High performance broadband photodetector based on MoS2/porous silicon heterojunction

Abstract: A high speed efficient broadband photodetector based on a vertical n-MoS2/p-porous silicon heterostructure has been demonstrated. Large area MoS2 on electrochemical etched porous silicon was grown by sulphurization of a sputtered MoO3 thin film. A maximum responsivity of 9 A/W (550–850 nm) with a very high detectivity of ∼1014 Jones is observed. Transient measurements show a fast response time of ∼9 μs and is competent to work at high frequencies (∼50 kHz). The enhanced photodetection performance of the heterojunction made on porous silicon over that made on planar silicon is explained in terms of higher interfacial barrier height, superior light trapping property, and larger junction area in the MoS2/porous silicon junction.

Molybdenum Oxides – From Fundamentals to Functionality

Abstract: The properties and applications of molybdenum oxides are reviewed in depth. Molybdenum is found in various oxide stoichiometries, which have been employed for different high-value research and commercial applications. The great chemical and physical characteristics of molybdenum oxides make them versatile and highly tunable for incorporation in optical, electronic, catalytic, bio, and energy systems. Variations in the oxidation states allow manipulation of the crystal structure, morphology, oxygen vacancies, and dopants, to control and engineer electronic states. Despite this overwhelming functionality and potential, a definitive resource on molybdenum oxide is still unavailable. The aim here is to provide such a resource, while presenting an insightful outlook into future prospective applications for molybdenum oxides.

Electrically-Transduced Chemical Sensors Based on Two-Dimensional Nanomaterials

Abstract: Electrically–transduced sensors, with their simplicity and compatibility with standard electronic technologies, produce signals that can be efficiently acquired, processed, stored, and analyzed. Two dimensional (2D) nanomaterials, including graphene, phosphorene (BP), transition metal dichalcogenides (TMDCs), and others, have proven to be attractive for the fabrication of high–performance electrically-transduced chemical sensors due to their remarkable electronic and physical properties originating from their 2D structure. This review highlights the advances in electrically-transduced chemical sensing that rely on 2D materials. The structural components of such sensors are described, and the underlying operating principles for different types of architectures are discussed. The structural features, electronic properties, and surface chemistry of 2D nanostructures that dictate their sensing performance are reviewed. Key advances in the application of 2D materials, from both a historical and analytical pers...

Nanohybrids of a MXene and transition metal dichalcogenide for selective detection of volatile organic compounds.

Abstract: Two-dimensional transition metal carbides/nitrides, known as MXenes, have been recently receiving attention for gas sensing. However, studies on hybridization of MXenes and 2D transition metal dichalcogenides as gas-sensing materials are relatively rare at this time. Herein, Ti3C2Tx and WSe2 are selected as model materials for hybridization and implemented toward detection of various volatile organic compounds. The Ti3C2Tx/WSe2 hybrid sensor exhibits low noise level, ultrafast response/recovery times, and good flexibility for various volatile organic compounds. The sensitivity of the hybrid sensor to ethanol is improved by over 12-fold in comparison with pristine Ti3C2Tx. Moreover, the hybridization process provides an effective strategy against MXene oxidation by restricting the interaction of water molecules from the edges of Ti3C2Tx. An enhancement mechanism for Ti3C2Tx/WSe2 heterostructured materials is proposed for highly sensitive and selective detection of oxygen-containing volatile organic compounds. The scientific findings of this work could guide future exploration of next-generation field-deployable sensors.

A review of molybdenum disulfide (MoS2) based photodetectors: from ultra-broadband, self-powered to flexible devices

Abstract: Two-dimensional transition metal dichalcogenides (2D TMDs) have attracted much attention in the field of optoelectronics due to their tunable bandgaps, strong interaction with light and tremendous capability for developing diverse van der Waals heterostructures (vdWHs) with other materials. Molybdenum disulfide (MoS2) atomic layers which exhibit high carrier mobility and optical transparency are very suitable for developing ultra-broadband photodetectors to be used from surveillance and healthcare to optical communication. This review provides a brief introduction to TMD-based photodetectors, exclusively focused on MoS2-based photodetectors. The current research advances show that the photoresponse of atomic layered MoS2 can be significantly improved by boosting its charge carrier mobility and incident light absorption via forming MoS2 based plasmonic nanostructures, halide perovskites–MoS2 heterostructures, 2D–0D MoS2/quantum dots (QDs) and 2D–2D MoS2 hybrid vdWHs, chemical doping, and surface functionalization of MoS2 atomic layers. By utilizing these different integration strategies, MoS2 hybrid heterostructure-based photodetectors exhibited remarkably high photoresponsivity raging from mA W−1 up to 1010 A W−1, detectivity from 107 to 1015 Jones and a photoresponse time from seconds (s) to nanoseconds (10−9 s), varying by several orders of magnitude from deep-ultraviolet (DUV) to the long-wavelength infrared (LWIR) region. The flexible photodetectors developed from MoS2-based hybrid heterostructures with graphene, carbon nanotubes (CNTs), TMDs, and ZnO are also discussed. In addition, strain-induced and self-powered MoS2 based photodetectors have also been summarized. The factors affecting the figure of merit of a very wide range of MoS2-based photodetectors have been analyzed in terms of their photoresponsivity, detectivity, response speed, and quantum efficiency along with their measurement wavelengths and incident laser power densities. Conclusions and the future direction are also outlined on the development of MoS2 and other 2D TMD-based photodetectors.