Puqi Ning

Bio: Puqi Ning is an academic researcher from Chinese Academy of Sciences. The author has contributed to research in topics: Power module & Insulated-gate bipolar transistor. The author has an hindex of 23, co-authored 104 publications receiving 2285 citations. Previous affiliations of Puqi Ning include National Transportation Research Center & Oak Ridge National Laboratory.

A High Power Density Single-Phase PWM Rectifier With Active Ripple Energy Storage

Abstract: It is well known that single-phase pulse width modulation rectifiers have second-order harmonic currents and corresponding ripple voltages on the dc bus. The low-frequency harmonic current is normally filtered using a bulk capacitor in the bus, which results in low power density. However, pursuing high power density in converter design is a very important goal in the aerospace applications. This paper studies methods for reducing the energy storage capacitor for single-phase rectifiers. The minimum ripple energy storage requirement is derived independently of a specific topology. Based on the minimum ripple energy requirement, the feasibility of the active capacitor's reduction schemes is verified. Then, we propose a bidirectional buck-boost converter as the ripple energy storage circuit, which can effectively reduce the energy storage capacitance. The analysis and design are validated by simulation and experimental results.

A high power density single phase PWM rectifier with active ripple energy storage

Abstract: It is well known that there exist second-order harmonic current and corresponding ripple voltage on dc bus for single phase PWM rectifiers. The low frequency harmonic current is normally filtered using a bulk capacitor in the bus which results in low power density. This paper proposed an active ripple energy storage method that can effectively reduce the energy storage capacitance. The feed-forward control method and design considerations are provided. Simulation and 15kW experimental results are provided for verification purposes.

Study of Energy Storage Capacitor Reduction for Single Phase PWM Rectifier

Abstract: It is well known that there exist second-order harmonic current and corresponding ripple voltage on dc bus for single phase PWM rectifiers. The low frequency harmonic current is normally filtered using a bulk capacitor in the bus which results in low power density. This paper studies the energy storage capacitor reduction methods for single phase rectifiers. The minimum ripple energy storage requirement is derived independent of a specific topology. Based on the minimum ripple energy requirement, the feasibility of the active capacitor's reduction schemes is verified. Then, we propose a bidirectional buck-boost converter as our ripple energy storage circuit that can effectively reduce the energy storage capacitance. Simulation and experimental results are provided for verification purposes.

A High-Temperature SiC Three-Phase AC - DC Converter Design for > 100/spl deg/C Ambient Temperature

Abstract: High-temperature (HT) converters have gained importance in industrial applications where the converters operate in a harsh environment, such as in hybrid electrical vehicles, aviation, and deep-earth petroleum exploration. These environments require the converter to have not only HT semiconductor devices (made of SiC or GaN), but also reliable HT packaging, HT gate drives, and HT control electronics. This paper describes a detailed design process for an HT SiC three-phase PWM rectifier that can operate at ambient temperatures above 100°C. SiC HT planar structure packaging is designed for the main semiconductor devices, and an edge-triggered HT gate drive is also proposed to drive the designed power module. The system is designed to make use of available HT components, including the passive components, silicon-on-insulator chips, and auxiliary components. Finally, a 1.4 kW lab prototype is tested in a harsh environment for verification.

SiC Wirebond Multichip Phase-Leg Module Packaging Design and Testing for Harsh Environment

Abstract: In order to take full advantage of SiC, a high-temperature wirebond package for multichip phase-leg power module using SiC devices was designed, developed, fabricated, and tested. The details of the material comparison and selection are described, thus culminating a feasible solution for high-temperature operation. A thermal cycling test with large temperature excursion (from -55°C to 250°C) was carried out to evaluate the thermomechanical reliability of the package. During the test, the substrate failed before other parts in 20 cycles. A sealing edge approach was proposed to improve the thermal reliability of the substrate. With the strengthening of the sealing material, the substrate, die-attachment, and wirebond assemblies exhibited satisfactoriness in the thermomechanical reliability tests. In order to evaluate the high-temperature operation ability of designed package, one prototype module was designed and fabricated. The high-temperature continuous power test shows that the package presented in this paper can perform well at 250°C junction temperature.

A Survey of Wide Bandgap Power Semiconductor Devices

Abstract: Wide bandgap semiconductors show superior material properties enabling potential power device operation at higher temperatures, voltages, and switching speeds than current Si technology. As a result, a new generation of power devices is being developed for power converter applications in which traditional Si power devices show limited operation. The use of these new power semiconductor devices will allow both an important improvement in the performance of existing power converters and the development of new power converters, accounting for an increase in the efficiency of the electric energy transformations and a more rational use of the electric energy. At present, SiC and GaN are the more promising semiconductor materials for these new power devices as a consequence of their outstanding properties, commercial availability of starting material, and maturity of their technological processes. This paper presents a review of recent progresses in the development of SiC- and GaN-based power semiconductor devices together with an overall view of the state of the art of this new device generation.

Wireless Power Transfer for Electric Vehicle Applications

Abstract: Wireless power transfer (WPT) using magnetic resonance is the technology which could set human free from the annoying wires. In fact, the WPT adopts the same basic theory which has already been developed for at least 30 years with the term inductive power transfer. WPT technology is developing rapidly in recent years. At kilowatts power level, the transfer distance increases from several millimeters to several hundred millimeters with a grid to load efficiency above 90%. The advances make the WPT very attractive to the electric vehicle (EV) charging applications in both stationary and dynamic charging scenarios. This paper reviewed the technologies in the WPT area applicable to EV wireless charging. By introducing WPT in EVs, the obstacles of charging time, range, and cost can be easily mitigated. Battery technology is no longer relevant in the mass market penetration of EVs. It is hoped that researchers could be encouraged by the state-of-the-art achievements, and push forward the further development of WPT as well as the expansion of EV.

Reliability of Capacitors for DC-Link Applications in Power Electronic Converters—An Overview

Abstract: DC-link capacitors are an important part in the majority of power electronic converters which contribute to cost, size and failure rate on a considerable scale. From capacitor users' viewpoint, this paper presents a review on the improvement of reliability of dc link in power electronic converters from two aspects: 1) reliability-oriented dc-link design solutions; 2) conditioning monitoring of dc-link capacitors during operation. Failure mechanisms, failure modes and lifetime models of capacitors suitable for the applications are also discussed as a basis to understand the physics-of-failure. This review serves to provide a clear picture of the state-of-the-art research in this area and to identify the corresponding challenges and future research directions for capacitors and their dc-link applications.

Review of Silicon Carbide Power Devices and Their Applications

Abstract: Silicon carbide (SiC) power devices have been investigated extensively in the past two decades, and there are many devices commercially available now. Owing to the intrinsic material advantages of SiC over silicon (Si), SiC power devices can operate at higher voltage, higher switching frequency, and higher temperature. This paper reviews the technology progress of SiC power devices and their emerging applications. The design challenges and future trends are summarized at the end of the paper.

Review of Commercial GaN Power Devices and GaN-Based Converter Design Challenges

Abstract: Gallium nitride (GaN) power devices are an emerging technology that have only recently become available commercially. This new technology enables the design of converters at higher frequencies and efficiencies than those achievable with conventional Si devices. This paper reviews the characteristics and commercial status of both vertical and lateral GaN power devices, providing the background necessary to understand the significance of these recent developments. In addition, the challenges encountered in GaN-based converter design are considered, such as the consequences of faster switching on gate driver design and board layout. Other issues include the unique reverse conduction behavior, dynamic $R_{\mathrm {{ds}},\mathrm {{on}}}$ , breakdown mechanisms, thermal design, device availability, and reliability qualification. This review will help prepare the reader to effectively design GaN-based converters, as these devices become increasingly available on a commercial scale.