Qin Li

Bio: Qin Li is an academic researcher from Griffith University. The author has contributed to research in topics: Photocatalysis & Graphene. The author has an hindex of 52, co-authored 187 publications receiving 13933 citations. Previous affiliations of Qin Li include Wuhan University of Technology & National University of Singapore.

Highly efficient visible-light-driven photocatalytic hydrogen production of CdS-cluster-decorated graphene nanosheets.

Abstract: The production of clean and renewable hydrogen through water splitting using photocatalysts has received much attention due to the increasing global energy crises. In this study, a high efficiency of the photocatalytic H2 production was achieved using graphene nanosheets decorated with CdS clusters as visible-light-driven photocatalysts. The materials were prepared by a solvothermal method in which graphene oxide (GO) served as the support and cadmium acetate (Cd(Ac)2) as the CdS precursor. These nanosized composites reach a high H2-production rate of 1.12 mmol h–1 (about 4.87 times higher than that of pure CdS nanoparticles) at graphene content of 1.0 wt % and Pt 0.5 wt % under visible-light irradiation and an apparent quantum efficiency (QE) of 22.5% at wavelength of 420 nm. This high photocatalytic H2-production activity is attributed predominantly to the presence of graphene, which serves as an electron collector and transporter to efficiently lengthen the lifetime of the photogenerated charge carrier...

Sulfur-doped g-C3N4 with enhanced photocatalytic CO2-reduction performance

Abstract: Graphitic carbon nitride (g-C 3 N 4 ) is the most stable phase of all carbon nitride allotropes under ambient conditions. In this study, sulfur-doped g-C 3 N 4 was fabricated by simply calcinating thiourea at 520 °C. Sulfur-doped g-C 3 N 4 (TCN) was found to absorb light up to 475 nm corresponding to a band gap of 2.63 eV, which was narrower than that of un-doped g-C 3 N 4 (MCN) with a band gap of 2.7 eV. First-principle calculations based on spin-polarized density functional theory were utilized to investigate the theoretical partial density of states of the TCN and MCN, indicating that the band gaps of TCN and MCN were the same, but impurities existed in the TCN sample. Consequently, photogenerated electrons could easily jump from the impurity state to the conduction band or from the valence band to the impurity state. Photocatalytic CO 2 reduction was further used to evaluate the photoactivity of samples, and the CH 3 OH yield using TCN and MCN were 1.12 and 0.81 μmol g −1 , respectively. PL spectrum analysis and transient photocurrent responses were also carried out to verify the suggested photocatalysis mechanism.

Nitrogen-containing microporous carbon nanospheres with improved capacitive properties

Abstract: We report the largely improved electrochemical capacitance of polypyrrole-derived microporous carbon nanospheres (MCNs, 80–100 nm in diameter) containing nitrogen functional groups. We have investigated the electrochemical properties of precursor polypyrrole nanospheres (PNs, with a high N/C ratio and low surface area) and as-derived carbon nanospheres (CNs, with a moderate N/C ratio and low surface area) prepared by carbonizing PNs at different temperatures, and MCNs (with a low N/C ratio and high surface area) obtained by chemical activation of CNs. The samples are thoroughly characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), Raman spectroscopy, thermogravimetric analysis (TGA), nitrogen sorption, elemental analysis, and X-ray photoelectron spectroscopy (XPS). It is found that MCNs with a high surface area and N-doping species exhibit much better capacitive performance compared to the PNs and CNs, and commercial carbon blacks (XC-72 and BP2000) as well. The MCN sample gives a reversible specific capacitance of ∼240 F g−1 for 3000 cycles in aqueous media as a result of combined advantages of high electrochemical activity of doped heteroatoms (N and O) and accessible well-developed porosity, demonstrating the promising use in high-energy-density supercapacitors.

Visible Light Photocatalytic H2-Production Activity of CuS/ZnS Porous Nanosheets Based on Photoinduced Interfacial Charge Transfer

Abstract: Visible light photocatalytic H2 production through water splitting is of great importance for its potential application in converting solar energy into chemical energy. In this study, a novel visible-light-driven photocatalyst was designed based on photoinduced interfacial charge transfer (IFCT) through surface modification of ZnS porous nanosheets by CuS. CuS/ZnS porous nanosheet photocatalysts were prepared by a simple hydrothermal and cation exchange reaction between preformed ZnS(en)0.5 nanosheets and Cu(NO3)2. Even without a Pt cocatalyst, the as-prepared CuS/ZnS porous nanosheets reach a high H2-production rate of 4147 μmol h–1 g–1 at CuS loading content of 2 mol % and an apparent quantum efficiency of 20% at 420 nm. This high visible light photocatalytic H2-production activity is due to the IFCT from the valence band of ZnS to CuS, which causes the reduction of partial CuS to Cu2S and thus enhances H2-production activity. This work not only shows a possibility for substituting low-cost CuS for nobl...

An Aqueous Route to Multicolor Photoluminescent Carbon Dots Using Silica Spheres as Carriers

Abstract: Carbon lights up: A facile chemical method yields multicolor photoluminescent carbon dots derived from polymer/silica nanocomposites, which were prepared using surfactant-modified silica spheres as carriers and resols (phenol/formaldehyde resins) as carbon precursor (see picture). The surface-passivated carbon dots show good biocompatibility as potential bioimaging agents offering nanometer-scale resolution.

Graphitic Carbon Nitride (g-C3N4)-Based Photocatalysts for Artificial Photosynthesis and Environmental Remediation: Are We a Step Closer To Achieving Sustainability?

Abstract: As a fascinating conjugated polymer, graphitic carbon nitride (g-C3N4) has become a new research hotspot and drawn broad interdisciplinary attention as a metal-free and visible-light-responsive photocatalyst in the arena of solar energy conversion and environmental remediation. This is due to its appealing electronic band structure, high physicochemical stability, and “earth-abundant” nature. This critical review summarizes a panorama of the latest progress related to the design and construction of pristine g-C3N4 and g-C3N4-based nanocomposites, including (1) nanoarchitecture design of bare g-C3N4, such as hard and soft templating approaches, supramolecular preorganization assembly, exfoliation, and template-free synthesis routes, (2) functionalization of g-C3N4 at an atomic level (elemental doping) and molecular level (copolymerization), and (3) modification of g-C3N4 with well-matched energy levels of another semiconductor or a metal as a cocatalyst to form heterojunction nanostructures. The constructi...

Luminescent Carbon Nanodots: Emergent Nanolights

Abstract: Similar to its popular older cousins the fullerene, the carbon nanotube, and graphene, the latest form of nanocarbon, the carbon nanodot, is inspiring intensive research efforts in its own right. These surface-passivated carbonaceous quantum dots, so-called C-dots, combine several favorable attributes of traditional semiconductor-based quantum dots (namely, size- and wavelength-dependent luminescence emission, resistance to photobleaching, ease of bioconjugation) without incurring the burden of intrinsic toxicity or elemental scarcity and without the need for stringent, intricate, tedious, costly, or inefficient preparation steps. C-dots can be produced inexpensively and on a large scale (frequently using a one-step pathway and potentially from biomass waste-derived sources) by many approaches, ranging from simple candle burning to in situ dehydration reactions to laser ablation methods. In this Review, we summarize recent advances in the synthesis and characterization of C-dots. We also speculate on their future and discuss potential developments for their use in energy conversion/storage, bioimaging, drug delivery, sensors, diagnostics, and composites.

Recent Advances in Ultrathin Two-Dimensional Nanomaterials

Abstract: Since the discovery of mechanically exfoliated graphene in 2004, research on ultrathin two-dimensional (2D) nanomaterials has grown exponentially in the fields of condensed matter physics, material science, chemistry, and nanotechnology. Highlighting their compelling physical, chemical, electronic, and optical properties, as well as their various potential applications, in this Review, we summarize the state-of-art progress on the ultrathin 2D nanomaterials with a particular emphasis on their recent advances. First, we introduce the unique advances on ultrathin 2D nanomaterials, followed by the description of their composition and crystal structures. The assortments of their synthetic methods are then summarized, including insights on their advantages and limitations, alongside some recommendations on suitable characterization techniques. We also discuss in detail the utilization of these ultrathin 2D nanomaterials for wide ranges of potential applications among the electronics/optoelectronics, electrocat...

Carbon quantum dots and their applications

Abstract: Fluorescent carbon nanoparticles or carbon quantum dots (CQDs) are a new class of carbon nanomaterials that have emerged recently and have garnered much interest as potential competitors to conventional semiconductor quantum dots. In addition to their comparable optical properties, CQDs have the desired advantages of low toxicity, environmental friendliness low cost and simple synthetic routes. Moreover, surface passivation and functionalization of CQDs allow for the control of their physicochemical properties. Since their discovery, CQDs have found many applications in the fields of chemical sensing, biosensing, bioimaging, nanomedicine, photocatalysis and electrocatalysis. This article reviews the progress in the research and development of CQDs with an emphasis on their synthesis, functionalization and technical applications along with some discussion on challenges and perspectives in this exciting and promising field.