Qingsong Shan

Bio: Qingsong Shan is an academic researcher from Nanjing University of Science and Technology. The author has contributed to research in topics: Perovskite (structure) & Materials science. The author has an hindex of 11, co-authored 18 publications receiving 2017 citations. Previous affiliations of Qingsong Shan include Zhengzhou University.

50-Fold EQE Improvement up to 6.27% of Solution-Processed All-Inorganic Perovskite CsPbBr3 QLEDs via Surface Ligand Density Control

Abstract: Solution-processed CsPbBr3 quantum-dot light-emitting diodes with a 50-fold external quantum efficiency improvement (up to 6.27%) are achieved through balancing surface passivation and carrier injection via ligand density control (treating with hexane/ethyl acetate mixed solvent), which induces the coexistence of high levels of ink stability, photoluminescence quantum yields, thin-film uniformity, and carrier-injection efficiency.

Room-Temperature Triple-Ligand Surface Engineering Synergistically Boosts Ink Stability, Recombination Dynamics, and Charge Injection toward EQE-11.6% Perovskite QLEDs

Abstract: Developing low-cost and high-quality quantum dots (QDs) or nanocrystals (NCs) and their corresponding efficient light-emitting diodes (LEDs) is crucial for the next-generation ultra-high-definition flexible displays. Here, there is a report on a room-temperature triple-ligand surface engineering strategy to play the synergistic role of short ligands of tetraoctylammonium bromide (TOAB), didodecyldimethylammonium bromide (DDAB), and octanoic acid (OTAc) toward "ideal" perovskite QDs with a high photoluminescence quantum yield (PLQY) of >90%, unity radiative decay in its intrinsic channel, stable ink characteristics, and effective charge injection and transportation in QD films, resulting in the highly efficient QD-based LEDs (QLEDs). Furthermore, the QD films with less nonradiative recombination centers exhibit improved PL properties with a PLQY of 61% through dopant engineering in A-site. The robustness of such properties is demonstrated by the fabrication of green electroluminescent LEDs based on CsPbBr3 QDs with the peak external quantum efficiency (EQE) of 11.6%, and the corresponding peak internal quantum efficiency (IQE) and power efficiency are 52.2% and 44.65 lm W-1 , respectively, which are the most-efficient perovskite QLEDs with colloidal CsPbBr3 QDs as emitters up to now. These results demonstrate that the as-obtained QD inks have a wide range application in future high-definition QD displays and high-quality lightings.

Organic-Inorganic Hybrid Passivation Enables Perovskite QLEDs with an EQE of 16.48.

Abstract: Perovskite quantum dots (QDs) with high photoluminescence quantum yields (PLQYs) and narrow emission peak hold promise for next-generation flexible and high-definition displays. However, perovskite QD films often suffer from low PLQYs due to the dynamic characteristics between the QD's surface and organic ligands and inefficient electrical transportation resulting from long hydrocarbon organic ligands as highly insulating barrier, which impair the ensuing device performance. Here, a general organic-inorganic hybrid ligand (OIHL) strategy is reported on to passivate perovskite QDs for highly efficient electroluminescent devices. Films based on QDs through OIHLs exhibit enhanced radiative recombination and effective electrical transportation properties compared to the primal QDs. After the OIHL passivation, QD-based light-emitting diodes (QLEDs) exhibit a maximum peak external quantum efficiency (EQE) of 16.48%, which is the most efficient electroluminescent device in the field of perovskite-based LEDs up to date. The proposed OIHL passivation strategy positions perovskite QDs as an extremely promising prospect in future applications of high-definition displays, high-quality lightings, as well as solar cells.

Double-Protected All-Inorganic Perovskite Nanocrystals by Crystalline Matrix and Silica for Triple-Modal Anti-Counterfeiting Codes

Abstract: Novel fluorescence with highly covert and reliable features is quite desirable to combat the sophisticated counterfeiters. Herein, we report a simultaneously triple-modal fluorescent characteristic of CsPbBr3@Cs4PbBr6/SiO2 by the excitation of thermal, ultraviolet (UV) and infrared (IR) light for the first time, which can be applied for the multiple modal anti-counterfeiting codes. The diphasic structure CsPbBr3@Cs4PbBr6 nanocrystals (NCs) was synthesized via the typical reprecipitation method followed by uniformly encapsulation into silica microspheres. Cubic CsPbBr3 is responsible for the functions of anti-counterfeiting, while Cs4PbBr6 crystalline and SiO2 are mainly to protect unstable CsPbBr3 NCs from being destroyed by ambient conditions. The as-prepared CsPbBr3@Cs4PbBr6/SiO2 NCs possess improved stability and are capable of forming printable ink with organic binders for patterns. Interestingly, the fluorescence of diphasic CsPbBr3@Cs4PbBr6/SiO2 capsule patterns can be reversibly switched by the hea...

High Performance Metal Halide Perovskite Light-Emitting Diode: From Material Design to Device Optimization

Abstract: Metal halide perovskites have drawn significant interest in the past decade. Superior optoelectronic properties, such as a narrow bandwidth, precise and facile tunable luminance over the entire visible spectrum, and high photoluminescence quantum yield of up to ≈100%, render metal halide perovskites suitable for next-generation high-definition displays and healthy lighting systems. The external quantum efficiency of perovskite light-emitting diodes (LEDs) increases from 0.1 to 11.7% in three years; however, the energy conversion efficiency and the long-term stability of perovskite LEDs are inadequate for practical application. Strategies to optimize the emitting layer and the device structure, with respect to material design, synthesis, surface passivation, and device optimization, are reviewed and highlighted. The long-term stability of perovskite LEDs is evaluated as well. Meanwhile, several challenges and prospects for future development of perovskite materials and LEDs are identified.

Perovskite light-emitting diodes with external quantum efficiency exceeding 20 per cent

Abstract: Metal halide perovskite materials are an emerging class of solution-processable semiconductors with considerable potential for use in optoelectronic devices1–3. For example, light-emitting diodes (LEDs) based on these materials could see application in flat-panel displays and solid-state lighting, owing to their potential to be made at low cost via facile solution processing, and could provide tunable colours and narrow emission line widths at high photoluminescence quantum yields4–8. However, the highest reported external quantum efficiencies of green- and red-light-emitting perovskite LEDs are around 14 per cent7,9 and 12 per cent8, respectively—still well behind the performance of organic LEDs10–12 and inorganic quantum dot LEDs13. Here we describe visible-light-emitting perovskite LEDs that surpass the quantum efficiency milestone of 20 per cent. This achievement stems from a new strategy for managing the compositional distribution in the device—an approach that simultaneously provides high luminescence and balanced charge injection. Specifically, we mixed a presynthesized CsPbBr3 perovskite with a MABr additive (where MA is CH3NH3), the differing solubilities of which yield sequential crystallization into a CsPbBr3/MABr quasi-core/shell structure. The MABr shell passivates the nonradiative defects that would otherwise be present in CsPbBr3 crystals, boosting the photoluminescence quantum efficiency, while the MABr capping layer enables balanced charge injection. The resulting 20.3 per cent external quantum efficiency represents a substantial step towards the practical application of perovskite LEDs in lighting and display. A strategy for managing the compositional distribution in metal halide perovskite light-emitting diodes enables them to surpass 20% external quantum efficiency—a step towards their practical application in lighting and displays.

Properties and potential optoelectronic applications of lead halide perovskite nanocrystals

Abstract: Semiconducting lead halide perovskites (LHPs) have not only become prominent thin-film absorber materials in photovoltaics but have also proven to be disruptive in the field of colloidal semiconductor nanocrystals (NCs). The most important feature of LHP NCs is their so-called defect-tolerance—the apparently benign nature of structural defects, highly abundant in these compounds, with respect to optical and electronic properties. Here, we review the important differences that exist in the chemistry and physics of LHP NCs as compared with more conventional, tetrahedrally bonded, elemental, and binary semiconductor NCs (such as silicon, germanium, cadmium selenide, gallium arsenide, and indium phosphide). We survey the prospects of LHP NCs for optoelectronic applications such as in television displays, light-emitting devices, and solar cells, emphasizing the practical hurdles that remain to be overcome.

Genesis, challenges and opportunities for colloidal lead halide perovskite nanocrystals

Abstract: Lead halide perovskites (LHPs) in the form of nanometre-sized colloidal crystals, or nanocrystals (NCs), have attracted the attention of diverse materials scientists due to their unique optical versatility, high photoluminescence quantum yields and facile synthesis. LHP NCs have a 'soft' and predominantly ionic lattice, and their optical and electronic properties are highly tolerant to structural defects and surface states. Therefore, they cannot be approached with the same experimental mindset and theoretical framework as conventional semiconductor NCs. In this Review, we discuss LHP NCs historical and current research pursuits, challenges in applications, and the related present and future mitigation strategies explored.

Anion-exchange red perovskite quantum dots with ammonium iodine salts for highly efficient light-emitting devices

Abstract: Perovskite quantum dots have significant potential for light-emitting devices because of their high colour purity and colour tunability in the visible spectrum. Here, we report highly efficient red perovskite quantum dot-based light-emitting devices. The quantum dots were fabricated by anion exchange from pristine CsPbBr3 using halide-anion-containing alkyl ammonium and aryl ammonium salts. Anion-exchange quantum dots based on ammonium iodine salts exhibited a strong redshift from green emission to a deep-red emission at 649 nm as well as higher photoluminescence quantum yields. Furthermore, the quantum dot-based light-emitting device with the alkyl ammonium iodine salt exhibited an external quantum efficiency of 21.3% and high colour purity, with Commission Internationale de l’Eclairage coordinates of (0.72, 0.28), while the light-emitting device with the aryl ammonium iodine salt showed an external quantum efficiency of 14.1%. Finally, the operational stability of the latter was 36 times higher because the surface ligand density of the corresponding quantum dots was lower. Perovskite quantum dots (QDs) are synthesized via an anion-exchange process where CsPbBr3 is used to realize a highly efficient red light-emitting diode (LED). The perovskite QD-based LED exhibits the highest external quantum efficiency of more than 20% compared with perovskite LEDs.

Metal Halide Perovskite Nanocrystals: Synthesis, Post-Synthesis Modifications and Their Optical Properties

Abstract: Metal halide perovskites represent a flourishing area of research, driven by both their potential application in photo-voltaics and optoelectronics, and for the fundamental science underpinning their unique optoelectronic properties. The advent of colloidal methods for the synthesis of halide perovskite nanocrystals has brought to the attention inter-esting aspects of this new type of materials, above all their defect-tolerance. This review aims to provide an updated survey of this fast-moving field, with a main focus on their colloidal synthesis. We examine the chemistry and the ca-pability of different colloidal synthetic routes to control the shape, size and optical properties of the resulting nano-crystals. We also provide an up to date overview of their post-synthesis transformations, and summarize the various so-lution processes aimed at fabricating halide perovskite-based nanocomposites. We then review the fundamental optical properties of halide perovskite nanocrystals, by focusing on their linear optical properties, on the effects of quantum confinement and, then, on the current knowledge of their exciton binding energies. We also discuss the emergence of non-linear phenomena such as multiphoton absorption, biexcitons and carrier multiplication. At last, we provide an outlook in the field, with the most cogent open questions and possible future directions.