scispace - formally typeset
Search or ask a question
Author

Qundong Fu

Bio: Qundong Fu is an academic researcher from Nanyang Technological University. The author has contributed to research in topics: van der Waals force & Perovskite (structure). The author has an hindex of 23, co-authored 33 publications receiving 2414 citations. Previous affiliations of Qundong Fu include Centre national de la recherche scientifique.

Papers
More filters
Journal ArticleDOI
01 Apr 2018-Nature
TL;DR: Molten-salt-assisted chemical vapour deposition is used to synthesize a wide variety of two-dimensional transition-metal chalcogenides and elaborate how the salt decreases the melting point of the reactants and facilitates the formation of intermediate products, increasing the overall reaction rate.
Abstract: Investigations of two-dimensional transition-metal chalcogenides (TMCs) have recently revealed interesting physical phenomena, including the quantum spin Hall effect1,2, valley polarization3,4 and two-dimensional superconductivity 5 , suggesting potential applications for functional devices6–10. However, of the numerous compounds available, only a handful, such as Mo- and W-based TMCs, have been synthesized, typically via sulfurization11–15, selenization16,17 and tellurization 18 of metals and metal compounds. Many TMCs are difficult to produce because of the high melting points of their metal and metal oxide precursors. Molten-salt-assisted methods have been used to produce ceramic powders at relatively low temperature 19 and this approach 20 was recently employed to facilitate the growth of monolayer WS2 and WSe2. Here we demonstrate that molten-salt-assisted chemical vapour deposition can be broadly applied for the synthesis of a wide variety of two-dimensional (atomically thin) TMCs. We synthesized 47 compounds, including 32 binary compounds (based on the transition metals Ti, Zr, Hf, V, Nb, Ta, Mo, W, Re, Pt, Pd and Fe), 13 alloys (including 11 ternary, one quaternary and one quinary), and two heterostructured compounds. We elaborate how the salt decreases the melting point of the reactants and facilitates the formation of intermediate products, increasing the overall reaction rate. Most of the synthesized materials in our library are useful, as supported by evidence of superconductivity in our monolayer NbSe2 and MoTe2 samples21,22 and of high mobilities in MoS2 and ReS2. Although the quality of some of the materials still requires development, our work opens up opportunities for studying the properties and potential application of a wide variety of two-dimensional TMCs.

1,174 citations

Journal ArticleDOI
TL;DR: In this article, a linear dichroic photodetection with a high photoresponsivity was proposed for light polarization detection using a few-layer ReS2 transistor with an n-type behavior with the mobility of about 40 cm2 V−1 s−1 and on/off ratio of 105.
Abstract: Due to the novel optical and optoelectronic properties, 2D materials have received increasing interests for optoelectronics applications. Discovering new properties and functionalities of 2D materials is challenging yet promising. Here broadband polarization sensitive photodetectors based on few layer ReS2 are demonstrated. The transistor based on few layer ReS2 shows an n-type behavior with the mobility of about 40 cm2 V−1 s−1 and on/off ratio of 105. The polarization dependence of photoresponse is ascribed to the unique anisotropic in-plane crystal structure, consistent with the optical absorption anisotropy. The linear dichroic photodetection with a high photoresponsivity reported here demonstrates a route to exploit the intrinsic anisotropy of 2D materials and the possibility to open up new ways for the applications of 2D materials for light polarization detection.

343 citations

Journal ArticleDOI
TL;DR: Exploiting a novel multigated architecture incorporating electrical and optical biases, this incarnation not only addresses different charge‐trapping probabilities to finely modulate the synaptic weights, but also amalgamates neuromodulation schemes to achieve “plasticity of plasticity–metaplasticITY” via dynamic control of Hebbian spike‐time dependent plasticity and homeostatic regulation.
Abstract: Emulation of brain-like signal processing with thin-film devices can lay the foundation for building artificially intelligent learning circuitry in future. Encompassing higher functionalities into single artificial neural elements will allow the development of robust neuromorphic circuitry emulating biological adaptation mechanisms with drastically lesser neural elements, mitigating strict process challenges and high circuit density requirements necessary to match the computational complexity of the human brain. Here, 2D transition metal di-chalcogenide (MoS2 ) neuristors are designed to mimic intracellular ion endocytosis-exocytosis dynamics/neurotransmitter-release in chemical synapses using three approaches: (i) electronic-mode: a defect modulation approach where the traps at the semiconductor-dielectric interface are perturbed; (ii) ionotronic-mode: where electronic responses are modulated via ionic gating; and (iii) photoactive-mode: harnessing persistent photoconductivity or trap-assisted slow recombination mechanisms. Exploiting a novel multigated architecture incorporating electrical and optical biases, this incarnation not only addresses different charge-trapping probabilities to finely modulate the synaptic weights, but also amalgamates neuromodulation schemes to achieve "plasticity of plasticity-metaplasticity" via dynamic control of Hebbian spike-time dependent plasticity and homeostatic regulation. Coexistence of such multiple forms of synaptic plasticity increases the efficacy of memory storage and processing capacity of artificial neuristors, enabling design of highly efficient novel neural architectures.

246 citations

Journal ArticleDOI
TL;DR: The high performance of the phototransistor shown here together with the developed unique transfer technique are promising for the development of novel 2D-material-based optoelectronic applications as well as integrating with state-of-the-art silicon photonic and electronic technologies.
Abstract: 2D materials are considered as intriguing building blocks for next-generation optoelectronic devices. However, their photoresponse performance still needs to be improved for practical applications. Here, ultrasensitive 2D phototransistors are reported employing chemical vapor deposition (CVD)-grown 2D Bi2 O2 Se transferred onto silicon substrates with a noncorrosive transfer method. The as-transferred Bi2 O2 Se preserves high quality in contrast to the serious quality degradation in hydrofluoric-acid-assisted transfer. The phototransistors show a responsivity of 3.5 × 104 A W-1 , a photoconductive gain of more than 104 , and a time response in the order of sub-millisecond. With back gating of the silicon substrate, the dark current can be reduced to several pA. This yields an ultrahigh sensitivity with a specific detectivity of 9.0 × 1013 Jones, which is one of the highest values among 2D material photodetectors and two orders of magnitude higher than that of other CVD-grown 2D materials. The high performance of the phototransistor shown here together with the developed unique transfer technique are promising for the development of novel 2D-material-based optoelectronic applications as well as integrating with state-of-the-art silicon photonic and electronic technologies.

171 citations

Journal ArticleDOI
TL;DR: In this paper, the authors reported the controlled synthesis of atomically thin 1T-TaS2, a typical charge density wave material, by a chemical vapor deposition (CVD) method.
Abstract: The charge density wave (CDW) in two-dimensional (2D) materials is attracting substantial interest because of its magnificent many-body collective phenomena. Various CDW phases have been observed in several 2D materials before they reach the phase of superconductivity. However, to date, the atomically thin CDW materials were mainly fabricated by mechanically exfoliating from their bulk counterparts, which leads to low production yield and small sample sizes. Here, we report the controlled synthesis of atomically thin 1T-TaS2, a typical CDW material, by a chemical vapor deposition (CVD) method. The high quality of as-grown 1T-TaS2 has been confirmed by complementary characterization technologies. Moreover, the thickness-dependent CDW phase transitions have been revealed in these ultrathin flakes by temperature-dependent Raman spectra. This work opens up a new window for the large-scale synthesis of ultrathin CDW materials and sheds light on the fabrication of next-generation electronic devices.

147 citations


Cited by
More filters
Journal ArticleDOI
TL;DR: The unique advances on ultrathin 2D nanomaterials are introduced, followed by the description of their composition and crystal structures, and the assortments of their synthetic methods are summarized.
Abstract: Since the discovery of mechanically exfoliated graphene in 2004, research on ultrathin two-dimensional (2D) nanomaterials has grown exponentially in the fields of condensed matter physics, material science, chemistry, and nanotechnology. Highlighting their compelling physical, chemical, electronic, and optical properties, as well as their various potential applications, in this Review, we summarize the state-of-art progress on the ultrathin 2D nanomaterials with a particular emphasis on their recent advances. First, we introduce the unique advances on ultrathin 2D nanomaterials, followed by the description of their composition and crystal structures. The assortments of their synthetic methods are then summarized, including insights on their advantages and limitations, alongside some recommendations on suitable characterization techniques. We also discuss in detail the utilization of these ultrathin 2D nanomaterials for wide ranges of potential applications among the electronics/optoelectronics, electrocat...

3,628 citations

01 Jun 2005

3,154 citations

Journal ArticleDOI
TL;DR: In this paper, the authors review the recent progress and challenges of 2D van der Waals interactions and offer a perspective on the exploration of 2DLM-based vdWHs for future application in electronics and optoelectronics.
Abstract: Two-dimensional layered materials (2DLMs) have been a central focus of materials research since the discovery of graphene just over a decade ago. Each layer in 2DLMs consists of a covalently bonded, dangling-bond-free lattice and is weakly bound to neighbouring layers by van der Waals interactions. This makes it feasible to isolate, mix and match highly disparate atomic layers to create a wide range of van der Waals heterostructures (vdWHs) without the constraints of lattice matching and processing compatibility. Exploiting the novel properties in these vdWHs with diverse layering of metals, semiconductors or insulators, new designs of electronic devices emerge, including tunnelling transistors, barristors and flexible electronics, as well as optoelectronic devices, including photodetectors, photovoltaics and light-emitting devices with unprecedented characteristics or unique functionalities. We review the recent progress and challenges, and offer our perspective on the exploration of 2DLM-based vdWHs for future application in electronics and optoelectronics. With a dangling-bond-free surface, two dimensional layered materials (2DLMs) can enable the creation of diverse van der Waals heterostructures (vdWHs) without the conventional constraint of lattice matching or process compatibility. This Review discusses the recent advances in exploring 2DLM vdWHs for future electronics and optoelectronics.

1,850 citations