R. Glynn Holt

Bio: R. Glynn Holt is an academic researcher from Boston University. The author has contributed to research in topics: Cavitation & Bubble. The author has an hindex of 18, co-authored 95 publications receiving 1676 citations. Previous affiliations of R. Glynn Holt include Yale University & University of Mississippi.

Measurements of bubble-enhanced heating from focused, MHz-frequency ultrasound in a tissue-mimicking material.

Abstract: Time-resolved measurements of the temperature field in an agar-based tissue-mimicking phantom insonated with a large aperture 1-MHz focused acoustic transducer are reported. The acoustic pressure amplitude and insonation duration were varied. Above a critical threshold acoustic pressure, a large increase in the temperature rise during insonation was observed. Evidence for the hypothesis that cavitation bubble activity in the focal zone is the cause of enhanced heating is presented and discussed. Mechanisms for bubble-assisted heating are presented and modeled, and quantitative estimates for the thermal power generated by viscous dissipation and bubble acoustic radiation are given.

Experimental validation of a tractable numerical model for focused ultrasound heating in flow-through tissue phantoms.

Abstract: Heating from high intensity focused ultrasound (HIFU) can be used to control bleeding, both from individual blood vessels as well as from gross damage to the capillary bed. The presence of vascularity can limit one’s ability to elevate the temperature owing to convective heat transport. In an effort to better understand the heating process in tissues with vascular structure we have developed a numerical simulation that couples models for ultrasound propagation, acoustic streaming, ultrasound heating and blood cooling in a Newtonian viscous medium. The 3-D simulation allows for the study of complicated biological structures and insonation geometries. We have also undertaken a series of in vitro experiments employing non-uniform flow-through tissue phantoms and designed to provide verification of the model predictions. We show that blood flow of 2 cm/s (6.4 ml/min through a 2.6 mm ‘vessel’) can reduce peak temperature in a vessel wall by 25%. We also show that HIFU intensities of 6.5×105 W/m2 can induce acoustic streaming with peak velocities up to 5 cm/s and this can reduce heating near a vessel wall by more than 10%. These results demonstrate that convective cooling is important in HIFU and can be accounted for within simulation models.

Temporal and Spatial Detection of HIFU-Induced Inertial and Hot-Vapor Cavitation with a Diagnostic Ultrasound System

Abstract: The onset and presence of inertial cavitation and near-boiling temperatures in high-intensity focused ultrasound (HIFU) therapy have been identified as important indicators of energy deposition for therapy guidance. Passive cavitation detection is commonly used to detect bubble emissions, where a fixed-focus single-element acoustic transducer is typically used as a passive cavitation detector (PCD). This technique is suboptimal for clinical applications, because most PCD transducers are tightly focused and afford limited spatial coverage of the HIFU focal region. A Terason 2000 Ultrasound System was used as a PCD array to expand the spatial detection region for cavitation by operating in passive mode, obtaining the radiofrequency signals corresponding to each scan line and filtering the contribution from scattering of the HIFU signal harmonics. This approach allows for spatially resolved detection of both inertial and stable cavitation throughout the focal region. Measurements with the PCD array during sonication with a 1.1-MHz HIFU source in tissue phantoms were compared with single-element PCD and thermocouple sensing. Stable cavitation signals at the harmonics and superharmonics increased in a threshold fashion for temperatures >90 degrees C, an effect attributed to high vapor pressure in the cavities. Incorporation of these detection techniques in a diagnostic ultrasound platform could result in a powerful tool for improving HIFU guidance and treatment.

Horn-like space-coiling metamaterials toward simultaneous phase and amplitude modulation.

Abstract: Acoustic metasurfaces represent a family of planar wavefront-shaping devices garnering increasing attention due to their capacity for novel acoustic wave manipulation. By precisely tailoring the geometry of these engineered surfaces, the effective refractive index may be modulated and, consequently, acoustic phase delays tuned. Despite the successful demonstration of phase engineering using metasurfaces, amplitude modulation remains overlooked. Herein, we present a class of metasurfaces featuring a horn-like space-coiling structure, enabling acoustic control with simultaneous phase and amplitude modulation. The functionality of this class of metasurfaces, featuring a gradient in channel spacing, has been investigated theoretically and numerically and an equivalent model simplifying the structural behavior is presented. A metasurface featuring this geometry has been designed and its functionality in modifying acoustic radiation patterns experimentally validated. This class of acoustic metasurface provides an efficient design methodology enabling complete acoustic wave manipulation, which may find utility in applications including biomedical imaging, acoustic communication, and non-destructive testing.

Nucleating cavitation from laser-illuminated nano-particles

Abstract: Vapor bubble generation from laser-illuminated gold nano-particles has been investigated as a means of providing nucleation sites for cavitation induced by high-intensity focused ultrasound (HIFU). Pulses from a 532-nm Nd:Yag laser were synchronized with a pulsed 1.1-MHz HIFU source in an acrylamide phantom seeded with 82-nm-diameter gold particles. Emissions from bubble collapses were detected by a 15-MHz focused transducer at a laser pulse energy and HIFU focal pressure of 0.10 mJ and 0.92 MPa, respectively. In comparison, a HIFU peak focal pressure of 4.50 MPa was required to nucleate detectable cavitation without laser illumination.

Smoothed Particle Hydrodynamics (SPH): an Overview and Recent Developments

Abstract: Smoothed particle hydrodynamics (SPH) is a meshfree particle method based on Lagrangian formulation, and has been widely applied to different areas in engineering and science. This paper presents an overview on the SPH method and its recent developments, including (1) the need for meshfree particle methods, and advantages of SPH, (2) approximation schemes of the conventional SPH method and numerical techniques for deriving SPH formulations for partial differential equations such as the Navier-Stokes (N-S) equations, (3) the role of the smoothing kernel functions and a general approach to construct smoothing kernel functions, (4) kernel and particle consistency for the SPH method, and approaches for restoring particle consistency, (5) several important numerical aspects, and (6) some recent applications of SPH. The paper ends with some concluding remarks.

Microscale acoustofluidics: Microfluidics driven via acoustics and ultrasonics

Abstract: This article reviews acoustic microfiuidics: the use of acoustic fields, principally ultrasonics, for application in microfiuidics. Although acoustics is a classical field, its promising, and indeed perplexing, capabilities in powerfully manipulating both fluids and particles within those fluids on the microscale to nanoscale has revived interest in it. The bewildering state of the literature and ample jargon from decades of research is reorganized and presented in the context of models derived from first principles. This hopefully will make the area accessible for researchers with experience in materials science, fluid mechanics, or dynamics. The abundance of interesting phenomena arising from nonlinear interactions in ultrasound that easily appear at these small scales is considered, especially in surface acoustic wave devices that are simple to fabricate with planar lithography techniques common in microfluidics, along with the many applications in microfluidics and nanofluidics that appear through the literature.

Single bubble sonoluminescence

Abstract: Single-bubble sonoluminescence occurs when an acoustically trapped and periodically driven gas bubble collapses so strongly that the energy focusing at collapse leads to light emission. Detailed experiments have demonstrated the unique properties of this system: the spectrum of the emitted light tends to peak in the ultraviolet and depends strongly on the type of gas dissolved in the liquid; small amounts of trace noble gases or other impurities can dramatically change the amount of light emission, which is also affected by small changes in other operating parameters (mainly forcing pressure, dissolved gas concentration, and liquid temperature). This article reviews experimental and theoretical efforts to understand this phenomenon. The currently available information favors a description of sonoluminescence caused by adiabatic heating of the bubble at collapse, leading to partial ionization of the gas inside the bubble and to thermal emission such as bremsstrahlung. After a brief historical review, the authors survey the major areas of research: Section II describes the classical theory of bubble dynamics, as developed by Rayleigh, Plesset, Prosperetti, and others, while Sec. III describes research on the gas dynamics inside the bubble. Shock waves inside the bubble do not seem to play a prominent role in the process. Section IV discusses the hydrodynamic and chemical stability of the bubble. Stable single-bubble sonoluminescence requires that the bubble be shape stable and diffusively stable, and, together with an energy focusing condition, this fixes the parameter space where light emission occurs. Section V describes experiments and models addressing the origin of the light emission. The final section presents an overview of what is known, and outlines some directions for future research.

High intensity focused ultrasound: physical principles and devices.

Abstract: High intensity focused ultrasound (HIFU) is gaining rapid clinical acceptance as a treatment modality enabling non-invasive tissue heating and ablation for numerous applications. HIFU treatments are usually carried out in a single session, often as a day case procedure, with the patient either fully conscious, lightly sedated or under light general anaesthesia. A major advantage of HIFU over other thermal ablation techniques is that there is no necessity for the transcutaneous insertion of probes into the target tissue. The high powered focused beams employed are generated from sources placed either outside the body (for treatment of tumours of the liver, kidney, breast, uterus, pancreas and bone) or in the rectum (for treatment of the prostate), and are designed to enable rapid heating of a target tissue volume, while leaving tissue in the ultrasound propagation path relatively unaffected. Given the wide-ranging applicability of HIFU, numerous extra-corporeal, transrectal and interstitial devices have been designed to optimise application-specific treatment delivery. Their principle of operation is described here, alongside an overview of the physical mechanisms governing HIFU propagation and HIFU-induced heating. Present methods of characterising HIFU fields and of quantifying HIFU exposure and its associated effects are also addressed.

Physics of bubble oscillations

Abstract: Bubbles in liquids, soft and squeezy objects made of gas and vapour, yet so strong as to destroy any material and so mysterious as at times turning into tiny light bulbs, are the topic of the present report. Bubbles respond to pressure forces and reveal their full potential when periodically driven by sound waves. The basic equations for nonlinear bubble oscillation in sound fields are given, together with a survey of typical solutions. A bubble in a liquid can be considered as a representative example from nonlinear dynamical systems theory with its resonances, multiple attractors with their basins, bifurcations to chaos and not yet fully describable behaviour due to infinite complexity. Three stability conditions are treated for stable trapping of bubbles in standing sound fields: positional, spherical and diffusional stability. Chemical reactions may become important in that respect, when reacting gases fill the bubble, but the chemistry of bubbles is just touched upon and is beyond the scope of the present report. Bubble collapse, the runaway shrinking of a bubble, is presented in its current state of knowledge. Pressures and temperatures that are reached at this occasion are discussed, as well as the light emission in the form of short flashes. Aspherical bubble collapse, as for instance enforced by boundaries nearby, mitigates most of the phenomena encountered in spherical collapse, but introduces a new effect: jet formation, the self-piercing of a bubble with a high velocity liquid jet. Examples of this phenomenon are given from light induced bubbles. Two oscillating bubbles attract or repel each other, depending on their oscillations and their distance. Upon approaching, attraction may change to repulsion and vice versa. When being close, they also shoot self-piercing jets at each other. Systems of bubbles are treated as they appear after shock wave passage through a liquid and with their branched filaments that they attain in standing sound fields. The N-bubble problem is formulated in the spirit of the n-body problem of astrophysics, but with more complicated interaction forces. Simulations are compared with three-dimensional bubble dynamics obtained by stereoscopic high speed digital videography.