R.H. Walden

Bio: R.H. Walden is an academic researcher from HRL Laboratories. The author has contributed to research in topics: Sampling (signal processing) & Software-defined radio. The author has an hindex of 1, co-authored 1 publications receiving 2052 citations.

Analog-to-digital converter survey and analysis

Abstract: Analog-to-digital converters (ADCs) are ubiquitous, critical components of software radio and other signal processing systems. This paper surveys the state-of-the-art of ADCs, including experimental converters and commercially available parts. The distribution of resolution versus sampling rate provides insight into ADC performance limitations. At sampling rates below 2 million samples per second (Gs/s), resolution appears to be limited by thermal noise. At sampling rates ranging from /spl sim/2 Ms/s to /spl sim/4 giga samples per second (Gs/s), resolution falls off by /spl sim/1 bit for every doubling of the sampling rate. This behavior may be attributed to uncertainty in the sampling instant due to aperture jitter. For ADCs operating at multi-Gs/s rates, the speed of the device technology is also a limiting factor due to comparator ambiguity. Many ADC architectures and integrated circuit technologies have been proposed and implemented to push back these limits. The trend toward single-chip ADCs brings lower power dissipation. However, technological progress as measured by the product of the ADC resolution (bits) times the sampling rate is slow. Average improvement is only /spl sim/1.5 bits for any given sampling frequency over the last six-eight years.

Microwave photonics combines two worlds

Abstract: Microwave photonics, which brings together the worlds of radiofrequency engineering and optoelectronics, has attracted great interest from both the research community and the commercial sector over the past 30 years and is set to have a bright future. The technology makes it possible to have functions in microwave systems that are complex or even not directly possible in the radiofrequency domain and also creates new opportunities for telecommunication networks. Here we introduce the technology to the photonics community and summarize recent research and important applications.

Capacity Limits of Optical Fiber Networks

Abstract: We describe a method to estimate the capacity limit of fiber-optic communication systems (or ?fiber channels?) based on information theory. This paper is divided into two parts. Part 1 reviews fundamental concepts of digital communications and information theory. We treat digitization and modulation followed by information theory for channels both without and with memory. We provide explicit relationships between the commonly used signal-to-noise ratio and the optical signal-to-noise ratio. We further evaluate the performance of modulation constellations such as quadrature-amplitude modulation, combinations of amplitude-shift keying and phase-shift keying, exotic constellations, and concentric rings for an additive white Gaussian noise channel using coherent detection. Part 2 is devoted specifically to the "fiber channel.'' We review the physical phenomena present in transmission over optical fiber networks, including sources of noise, the need for optical filtering in optically-routed networks, and, most critically, the presence of fiber Kerr nonlinearity. We describe various transmission scenarios and impairment mitigation techniques, and define a fiber channel deemed to be the most relevant for communication over optically-routed networks. We proceed to evaluate a capacity limit estimate for this fiber channel using ring constellations. Several scenarios are considered, including uniform and optimized ring constellations, different fiber dispersion maps, and varying transmission distances. We further present evidences that point to the physical origin of the fiber capacity limitations and provide a comparison of recent record experiments with our capacity limit estimation.

In-Band Full-Duplex Wireless: Challenges and Opportunities

Abstract: In-band full-duplex (IBFD) operation has emerged as an attractive solution for increasing the throughput of wireless communication systems and networks. With IBFD, a wireless terminal is allowed to transmit and receive simultaneously in the same frequency band. This tutorial paper reviews the main concepts of IBFD wireless. One of the biggest practical impediments to IBFD operation is the presence of self-interference, i.e., the interference that the modem's transmitter causes to its own receiver. This tutorial surveys a wide range of IBFD self-interference mitigation techniques. Also discussed are numerous other research challenges and opportunities in the design and analysis of IBFD wireless systems.

In-Band Full-Duplex Wireless: Challenges and Opportunities

Abstract: In-band full-duplex (IBFD) operation has emerged as an attractive solution for increasing the throughput of wireless communication systems and networks. With IBFD, a wireless terminal is allowed to transmit and receive simultaneously in the same frequency band. This tutorial paper reviews the main concepts of IBFD wireless. Because one the biggest practical impediments to IBFD operation is the presence of self-interference, i.e., the interference caused by an IBFD node's own transmissions to its desired receptions, this tutorial surveys a wide range of IBFD self-interference mitigation techniques. Also discussed are numerous other research challenges and opportunities in the design and analysis of IBFD wireless systems.

Microwave Photonics

Abstract: Broadband and low loss capability of photonics has led to an ever-increasing interest in its use for the generation, processing, control and distribution of microwave and millimeter-wave signals for applications such as broadband wireless access networks, sensor networks, radar, satellite communitarians, instrumentation and warfare systems. In this tutorial, techniques developed in the last few years in microwave photonics are reviewed with an emphasis on the systems architectures for photonic generation and processing of microwave signals, photonic true-time delay beamforming, radio-over-fiber systems, and photonic analog-to-digital conversion. Challenges in system implementation for practical applications and new areas of research in microwave photonics are also discussed.