R. Heussner

Bio: R. Heussner is an academic researcher from Intel. The author has contributed to research in topics: NMOS logic & PMOS logic. The author has an hindex of 6, co-authored 6 publications receiving 1875 citations.

A 22nm high performance and low-power CMOS technology featuring fully-depleted tri-gate transistors, self-aligned contacts and high density MIM capacitors

Abstract: A 22nm generation logic technology is described incorporating fully-depleted tri-gate transistors for the first time. These transistors feature a 3rd-generation high-k + metal-gate technology and a 5th generation of channel strain techniques resulting in the highest drive currents yet reported for NMOS and PMOS. The use of tri-gate transistors provides steep subthreshold slopes (∼70mV/dec) and very low DIBL (∼50mV/V). Self-aligned contacts are implemented to eliminate restrictive contact to gate registration requirements. Interconnects feature 9 metal layers with ultra-low-k dielectrics throughout the interconnect stack. High density MIM capacitors using a hafnium based high-k dielectric are provided. The technology is in high volume manufacturing.

A 14nm logic technology featuring 2 nd -generation FinFET, air-gapped interconnects, self-aligned double patterning and a 0.0588 µm 2 SRAM cell size

Abstract: A 14nm logic technology using 2nd-generation FinFET transistors with a novel subfin doping technique, self-aligned double patterning (SADP) for critical patterning layers, and air-gapped interconnects at performance-critical layers is described. The transistors feature rectangular fins with 8nm fin width and 42nm fin height, 4th generation high-k metal gate, and 6th-generation strained silicon, resulting in the highest drive currents yet reported for 14nm technology. This technology is in high-volume manufacturing.

A 65nm logic technology featuring 35nm gate lengths, enhanced channel strain, 8 Cu interconnect layers, low-k ILD and 0.57 /spl mu/m/sup 2/ SRAM cell

Abstract: A 65nm generation logic technology with 1.2nm physical gate oxide, 35nm gate length, enhanced channel strain, NiSi, 8 layers of Cu interconnect, and low-k ILD for dense high performance logic is presented. Transistor gate length is scaled down to 35nm while not scaling the gate oxide as a means to improve performance and reduce power. Increased NMOS and PMOS drive currents are achieved by enhanced channel strain and junction engineering. 193nm lithography along with APSM mask technology is used on critical layers to provide aggressive design rules and a 6-T SRAM cell size of 0.57/spl mu/m/sup 2/. Process yield, performance and reliability are demonstrated on a 70 Mbit SRAM test vehicle with >0.5 billion transistors.

A 32nm logic technology featuring 2 nd -generation high-k + metal-gate transistors, enhanced channel strain and 0.171μm 2 SRAM cell size in a 291Mb array

Abstract: A 32 nm generation logic technology is described incorporating 2nd-generation high-k + metal-gate technology, 193 nm immersion lithography for critical patterning layers, and enhanced channel strain techniques. The transistors feature 9 Aring EOT high-k gate dielectric, dual band-edge workfunction metal gates, and 4th-generation strained silicon, resulting in the highest drive currents yet reported for NMOS and PMOS. Process yield, performance and reliability are demonstrated on a 291 Mbit SRAM test vehicle, with 0.171 mum2 cell size, containing >1.9 billion transistors.

High performance 32nm logic technology featuring 2 nd generation high-k + metal gate transistors

Abstract: A 32nm logic technology for high performance microprocessors is described. 2nd generation high-k + metal gate transistors provide record drive currents at the tightest gate pitch reported for any 32nm or 28nm logic technology. NMOS drive currents are 1.62mA/um Idsat and 0.231mA/um Idlin at 1.0V and 100nA/um I off . PMOS drive currents are 1.37mA/um Idsat and 0.240mA/um Idlin at 1.0V and 100nA/um I off . The impact of SRAM cell and array size on Vccmin is reported.

Semiconductor device, and manufacturing method thereof

Abstract: An object is to provide a semiconductor device of which a manufacturing process is not complicated and by which cost can be suppressed, by forming a thin film transistor using an oxide semiconductor film typified by zinc oxide, and a manufacturing method thereof. For the semiconductor device, a gate electrode is formed over a substrate; a gate insulating film is formed covering the gate electrode; an oxide semiconductor film is formed over the gate insulating film; and a first conductive film and a second conductive film are formed over the oxide semiconductor film. The oxide semiconductor film has at least a crystallized region in a channel region.

A 45nm Logic Technology with High-k+Metal Gate Transistors, Strained Silicon, 9 Cu Interconnect Layers, 193nm Dry Patterning, and 100% Pb-free Packaging

Abstract: A 45 nm logic technology is described that for the first time incorporates high-k + metal gate transistors in a high volume manufacturing process. The transistors feature 1.0 nm EOT high-k gate dielectric, dual band edge workfunction metal gates and third generation strained silicon, resulting in the highest drive currents yet reported for NMOS and PMOS. The technology also features trench contact based local routing, 9 layers of copper interconnect with low-k ILD, low cost 193 nm dry patterning, and 100% Pb-free packaging. Process yield, performance and reliability are demonstrated on 153 Mb SRAM arrays with SRAM cell size of 0.346 mum2, and on multiple microprocessors.

Graphene and two-dimensional materials for silicon technology.

Abstract: The development of silicon semiconductor technology has produced breakthroughs in electronics—from the microprocessor in the late 1960s to early 1970s, to automation, computers and smartphones—by downscaling the physical size of devices and wires to the nanometre regime. Now, graphene and related two-dimensional (2D) materials offer prospects of unprecedented advances in device performance at the atomic limit, and a synergistic combination of 2D materials with silicon chips promises a heterogeneous platform to deliver massively enhanced potential based on silicon technology. Integration is achieved via three-dimensional monolithic construction of multifunctional high-rise 2D silicon chips, enabling enhanced performance by exploiting the vertical direction and the functional diversification of the silicon platform for applications in opto-electronics and sensing. Here we review the opportunities, progress and challenges of integrating atomically thin materials with silicon-based nanosystems, and also consider the prospects for computational and non-computational applications. Progress in integrating atomically thin two-dimensional materials with silicon-based technology is reviewed, together with the associated opportunities and challenges, and a roadmap for future applications is presented.

An 80-Tile 1.28TFLOPS Network-on-Chip in 65nm CMOS

Abstract: A 275mm2 network-on-chip architecture contains 80 tiles arranged as a 10 times 8 2D array of floating-point cores and packet-switched routers, operating at 4GHz. The 15-F04 design employs mesochronous clocking, fine-grained clock gating, dynamic sleep transistors, and body-bias techniques. The 65nm 100M transistor die is designed to achieve a peak performance of 1.0TFLOPS at 1V while dissipating 98W.

A 5-GHz Mesh Interconnect for a Teraflops Processor

Abstract: A multicore processor in 65-Nm technology with 80 single-precision, floatingpoint cores delivers performance in excess of a Teraflops while consuming less than 100 W. A 2D on-die mesh interconnection network operating at 5 GHz provides the high-performance communication fabric to connect the cores. The network delivers a bisection bandwidth of 2.56 Terabits per second and a per hop fall-through latency of 1 nanosecond.