Author
R. K. Dayal
Other affiliations: Indira Gandhi Centre for Atomic Research
Bio: R. K. Dayal is an academic researcher from VIT University. The author has contributed to research in topics: Corrosion & Austenitic stainless steel. The author has an hindex of 27, co-authored 113 publications receiving 2147 citations. Previous affiliations of R. K. Dayal include Indira Gandhi Centre for Atomic Research.
Papers published on a yearly basis
Papers
More filters
TL;DR: Pitting corrosion studies were carried out on cold worked (5, 10, 15, 20, 30, and 40%) nitrogen-bearing (0.05, 0.1% and 0.22% N) type 316L stainless steels in neutral chloride medium as mentioned in this paper.
166 citations
TL;DR: In this article, the pitting corrosion and sensitization in laser rapid manufactured specimens of type 316L stainless steel are studied and compared with its wrought and weld deposit (by plasma transferred arc welding-PTAW) counterparts.
90 citations
TL;DR: In this paper, the effects of hydrogen on the passivity and pitting susceptibility of type 316L stainless steels have been investigated with alloys containing different nitrogen contents (0.015, 0.198 and 0.556) without affecting breakdown potential.
83 citations
TL;DR: AISI type 316L stainless steel was subjected to electrochemical polarization tests in an aqueous environment of varying chloride ion concentration (17,500 −70,000 −ppm), pH (1.23 −5.0) and temperature (298 −333 K).
78 citations
TL;DR: A review of important contributions to this topic with special emphasis on the influence of metallurgical variables is presented in this paper, where the present state of understanding is discussed in the following areas: mechanisms, test methods, sensitisation diagrams, influence of chemical composition, cold work and grain size, low temperature sensitisation, modelling and laser surface treatment.
Abstract: Austenitic stainless steels are the most favoured construction materials for various components required in chemical, petrochemical, fertiliser and nuclear industries. However, these steels are prone to sensitisation. In the sensitised condition, the steels are quite susceptible to intergranular corrosion and intergranular stress corrosion cracking in chloride and caustic environments resulting in the premature failure of the fabricated components during precommissioning and service periods. The topic of sensitisation has been of interest in studies worldwide. The studies included mechanism of sensitisation, test methods, data generation, and influence of several variables and protection methods. This article covers a review of important contributions to this topic with special emphasis on the influence of metallurgical variables. The present state of understanding is discussed in the following areas: mechanisms, test methods, sensitisation diagrams, influence of chemical composition, cold work and grain size, low temperature sensitisation, modelling and laser surface treatment. The need for further investigation in certain areas is highlighted.
78 citations
Cited by
More filters
[...]
TL;DR: There is, I think, something ethereal about i —the square root of minus one, which seems an odd beast at that time—an intruder hovering on the edge of reality.
Abstract: There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality.
Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …
33,785 citations
TL;DR: Additive manufacturing implies layer by layer shaping and consolidation of powder feedstock to arbitrary configurations, normally using a computer controlled laser as discussed by the authors, which is based on a novel materials incremental manufacturing philosophy.
Abstract: Unlike conventional materials removal methods, additive manufacturing (AM) is based on a novel materials incremental manufacturing philosophy. Additive manufacturing implies layer by layer shaping and consolidation of powder feedstock to arbitrary configurations, normally using a computer controlled laser. The current development focus of AM is to produce complex shaped functional metallic components, including metals, alloys and metal matrix composites (MMCs), to meet demanding requirements from aerospace, defence, automotive and biomedical industries. Laser sintering (LS), laser melting (LM) and laser metal deposition (LMD) are presently regarded as the three most versatile AM processes. Laser based AM processes generally have a complex non-equilibrium physical and chemical metallurgical nature, which is material and process dependent. The influence of material characteristics and processing conditions on metallurgical mechanisms and resultant microstructural and mechanical properties of AM proc...
2,402 citations
Abstract: This article presents an overview of the developments in stainless steels made since the 1990s. Some of the new applications that involve the use of stainless steel are also introduced. A brief introduction to the various classes of stainless steels, their precipitate phases and the status quo of their production around the globe is given first. The advances in a variety of subject areas that have been made recently will then be presented. These recent advances include (1) new findings on the various precipitate phases (the new J phase, new orientation relationships, new phase diagram for the Fe–Cr system, etc.); (2) new suggestions for the prevention/mitigation of the different problems and new methods for their detection/measurement and (3) new techniques for surface/bulk property enhancement (such as laser shot peening, grain boundary engineering and grain refinement). Recent developments in topics like phase prediction, stacking fault energy, superplasticity, metadynamic recrystallisation and the calculation of mechanical properties are introduced, too. In the end of this article, several new applications that involve the use of stainless steels are presented. Some of these are the use of austenitic stainless steels for signature authentication (magnetic recording), the utilisation of the cryogenic magnetic transition of the sigma phase for hot spot detection (the Sigmaplugs), the new Pt-enhanced radiopaque stainless steel (PERSS) coronary stents and stainless steel stents that may be used for magnetic drug targeting. Besides recent developments in conventional stainless steels, those in the high-nitrogen, low-Ni (or Ni-free) varieties are also introduced. These recent developments include new methods for attaining very high nitrogen contents, new guidelines for alloy design, the merits/demerits associated with high nitrogen contents, etc.
1,668 citations
Book•
12 Mar 2014
TL;DR: In this paper, the effect of reflectivity of the surface, when a pure, monochromatic laser (6) is used, is remedied by the simultaneous application of a relatively shorter wavelength beam (1).
Abstract: In the laser treatment of a workpiece (9), e.g. for surface hardening, melting, alloying, cladding, welding or cutting, the adverse effect of reflectivity of the surface, when a pure, monochromatic laser (6) is used, is remedied by the simultaneous application of a relatively shorter wavelength beam (1). The two beams (1)(5) may be combined by a beam coupler (4) or may reach the workpiece (9) by separate optical paths (not shown). The shorter wavelength beam (1) improves the coupling efficiency of the higher- powered laser beam (5).
1,539 citations
[...]
TL;DR: In this paper, the structure and properties of bearing steels prior to the point of service are first assessed and described in the context of steelmaking, manufacturing and engineering requirements, followed by a thorough critique of the damage mechanisms that operate during service and in accelerated tests.
729 citations