R.M. De La Rue

Bio: R.M. De La Rue is an academic researcher from University of Glasgow. The author has contributed to research in topics: Photonic crystal & Photonics. The author has an hindex of 47, co-authored 323 publications receiving 7322 citations. Previous affiliations of R.M. De La Rue include University of Bath & University of Malaya.

A compact two-dimensional grating coupler used as a polarization splitter

Abstract: We demonstrate a novel polarization splitter based on a two-dimensional grating etched in a silicon-on-insulator waveguide. The device couples orthogonal modes from a single-mode optical fiber into identical modes of two planar ridge waveguides. The extinction ratio is better than 18 dB in the wavelength range of 1530-1560 nm and the coupling efficiency is approximately 20%. The device is very compact and couples light only to transverse-electric modes of the planar waveguides. Therefore, it may be used in a polarization diversity configuration to implement a polarization insensitive photonic integrated circuit based on photonic crystal waveguides.

Optical and confinement properties of two-dimensional photonic crystals

Abstract: We describe experiments on a quasi-two dimensional (2-D) optical system consisting of a triangular array of air cylinders etched through a laser-like Ga(Al)As waveguiding heterostructure. Such a configuration is shown to yield results very well approximated by the infinite 2-D photonic crystal (PC). We first present a set of measurements of the optical properties (transmission, reflection, and diffraction) of slabs of these photonic crystals, including the case of in-plane Fabry-Perot cavities formed between two such crystals. The measurement method makes use of the guided photoluminescence of embedded quantum wells or InAs quantum dots to generate an internal probe beam. Out-of-plant, scattering losses are evaluated by various means. In a second part, in-plane micrometer-sized photonic boxes bounded by circular trenches or by two-dimensional photonic crystal are probed by exciting spontaneous emission inside them. The high quality factors observed in such photon boxes demonstrate the excellent photon confinement attainable in these systems and allow to access the detail of the modal structure. Last, some perspectives for applications are offered.

Fabrication of low-loss photonic wires in silicon-on-insulator using hydrogen silsesquioxane electron-beam resist

Abstract: Fully etched photonic wires in silicon-on-insulator have been fabricated and propagation loss values as low as 0.92 plusmn 0.14 dB/cm have been obtained. Hydrogen silsesquioxane (HSQ) was used as an electron beam resist and as a direct mask in the dry-etch processing of the silicon core layer. The dimensional repeatability of the fabrication process was also estimated through measurements of the wavelength selection performance of nominally identical photonic wire Bragg gratings fabricated at intervals over a period of 37 days.

Quantitative Measurement of Transmission, Reflection, and Diffraction of Two-Dimensional Photonic Band Gap Structures at Near-Infrared Wavelengths

Abstract: We present quantitative measurements of the interaction between a guided optical wave and a two-dimensional photonic crystal using spontaneous emission of the material as an internal point source. This is the first analysis at near-infrared wavelengths where transmission, reflection, and inplane diffraction are quantified at the same time. Low transmission coincides with high reflection or in-plane diffraction, indicating that the light remains guided upon interaction. Also, good qualitative agreement is found with a two-dimensional simulation based on the transfer matrix method. [S0031-9007(97)04591-2]

Tunable Delay Lines in Silicon Photonics: Coupled Resonators and Photonic Crystals, a Comparison

Abstract: In this paper, we report a direct comparison between coupled resonator optical waveguides (CROWs) and photonic crystal waveguides (PhCWs), which have both been exploited as tunable delay lines. The two structures were fabricated on the same silicon-on-insulator (SOI) technological platform, with the same fabrication facilities and evaluated under the same signal bit-rate conditions. We compare the frequency- and time-domain response of the two structures; the physical mechanism underlying the tuning of the delay; the main limits induced by loss, dispersion, and structural disorder; and the impact of CROW and PhCW tunable delay lines on the transmission of data stream intensity and phase modulated up to 100 Gb/s. The main result of this study is that, in the considered domain of applications, CROWs and PhCWs behave much more similarly than one would expect. At data rates around 100 Gb/s, CROWs and PhCWs can be placed in competition. Lower data rates, where longer absolute delays are required and propagation loss becomes a critical issue, are the preferred domain of CROWs fabricated with large ring resonators, while at data rates in the terabit range, PhCWs remain the leading technology.

Photonic crystals

Abstract: The term photonic crystals appears because of the analogy between electron waves in crystals and the light waves in artificial periodic dielectric structures. During the recent years the investigation of one-, two-and three-dimensional periodic structures has attracted a widespread attention of the world optics community because of great potentiality of such structures in advanced applied optical fields. The interest in periodic structures has been stimulated by the fast development of semiconductor technology that now allows the fabrication of artificial structures, whose period is comparable with the wavelength of light in the visible and infrared ranges.

Optical multi-mode interference devices based on self-imaging: principles and applications

Abstract: This paper presents an overview of integrated optics routing and coupling devices based on multimode interference. The underlying self-imaging principle in multimode waveguides is described using a guided mode propagation analysis. Special issues concerning the design and operation of multimode interference devices are discussed, followed by a survey of reported applications. It is shown that multimode interference couplers offer superior performance, excellent tolerance to polarization and wavelength variations, and relaxed fabrication requirements when compared to alternatives such as directional couplers, adiabatic X- or Y-junctions, and diffractive star couplers. >

Silicon microring resonators

Abstract: An overview is presented of the current state-of-the-art in silicon nanophotonic ring resonators. Basic theory of ring resonators is discussed, and applied to the peculiarities of submicron silicon photonic wire waveguides: the small dimensions and tight bend radii, sensitivity to perturbations and the boundary conditions of the fabrication processes. Theory is compared to quantitative measurements. Finally, several of the more promising applications of silicon ring resonators are discussed: filters and optical delay lines, label-free biosensors, and active rings for efficient modulators and even light sources.

Two-photon polymerization initiators for three-dimensional optical data storage and microfabrication

Abstract: Two-photon excitation provides a means of activating chemical or physical processes with high spatial resolution in three dimensions and has made possible the development of three-dimensional fluorescence imaging, optical data storage, and lithographic microfabrication. These applications take advantage of the fact that the two-photon absorption probability depends quadratically on intensity, so under tight-focusing conditions, the absorption is confined at the focus to a volume of order λ3 (where λ is the laser wavelength). Any subsequent process, such as fluorescence or a photoinduced chemical reaction, is also localized in this small volume. Although three-dimensional data storage and microfabrication have been illustrated using two-photon-initiated polymerization of resins incorporating conventional ultraviolet-absorbing initiators, such photopolymer systems exhibit low photosensitivity as the initiators have small two-photon absorption cross-sections (δ). Consequently, this approach requires high laser power, and its widespread use remains impractical. Here we report on a class of π;-conjugated compounds that exhibit large δ (as high as 1, 250 × 10−50 cm4 s per photon) and enhanced two-photon sensitivity relative to ultraviolet initiators. Two-photon excitable resins based on these new initiators have been developed and used to demonstrate a scheme for three-dimensional data storage which permits fluorescent and refractive read-out, and the fabrication of three-dimensional micro-optical and micromechanical structures, including photonic-bandgap-type structures.