R.M. Sillero

Bio: R.M. Sillero is an academic researcher from University of Seville. The author has contributed to research in topics: Metamaterial & Equivalent circuit. The author has an hindex of 1, co-authored 1 publications receiving 1265 citations.

Equivalent-circuit models for split-ring resonators and complementary split-ring resonators coupled to planar transmission lines

Abstract: In this paper, a new approach for the development of planar metamaterial structures is developed. For this purpose, split-ring resonators (SRRs) and complementary split-ring resonators (CSRRs) coupled to planar transmission lines are investigated. The electromagnetic behavior of these elements, as well as their coupling to the host transmission line, are studied, and analytical equivalent-circuit models are proposed for the isolated and coupled SRRs/CSRRs. From these models, the stopband/passband characteristics of the analyzed SRR/CSRR loaded transmission lines are derived. It is shown that, in the long wavelength limit, these stopbands/passbands can be interpreted as due to the presence of negative/positive values for the effective /spl epsiv/ and /spl mu/ of the line. The proposed analysis is of interest in the design of compact microwave devices based on the metamaterial concept.

Memory Metamaterials

Abstract: The resonant elements that grant metamaterials their unique properties have the fundamental limitation of restricting their useable frequency bandwidth The development of frequency-agile metamaterials has helped to alleviate these bandwidth restrictions by allowing real-time tuning of the metamaterial frequency response We demonstrate electrically-controlled persistent frequency tuning of a metamaterial, allowing lasting modification of its response using a transient stimulus This work demonstrates a form of memory capacitance which interfaces metamaterials with a class of devices known collectively as memory devices

High-Sensitivity Metamaterial-Inspired Sensor for Microfluidic Dielectric Characterization

Abstract: A new metamaterial-inspired microwave microfluidic sensor is proposed in this paper. The main part of the device is a microstrip coupled complementary split-ring resonator (CSRR). At resonance, a strong electric field will be established along the sides of CSRR producing a very sensitive area to a change in the nearby dielectric material. A micro-channel is positioned over this area for microfluidic sensing. The liquid sample flowing inside the channel modifies the resonance frequency and peak attenuation of the CSRR resonance. The dielectric properties of the liquid sample can be estimated by establishing an empirical relation between the resonance characteristics and the sample complex permittivity. The designed microfluidic sensor requires a very small amount of sample for testing since the cross-sectional area of the sensing channel is over five orders of magnitude smaller than the square of the wavelength. The proposed microfluidic sensing concept is compatible with lab-on-a-chip platforms owing to its compactness.

Thin-film sensing with planar terahertz metamaterials: sensitivity and limitations.

Abstract: The limiting effects of varying the thickness of a dielectric overlayer on planar double split-ring resonator (SRR) arrays are studied by terahertz time-domain spectroscopy. Uniform dielectric overlayers from 100 nm to 16 µm thick are deposited onto fixed SRR arrays in order to shift the resonance frequency of the electric response. We discuss the bounds of resonance shifting and emphasize the resulting limitations for SRR-based sensing. These results are presented in the context of typical biosensing situations and are compared to previous work and other existing sensing platforms.

Metamaterial Apertures for Computational Imaging

Abstract: By leveraging metamaterials and compressive imaging, a low-profile aperture capable of microwave imaging without lenses, moving parts, or phase shifters is demonstrated. This designer aperture allows image compression to be performed on the physical hardware layer rather than in the postprocessing stage, thus averting the detector, storage, and transmission costs associated with full diffraction-limited sampling of a scene. A guided-wave metamaterial aperture is used to perform compressive image reconstruction at 10 frames per second of two-dimensional (range and angle) sparse still and video scenes at K-band (18 to 26 gigahertz) frequencies, using frequency diversity to avoid mechanical scanning. Image acquisition is accomplished with a 40:1 compression ratio.

Design of Spiral and Multiple Split-Ring Resonators for the Realization of Miniaturized Metamaterial Samples

Abstract: We present the design of miniaturized resonant inclusions to be employed in the practical realization of metamaterial samples with anomalous values of the real part of the permeability. Such inclusions, in fact, can be employed in the design of both mu-negative (MNG) materials and artificial magnetodielectrics (with negative and high-positive values of the real part of the permeability, respectively). The inclusions here considered are the multiple split-ring resonators (MSRRs), that represent a straightforward extension of the commonly used split-ring resonators (SRRs), and the spiral resonators (SRs), that enable a greater miniaturization rate. Some physical insights on the resonance mechanism and on the inherent saturation of the resonant frequency when increasing the number of the rings of the MSRRs and the number of the turns of the SRs are given in the paper. New and accurate analytical design formulas, based on a quasi-static model, for both MSRRs and SRs are derived and tested through a proper comparison with the existing formulas and full-wave numerical results. Both MSRRs and SRs are shown to be useful to reduce the electrical dimensions of the resonant inclusions when synthesizing artificial metamaterials.