scispace - formally typeset
Search or ask a question
Author

R.P.S. Chakradhar

Bio: R.P.S. Chakradhar is an academic researcher from National Aerospace Laboratories. The author has contributed to research in topics: Electron paramagnetic resonance & Photoluminescence. The author has an hindex of 36, co-authored 166 publications receiving 4423 citations. Previous affiliations of R.P.S. Chakradhar include Council of Scientific and Industrial Research & Indian Institute of Science.


Papers
More filters
Journal ArticleDOI
TL;DR: In this paper, powder X-ray diffraction (PXRD) analysis, scanning electron microscopy (SEM), Transmission electron microscope (TEM), Fourier transformed infrared (FTIR) spectroscopy, photoluminescence (PL) and Electron Paramagnetic Resonance (EPR) measurements were used for characterization.

262 citations

Journal ArticleDOI
TL;DR: In this article, the anti-icing properties of hydrophilic, hydrophobic and super-hydrophobic surfaces/coatings were evaluated using a custom-built apparatus based on zero-degree cone test method.

229 citations

Journal ArticleDOI
TL;DR: Spherical shaped ZnO nanopowders (14-50 nm) were synthesized by a low temperature solution combustion method in a short time <5 min and SEM micrographs reveal that the particles are spherical in shape and the powders contained several voids and pores.

137 citations

Journal ArticleDOI
TL;DR: In this article, the effect of calcination temperature on the structural, photoluminescence (PL), and thermoluminecence (TL) properties of nanophosphors has been investigated.
Abstract: Red light emitting cubic Y1.95Eu0.05O3 nanophosphors have been synthesized by a low temperature solution combustion method using ethylene diamine tetra acetic acid (EDTA) as fuel. The systematic studies on the effect of calcination temperature on its structural, photoluminescence (PL), and thermoluminescence (TL) properties were reported. The crystallinity of the samples increases, and the strain is reduced with increasing calcination temperature. SEM micrographs reveal that samples lose their porous nature with an increase in calcination temperature. PL spectra show that the intensity of the red emission (611 nm) is highly dependent on the calcination temperature and is found to be 10 times higher when compared to as-formed samples. The optical band gap (E-g) was found to reduce with an increase of calcination temperature due to reduction of surface defects. The thermoluminescence (TL) intensity was found to be much enhanced in the 1000 degrees C calcined sample. The increase of PL and TL intensity with calcination temperature is attributed to the decrease of the nonradiative recombination probability, which occurs through the elimination of quenching defects. The trap parameters (E, b, s) were estimated from Chen's glow peak shape method and are discussed in detail for their possible usage in dosimetry.

136 citations

Journal ArticleDOI
TL;DR: In this paper, Li+-doped Gd2O3:Eu3+ nanophosphor was synthesized by low-temperature solution combustion technique in a short time.

135 citations


Cited by
More filters
Journal ArticleDOI
TL;DR: The trivalent europium ion (Eu3+) is well known for its strong luminescence in the red spectral region, but this ion is also interesting from a theoretical point of view as mentioned in this paper.

1,906 citations

Journal ArticleDOI
Shi Ye1, F. Xiao1, Y.X. Pan1, Y. Y. Ma1, Qi Zhang1 
TL;DR: In this article, the most recent advances in the synthesis and application of phosphors for white light-emitting diodes (pc-WLEDs) with emphasis specifically on: (a) principles to tune the excitation and emission spectra of the phosphors: prediction according to crystal field theory, and structural chemistry characteristics (e.g. covalence of chemical bonds, electronegativity, and polarization effects of element); (b) pc-W LEDs with phosphors excited by blue-LED chips: phosphor characteristics, structure, and activated ions
Abstract: Phosphor-converted white light-emitting diodes (pc-WLEDs) are emerging as an indispensable solid-state light source for the next generation lighting industry and display systems due to their unique properties including but not limited to energy savings, environment-friendliness, small volume, and long persistence. Until now, major challenges in pc-WLEDs have been to achieve high luminous efficacy, high chromatic stability, brilliant color-rending properties, and price competitiveness against fluorescent lamps, which rely critically on the phosphor properties. A comprehensive understanding of the nature and limitations of phosphors and the factors dominating the general trends in pc-WLEDs is of fundamental importance for advancing technological applications. This report aims to provide the most recent advances in the synthesis and application of phosphors for pc-WLEDs with emphasis specifically on: (a) principles to tune the excitation and emission spectra of phosphors: prediction according to crystal field theory, and structural chemistry characteristics (e.g. covalence of chemical bonds, electronegativity, and polarization effects of element); (b) pc-WLEDs with phosphors excited by blue-LED chips: phosphor characteristics, structure, and activated ions (i.e. Ce 3+ and Eu 2+ ), including YAG:Ce, other garnets, non-garnets, sulfides, and (oxy)nitrides; (c) pc-WLEDs with phosphors excited by near ultraviolet LED chips: single-phased white-emitting phosphors (e.g. Eu 2+ –Mn 2+ activated phosphors), red-green-blue phosphors, energy transfer, and mechanisms involved; and (d) new clues for designing novel high-performance phosphors for pc-WLEDs based on available LED chips. Emphasis shall also be placed on the relationships among crystal structure, luminescence properties, and device performances. In addition, applications, challenges and future advances of pc-WLEDs will be discussed.

1,860 citations

Journal ArticleDOI
TL;DR: The physicochemical characteristics of spinels such as their compositions, structures, morphologies, defects, and substrates have been rationally regulated through various approaches and can yield spinels with improved ORR/OER catalytic activities, which can further accelerate the speed, prolong the life, and narrow the polarization of fuel cells, metal-air batteries, and water splitting devices.
Abstract: Spinels with the formula of AB2O4 (where A and B are metal ions) and the properties of magnetism, optics, electricity, and catalysis have taken significant roles in applications of data storage, biotechnology, electronics, laser, sensor, conversion reaction, and energy storage/conversion, which largely depend on their precise structures and compositions. In this review, various spinels with controlled preparations and their applications in oxygen reduction/evolution reaction (ORR/OER) and beyond are summarized. First, the composition and structure of spinels are introduced. Then, recent advances in the preparation of spinels with solid-, solution-, and vapor-phase methods are summarized, and new methods are particularly highlighted. The physicochemical characteristics of spinels such as their compositions, structures, morphologies, defects, and substrates have been rationally regulated through various approaches. This regulation can yield spinels with improved ORR/OER catalytic activities, which can furth...

1,036 citations

Journal ArticleDOI
TL;DR: This Review focuses on the analysis of new approaches and results in the field of solution combustion synthesis (SCS) obtained during recent years, emphasizing the chemical mechanisms that are responsible for rapid self-sustained combustion reactions.
Abstract: Solution combustion is an exciting phenomenon, which involves propagation of self-sustained exothermic reactions along an aqueous or sol–gel media. This process allows for the synthesis of a variety of nanoscale materials, including oxides, metals, alloys, and sulfides. This Review focuses on the analysis of new approaches and results in the field of solution combustion synthesis (SCS) obtained during recent years. Thermodynamics and kinetics of reactive solutions used in different chemical routes are considered, and the role of process parameters is discussed, emphasizing the chemical mechanisms that are responsible for rapid self-sustained combustion reactions. The basic principles for controlling the composition, structure, and nanostructure of SCS products, and routes to regulate the size and morphology of the nanoscale materials are also reviewed. Recently developed systems that lead to the formation of novel materials and unique structures (e.g., thin films and two-dimensional crystals) with unusual...

841 citations

Journal ArticleDOI
TL;DR: A review of publications on nanomaterials in the biennium 2008-2010 includes the most recent publications in risk assessment/toxicity, characterization and stability, toxicity, fate and transport of NMs in terrestrial ecosystems, and new ENMs.

522 citations