scispace - formally typeset
Search or ask a question
Author

R. S. Bogart

Bio: R. S. Bogart is an academic researcher from Stanford University. The author has contributed to research in topics: Helioseismology & Convection zone. The author has an hindex of 21, co-authored 73 publications receiving 10498 citations.


Papers
More filters
Journal ArticleDOI
TL;DR: In this paper, the authors describe the implementation and main properties of a new inversion code for the polarized radiative transfer equation (VFISV: Very Fast Inversion of the Stokes Vector).
Abstract: In this paper we describe in detail the implementation and main properties of a new inversion code for the polarized radiative transfer equation (VFISV: Very Fast Inversion of the Stokes Vector). VFISV will routinely analyze pipeline data from the Helioseismic and Magnetic Imager (HMI) on-board of the Solar Dynamics Observatory (SDO). It will provide full-disk maps (4096×4096 pixels) of the magnetic field vector on the Solar Photosphere every ten minutes. For this reason VFISV is optimized to achieve an inversion speed that will allow it to invert sixteen million pixels every ten minutes with a modest number (approx. 50) of CPUs. Here we focus on describing a number of important details, simplifications and tweaks that have allowed us to significantly speed up the inversion process. We also give details on tests performed with data from the spectropolarimeter on-board of the Hinode spacecraft.

358 citations

Journal ArticleDOI
06 Nov 1997-Nature
TL;DR: In this paper, the authors used helioseismic tomography to detect the longitude-averaged subsurface flow in the outer 4% of the Sun and found that the surface flow penetrates deeply, so that it is likely to be an important factor in solar dynamics.
Abstract: Gas on the Sun's surface has been observed1,2,3,4 to flow away from the equator towards both poles. If the same flow persists to great depths, it could play an important dynamical role in the eleven-year sunspot cycle, by carrying the magnetic remnants of the sunspots to high latitudes5. An even deeper counterflow, which would be required to maintain mass balance, could explain why new sunspots form at lower latitudes as the cycle progresses6. These deep flows would also redistribute angular momentum within the Sun, and therefore help to maintain the faster rotation of the equator relative to the poles7. Here we report the detection, using helioseismic tomography, of the longitude-averaged subsurface flow in the outer 4% of the Sun. We find that the subsurface flow is approximately constant in this depth range, and that the speed is similar to that seen on the surface. This demonstrates that the surface flow penetrates deeply, so that it is likely to be an important factor in solar dynamics.

288 citations

Book ChapterDOI
TL;DR: In this article, the Michelson Doppler Imager instrument on board SOHO provides continuous observations of oscillation modes of angular degree, l, from 0 to ∼ 300.
Abstract: The medium-l program of the Michelson Doppler Imager instrument on board SOHO provides continuous observations of oscillation modes of angular degree, l, from 0 to ∼ 300. The data for the program are partly processed on board because only about 3% of MDI observations can be transmitted continuously to the ground. The on-board data processing, the main component of which is Gaussian-weighted binning, has been optimized to reduce the negative influence of spatial aliasing of the high-degree oscillation modes. The data processing is completed in a data analysis pipeline at the SOI Stanford Support Center to determine the mean multiplet frequencies and splitting coefficients.

236 citations

Journal ArticleDOI
TL;DR: In this paper, two processing pipelines have been implemented at NASA's Solar Dynamics Observatory (SDO) Joint Science Operations Center (JSOC) at Stanford University to compute these observables from calibrated Level-1 filtergrams, one that computes line-of-sight quantities every 45 seconds and the other, primarily for the vector magnetic field, that compute averages on a 720-second cadence.
Abstract: NASA’s Solar Dynamics Observatory (SDO) spacecraft was launched 11 February 2010 with three instruments onboard, including the Helioseismic and Magnetic Imager (HMI). After commissioning, HMI began normal operations on 1 May 2010 and has subsequently observed the Sun’s entire visible disk almost continuously. HMI collects sequences of polarized filtergrams taken at a fixed cadence with two $4096 \times 4096$ cameras, from which are computed arcsecond-resolution maps of photospheric observables that include line-of-sight velocity and magnetic field, continuum intensity, line width, line depth, and the Stokes polarization parameters [ $I, Q, U, V$ ]. Two processing pipelines have been implemented at the SDO Joint Science Operations Center (JSOC) at Stanford University to compute these observables from calibrated Level-1 filtergrams, one that computes line-of-sight quantities every 45 seconds and the other, primarily for the vector magnetic field, that computes averages on a 720-second cadence. Corrections are made for static and temporally changing CCD characteristics, bad pixels, image alignment and distortion, polarization irregularities, filter-element uncertainty and nonuniformity, as well as Sun–spacecraft velocity. We detail the functioning of these two pipelines, explain known issues affecting the measurements of the resulting physical quantities, and describe how regular updates to the instrument calibration impact them. We also describe how the scheme for computing the observables is optimized for actual HMI observations. Initial calibration of HMI was performed on the ground using a variety of light sources and calibration sequences. During the five years of the SDO prime mission, regular calibration sequences have been taken on orbit to improve and regularly update the instrument calibration, and to monitor changes in the HMI instrument. This has resulted in several changes in the observables processing that are detailed here. The instrument more than satisfies all of the original specifications for data quality and continuity. The procedures described here still have significant room for improvement. The most significant remaining systematic errors are associated with the spacecraft orbital velocity.

153 citations

Book ChapterDOI
TL;DR: In this paper, the authors measured a large number of times between different locations and using an inversion method, it was possible to construct 3-dimensional maps of the subsurface inhomogeneities.
Abstract: In time-distance helioseismology, the travel time of acoustic waves is measured between various points on the solar surface. To some approximation, the waves can be considered to follow ray paths that depend only on a mean solar model, with the curvature of the ray paths being caused by the increasing sound speed with depth below the surface. The travel time is affected by various inhomogeneities along the ray path, including flows, temperature inhomogeneities, and magnetic fields. By measuring a large number of times between different locations and using an inversion method, it is possible to construct 3-dimensional maps of the subsurface inhomogeneities.

151 citations


Cited by
More filters
Journal ArticleDOI
TL;DR: The Solar Dynamics Observatory (SDO) was launched on 11 February 2010 at 15:23 UT from Kennedy Space Center aboard an Atlas V 401 (AV-021) launch vehicle as mentioned in this paper.
Abstract: The Solar Dynamics Observatory (SDO) was launched on 11 February 2010 at 15:23 UT from Kennedy Space Center aboard an Atlas V 401 (AV-021) launch vehicle. A series of apogee-motor firings lifted SDO from an initial geosynchronous transfer orbit into a circular geosynchronous orbit inclined by 28° about the longitude of the SDO-dedicated ground station in New Mexico. SDO began returning science data on 1 May 2010. SDO is the first space-weather mission in NASA’s Living With a Star (LWS) Program. SDO’s main goal is to understand, driving toward a predictive capability, those solar variations that influence life on Earth and humanity’s technological systems. The SDO science investigations will determine how the Sun’s magnetic field is generated and structured, how this stored magnetic energy is released into the heliosphere and geospace as the solar wind, energetic particles, and variations in the solar irradiance. Insights gained from SDO investigations will also lead to an increased understanding of the role that solar variability plays in changes in Earth’s atmospheric chemistry and climate. The SDO mission includes three scientific investigations (the Atmospheric Imaging Assembly (AIA), Extreme Ultraviolet Variability Experiment (EVE), and Helioseismic and Magnetic Imager (HMI)), a spacecraft bus, and a dedicated ground station to handle the telemetry. The Goddard Space Flight Center built and will operate the spacecraft during its planned five-year mission life; this includes: commanding the spacecraft, receiving the science data, and forwarding that data to the science teams. The science investigations teams at Stanford University, Lockheed Martin Solar Astrophysics Laboratory (LMSAL), and University of Colorado Laboratory for Atmospheric and Space Physics (LASP) will process, analyze, distribute, and archive the science data. We will describe the building of SDO and the science that it will provide to NASA.

3,043 citations

Journal ArticleDOI
TL;DR: Modules for Experiments in Stellar Astrophysics (MESA) as discussed by the authors is an open source software package for modeling the evolution of stellar structures and composition. But it is not suitable for large-scale systems such as supernovae.
Abstract: We substantially update the capabilities of the open source software package Modules for Experiments in Stellar Astrophysics (MESA), and its one-dimensional stellar evolution module, MESA star. Improvements in MESA star's ability to model the evolution of giant planets now extends its applicability down to masses as low as one-tenth that of Jupiter. The dramatic improvement in asteroseismology enabled by the space-based Kepler and CoRoT missions motivates our full coupling of the ADIPLS adiabatic pulsation code with MESA star. This also motivates a numerical recasting of the Ledoux criterion that is more easily implemented when many nuclei are present at non-negligible abundances. This impacts the way in which MESA star calculates semi-convective and thermohaline mixing. We exhibit the evolution of 3-8 M ? stars through the end of core He burning, the onset of He thermal pulses, and arrival on the white dwarf cooling sequence. We implement diffusion of angular momentum and chemical abundances that enable calculations of rotating-star models, which we compare thoroughly with earlier work. We introduce a new treatment of radiation-dominated envelopes that allows the uninterrupted evolution of massive stars to core collapse. This enables the generation of new sets of supernovae, long gamma-ray burst, and pair-instability progenitor models. We substantially modify the way in which MESA star solves the fully coupled stellar structure and composition equations, and we show how this has improved the scaling of MESA's calculational speed on multi-core processors. Updates to the modules for equation of state, opacity, nuclear reaction rates, and atmospheric boundary conditions are also provided. We describe the MESA Software Development Kit that packages all the required components needed to form a unified, maintained, and well-validated build environment for MESA. We also highlight a few tools developed by the community for rapid visualization of MESA star results.

2,761 citations

Journal ArticleDOI
TL;DR: The Helioseismic and Magnetic Imager (HMI) instrument and investigation as a part of the NASA Solar Dynamics Observatory (SDO) is designed to study convection-zone dynamics and the solar dynamo, the origin and evolution of sunspots, active regions, and complexes of activity, the sources and drivers of solar magnetic activity and disturbances as mentioned in this paper.
Abstract: The Helioseismic and Magnetic Imager (HMI) instrument and investigation as a part of the NASA Solar Dynamics Observatory (SDO) is designed to study convection-zone dynamics and the solar dynamo, the origin and evolution of sunspots, active regions, and complexes of activity, the sources and drivers of solar magnetic activity and disturbances, links between the internal processes and dynamics of the corona and heliosphere, and precursors of solar disturbances for space-weather forecasts. A brief overview of the instrument, investigation objectives, and standard data products is presented.

2,242 citations

Journal ArticleDOI
TL;DR: The Michelson Doppler Imager (MDI) as mentioned in this paper was used to probe the interior of the Sun by measuring the photospheric manifestations of solar oscillations, revealing the static and dynamic properties of the convection zone and core.
Abstract: The Solar Oscillations Investigation (SOI) uses the Michelson Doppler Imager (MDI) instrument to probe the interior of the Sun by measuring the photospheric manifestations of solar oscillations. Characteristics of the modes reveal the static and dynamic properties of the convection zone and core. Knowledge of these properties will improve our understanding of the solar cycle and of stellar evolution. Other photospheric observations will contribute to our knowledge of the solar magnetic field and surface motions. The investigation consists of coordinated efforts by several teams pursuing specific scientific objectives. The instrument images the Sun on a 10242 CCD camera through a series of increasingly narrow spectral filters. The final elements, a pair of tunable Michelson interferometers, enable MDI to record filtergrams with a FWHM bandwidth of 94 mA. Normally 20 images centered at 5 wavelengths near the Ni I 6768 spectral line are recorded each minute. MDI calculates velocity and continuum intensity from the filtergrams with a resolution of 4″ over the whole disk. An extensive calibration program has verified the end-to-end performance of the instrument. To provide continuous observations of the longest-lived modes that reveal the internal structure of the Sun, a carefully-selected set of spatial averages are computed and downlinked at all times. About half the time MDI will also be able to downlink complete velocity and intensity images each minute. This high rate telemetry (HRT) coverage is available for at least a continuous 60-day interval each year and for 8 hours each day during the rest of the year. During the 8-hour HRT intervals, 10 of the exposures each minute can be programmed for other observations, such as measurements in MDI's higher resolution (1.25″) field centered about 160″ north of the equator; meanwhile, the continuous structure program proceeds during the other half minute. Several times each day, polarizers will be inserted to measure the line-of-sight magnetic field. MDI operations will be scheduled well in advance and will vary only during the daily 8-hour campaigns. Quick-look and summary data, including magnetograms, will be processed immediately. Most high-rate data will be delivered only by mail to the SOI Science Support Center (SSSC) at Stanford, where a processing pipeline will produce 3 Terabytes of calibrated data products each year. These data products will be analyzed using the SSSC and the distributed resources of the co-investigators. The data will be available for collaborative investigations.

2,154 citations

Journal ArticleDOI
TL;DR: The Helioseismic and Magnetic Imager (HMI) as discussed by the authors was designed to measure the Doppler shift, intensity, and vector magnetic field at the solar photosphere using the 6173 A FeI absorption line.
Abstract: The Helioseismic and Magnetic Imager (HMI) investigation (Solar Phys. doi: 10.1007/s11207-011-9834-2, 2011) will study the solar interior using helioseismic techniques as well as the magnetic field near the solar surface. The HMI instrument is part of the Solar Dynamics Observatory (SDO) that was launched on 11 February 2010. The instrument is designed to measure the Doppler shift, intensity, and vector magnetic field at the solar photosphere using the 6173 A Fe i absorption line. The instrument consists of a front-window filter, a telescope, a set of waveplates for polarimetry, an image-stabilization system, a blocking filter, a five-stage Lyot filter with one tunable element, two wide-field tunable Michelson interferometers, a pair of 40962 pixel cameras with independent shutters, and associated electronics. Each camera takes a full-disk image roughly every 3.75 seconds giving an overall cadence of 45 seconds for the Doppler, intensity, and line-of-sight magnetic-field measurements and a slower cadence for the full vector magnetic field. This article describes the design of the HMI instrument and provides an overview of the pre-launch calibration efforts. Overviews of the investigation, details of the calibrations, data handling, and the science analysis are provided in accompanying articles.

1,997 citations